Green Valley 160507 Rider 5 Aluminum Ski Carrier Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Green Valley 160507 Rider 5 Aluminum Ski Carrier. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

The Green Valley 160507 Rider 5 is an aluminum ski carrier designed for mounting on vehicle roof bars. It is capable of transporting up to 6 pairs of skis, 5 pairs of carving skis, 8 pairs of cross-country skis, or 4 snowboards. The carrier includes an integrated anti-theft system for security.

2. Safety Information

Adhering to safety guidelines is crucial when using roof-mounted equipment. Failure to follow these instructions may result in property damage, injury, or accidents.

• Vehicle Load Capacity: Never exceed the maximum load capacity specified by your vehicle manufacturer for the roof and roof bars.
• Carrier Load Capacity: Do not exceed the ski carrier's maximum load capacity (6 pairs of skis, 5 pairs of carving skis, 8 pairs of cross-country skis, or 4 snowboards).
• Secure Attachment: Always ensure the ski carrier is securely attached to the roof bars and that all skis/snowboards are firmly clamped before driving. Check tightness regularly, especially after the first few kilometers of travel.
• Driving Speed: Adjust your driving speed to suit road conditions, weather, and the load being carried. Avoid sudden braking or sharp turns.
• Height Clearance: Be aware of the increased height of your vehicle with the carrier and load, especially when entering garages, car washes, or low-clearance areas.
• Regular Checks: Periodically inspect the carrier for any signs of wear, damage, or loose components.

3. Package Contents

Please verify that all components are present before beginning installation:

• Green Valley 160507 Rider 5 Aluminum Ski Carrier (1 unit)
• Mounting hardware for roof bars (specific components may vary based on roof bar type)
• Keys for anti-theft locking system
• Instruction manual (this document)

4. Setup and Installation

The Green Valley 160507 Rider 5 is designed for universal fit on most vehicle roof bars. Ensure your roof bars are correctly installed and rated for the weight of the carrier and your equipment.

1. Prepare Roof Bars: Ensure your vehicle's roof bars are clean, dry, and securely fastened according to their manufacturer's instructions.
2. Position the Carrier: Place the ski carrier onto the roof bars. Adjust its position to ensure even weight distribution and optimal clearance for your vehicle's trunk or tailgate.
3. Attach Mounting Hardware: Use the provided mounting hardware to secure the carrier to the roof bars. Follow the specific instructions included with the mounting kit, as attachment methods can vary (e.g., T-slot adapters, U-bolts). Tighten all fasteners firmly but do not overtighten.
4. Test Security: After installation, gently shake the carrier to ensure it is firmly attached and does not move. Re-check all fasteners.
5. First Drive Check: Drive a short distance (e.g., 5-10 km) and then stop to re-check the tightness of all mounting hardware. Vibrations during travel can sometimes cause initial loosening.

Image 1: The Green Valley 160507 Rider 5 Aluminum Ski Carrier shown mounted on vehicle roof bars, securely holding several pairs of skis. The carrier features a sleek aluminum design and robust clamping mechanisms.

5. Operating Instructions

Proper loading and securing of your equipment are essential for safe transport.

1. Open the Carrier: Unlock the carrier using the provided key and lift the top arm.
2. Load Skis/Snowboards:
   • For skis, place them with the bindings facing upwards and alternating directions (tips forward, then tips backward) to optimize space and balance.
   • For snowboards, place them flat with bindings removed or folded down, ensuring they fit within the carrier's width.
   Ensure that no part of the skis or snowboards obstructs the driver's view or extends excessively beyond the vehicle's dimensions.
3. Close and Secure: Lower the top arm of the carrier over your equipment. Press down firmly until it clicks into place, indicating a secure clamp.
4. Lock the Carrier: Use the key to lock the carrier. This engages the anti-theft system and prevents the carrier from being opened unintentionally during transit. Remove the key after locking.
5. Pre-Trip Check: Before each trip, visually inspect that the carrier is locked and that all equipment is held firmly. Attempt to move the skis/snowboards by hand to confirm they are secure.

6. Maintenance

Regular maintenance will prolong the life of your ski carrier and ensure its continued safe operation.

• Cleaning: Clean the carrier with mild soap and water after each use, especially after exposure to road salt or harsh weather conditions. Rinse thoroughly and dry completely to prevent corrosion.
• Lubrication: Periodically apply a silicone-based lubricant to the locking mechanisms and moving parts to ensure smooth operation.
• Inspection: Regularly inspect all bolts, nuts, and clamps for tightness. Check rubber components for cracks or wear. Replace any damaged parts immediately.
• Storage: When not in use, store the ski carrier in a dry, protected area away from direct sunlight and extreme temperatures.

7. Troubleshooting

This section addresses common issues you might encounter.

• Carrier feels loose after installation: Re-check all mounting hardware. Ensure the roof bars are correctly installed and that the carrier's clamps are fully tightened.
• Skis/Snowboards are not securely held: Ensure the carrier's top arm is fully closed and locked. Verify that the equipment is placed correctly within the carrier's clamps and that the rubber grips are clean and intact.
• Key is stuck or lock is difficult to operate: Apply a small amount of graphite lubricant or a specialized lock lubricant into the keyhole. Do not force the key.
• Excessive wind noise: Ensure the carrier is installed as far back on the roof bars as possible without interfering with the trunk/tailgate. Check that all components are tightly secured.

8. Specifications

9. Warranty and Support

For warranty information, technical support, or to inquire about replacement parts, please refer to the official Green Valley website or contact your authorized retailer. Keep your proof of purchase for warranty claims.

Manufacturer: Aurilis

Brand: Green Valley