1. Introduction
This manual provides essential information for the proper installation, use, and maintenance of your Pirelli MT16 Rear Tire (120/100-18). The Pirelli MT16 is designed to deliver reliable traction across a diverse range of surfaces, making it suitable for both recreational and competitive off-road riding. Adhering to these instructions will help ensure optimal performance and longevity of your tire.
2. Safety Information
Always prioritize safety when handling and installing tires. Incorrect installation or use can lead to serious injury or product failure.
- Professional Installation: Tire mounting should always be performed by a qualified professional using appropriate tools and safety procedures.
- Inflation Pressure: Maintain correct tire inflation pressure as specified by your vehicle manufacturer. Refer to your vehicle's owner's manual.
- Load and Speed Ratings: Do not exceed the tire's maximum load capacity or speed rating.
- Inspection: Regularly inspect tires for cuts, punctures, bulges, or excessive wear. Replace damaged or excessively worn tires immediately.
- Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
3. Setup and Installation
Proper installation is crucial for tire performance and safety. It is strongly recommended that tire mounting be performed by a certified technician.
- Rim Compatibility: Ensure the tire size (120/100-18) is compatible with your motorcycle's rim. The recommended rim width for this tire is approximately 11.27 inches.
- Direction of Rotation: Observe the rotation arrow on the tire sidewall and mount the tire accordingly.
- Lubrication: Use appropriate tire mounting lubricant to prevent damage during installation.
- Inflation: Inflate the tire to the recommended pressure for seating the beads, then adjust to the vehicle manufacturer's specified operating pressure. Never exceed the maximum inflation pressure indicated on the tire sidewall.
Image 1: The Pirelli MT16 Rear Tire (120/100-18) showcasing its robust, block-style tread pattern designed for off-road traction. The tire is mounted on a spoked motorcycle wheel, highlighting its application.
4. Operating Guidelines
The Pirelli MT16 is a bias-ply, tube-type tire engineered for off-road performance.
- Intended Use: This tire is designed for off-road conditions, providing excellent traction on various terrains including dirt, mud, and rocky surfaces.
- Break-in Period: A short break-in period is recommended for new tires to allow the tread surface to scuff and achieve optimal grip. Avoid aggressive riding immediately after installation.
- Tire Pressure: Adjust tire pressure according to riding conditions and terrain. Lower pressures can increase traction off-road but may reduce stability and increase the risk of pinch flats. Always consult your vehicle's manual for recommended pressure ranges.
5. Maintenance
Regular maintenance extends tire life and ensures safe operation.
- Tire Pressure Checks: Check tire pressure before each ride, or at least weekly, using an accurate gauge.
- Tread Wear Inspection: Monitor tread depth regularly. Replace the tire when the tread wear indicators are visible or when tread depth is below legal or safe limits for off-road use.
- Damage Inspection: Inspect the tire for any signs of damage such as cuts, cracks, bulges, or embedded objects. Any significant damage warrants immediate professional inspection and potential replacement.
- Cleaning: Clean tires with mild soap and water. Avoid harsh chemicals that can degrade rubber compounds.
6. Troubleshooting
This section addresses common issues you might encounter with your tire.
- Rapid or Uneven Wear: This can be caused by incorrect tire pressure, improper suspension settings, or aggressive riding styles. Verify tire pressure and consult a professional for suspension adjustments.
- Loss of Air Pressure: Check for punctures, valve stem leaks, or bead seating issues. If a puncture is suspected, have the tire professionally inspected and repaired or replaced.
- Poor Traction: Ensure tire pressure is appropriate for the terrain. Inspect tread for excessive wear or damage.
For any persistent or severe issues, seek assistance from a qualified motorcycle technician.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Pirelli |
| Model | MT16 |
| Size | 120/100-18 |
| Section Width | 120 Millimeters |
| Tread Type | Non-Directional |
| Rim Width (Approx.) | 11.27 Inches |
| Tire Diameter | 18 inches |
| Construction Type | Bias-Ply |
| Item Weight | 6 Kilograms (13.2 pounds) |
| OEM Part Number | 1418600 |
| Global Trade Identification Number (GTIN) | 08019227141863 |
8. Warranty Information
Specific warranty terms for Pirelli tires are typically provided by the manufacturer or the authorized retailer at the time of purchase. Please retain your proof of purchase. For detailed warranty information, refer to the documentation included with your tire or visit the official Pirelli website.
9. Support
For technical assistance, product inquiries, or support regarding your Pirelli MT16 tire, please contact:
- Your authorized Pirelli dealer or the retailer from whom you purchased the tire.
- The official Pirelli customer service channels, which can typically be found on the Pirelli website (www.pirelli.com).
