Introduction
This manual provides instructions for the proper installation and use of STANLEY 25-1228 Disposable Filter Bags. These bags are designed for use with 1-3.5 gallon STANLEY wet/dry vacuums, specifically compatible with model SL18136. Using these filter bags helps maintain vacuum performance and simplifies debris disposal.
Image: A pack of three STANLEY 25-1228 disposable filter bags, showing their brown paper construction and the circular inlet port.
Compatibility
The STANLEY 25-1228 disposable filter bags are specifically designed for 1-3.5 gallon wet/dry vacuums. They are compatible with the STANLEY SL18136 model. Ensure your vacuum model matches this specification for optimal performance and fit.
Image: STANLEY 25-1228 filter bags displayed alongside a STANLEY wet/dry vacuum cleaner, illustrating compatibility.
Installation Instructions
- Prepare the Vacuum: Ensure your wet/dry vacuum is unplugged and empty of any existing debris.
- Open the Vacuum: Remove the power head from the vacuum tank to access the interior.
- Unfold the Filter Bag: Gently unfold the STANLEY 25-1228 disposable filter bag.
- Position the Bag: Insert the filter bag into the vacuum tank. The cardboard collar of the bag should align with the inlet port inside the tank.
- Secure the Bag: Place the rubber seal and cardboard collar firmly around the vacuum's inlet port. Ensure a tight seal to prevent dust leakage.
- Close the Vacuum: Replace the power head and secure it properly.
Image: A two-step diagram illustrating the correct method for installing the disposable filter bag into a vacuum cleaner, showing how to position the bag's collar over the inlet port.
Operation and Benefits
Once installed, the STANLEY 25-1228 disposable filter bag effectively captures fine particles, including woodworking debris and renovation dust. This helps maintain consistent airflow and suction power in your vacuum. The use of these bags is particularly beneficial for dry vacuuming tasks, reducing the frequency of main filter cleaning and extending its lifespan.
Image: A split image comparing the interior of a vacuum tank with a disposable dust bag installed (clean) versus without a dust bag (dirty with debris), highlighting the benefit of using the bag for debris containment.
These bags are suitable for various dry cleanup scenarios, including:
- Home use: General household dust and dry debris.
- Outdoor use: Collecting dry leaves, sawdust, and other light outdoor debris.
- Workshop/Factory use: Managing dust from woodworking, drywall, or other small-scale renovation projects.
Image: A collage depicting various applications of a wet/dry vacuum, including cleaning indoors, outdoors, and in a workshop environment.
Maintenance and Replacement
The STANLEY 25-1228 filter bags are disposable. For optimal vacuum performance and filtration efficiency, it is recommended to replace the bags regularly. Replace the bag when it is full or when you notice a decrease in suction power. Do not attempt to clean or reuse these disposable bags.
To replace a full bag:
- Unplug the vacuum cleaner.
- Remove the power head.
- Carefully remove the full disposable bag from the inlet port, ensuring minimal dust escape.
- Dispose of the full bag according to local waste disposal guidelines.
- Install a new STANLEY 25-1228 disposable filter bag following the installation instructions.
Troubleshooting
- Reduced Suction:
- Check if the filter bag is full and needs replacement.
- Ensure the filter bag is properly seated and sealed around the inlet port.
- Inspect the vacuum hose and attachments for blockages.
- Dust Escaping from Vacuum:
- Verify that the filter bag is correctly installed and the cardboard collar forms a tight seal with the vacuum's inlet.
- Check for any tears or damage to the filter bag. Replace if damaged.
- Bag Does Not Fit:
- Confirm that your vacuum is a 1-3.5 gallon STANLEY wet/dry vacuum, specifically model SL18136. These bags are designed for specific models.
- Ensure the bag is unfolded completely before attempting installation.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 25-1228 |
| Brand | Stanley |
| Compatible Vacuum Models | STANLEY SL18136 (1-3.5 Gallon Wet/Dry Vacuums) |
| Material | Paper |
| Color | Brown |
| Dimensions (L x W) | 21.7 inches x 7.8 inches (approx.) |
| Port Interface Diameter | 1-1/4 inches (approx.) |
| Item Weight | 120 g (per pack of 3) |
| Package Quantity | 3 bags per package |
| Special Features | Disposable, Efficient Dust Containment |
Image: A diagram illustrating the dimensions of the STANLEY 25-1228 filter bag, including its length (21.7 inches), width (7.8 inches), and port diameter (1-1/4 inches).
Warranty Information
Specific warranty details for the STANLEY 25-1228 Disposable Filter Bags are not provided in the product information. For inquiries regarding warranty, please contact the manufacturer directly using the support information below.
Support and Contact Information
For replacement parts or further assistance, please contact Alton Industries, the manufacturer of STANLEY accessories:
- Toll-Free Helpline: 1-888-899-0146 (USA & Canada)
- Email: info@altonindustries.com
- Website: www.altonindustries.com
Image: A close-up of the STANLEY 25-1228 filter bag packaging, displaying contact information for Alton Industries, including phone numbers and email addresses for support in USA and Canada.
