XP Deus LCD Remote Control Display User Manual

1. Introduction

This manual provides detailed instructions for the XP Deus LCD Remote Control Display. This device serves as the primary interface for controlling the XP Deus metal detector, featuring a back-lit display and an integrated audio speaker. It is designed as a direct replacement or standard component for the XP Deus system, ensuring full compatibility and seamless integration.

Figure 1: Angled view of the XP Deus LCD Remote Control Display. This image shows the device from an angle, highlighting its ergonomic design, the main display screen, and the arrangement of its control buttons.

2. Product Overview

The XP Deus LCD Remote Control Display is a sophisticated control unit for the XP Deus metal detector. It features a clear, back-lit LCD screen for displaying detection information, settings, and menus. An integrated audio speaker provides audible alerts and tones, enhancing the user's detection experience. The unit is equipped with various control buttons for navigation and selection, allowing for precise adjustment of detector parameters.

Figure 2: Front view of the XP Deus LCD Remote Control Display. This image provides a direct view of the device's front panel, clearly showing the LCD screen, the power button, and the array of control buttons for menu navigation and setting adjustments.

Key Features:

• Back-lit LCD display for clear visibility in various lighting conditions.
• Integrated audio speaker for immediate target response.
• Ergonomic design for comfortable handling.
• Intuitive button control for easy navigation and setting adjustments.
• Powered by an included Lithium Polymer battery.

3. Setup

3.1. Initial Charging

The remote control display comes with a pre-installed Lithium Polymer battery. Before first use, it is recommended to fully charge the device. Connect the provided charging cable to the charging port on the remote control and to a suitable USB power source. The display will indicate charging status.

3.2. Attaching to the Metal Detector (Optional)

The remote control can be used handheld or attached to the shaft of your XP Deus metal detector using the appropriate mounting bracket (sold separately or included with the detector kit). Ensure the remote control is securely fastened to prevent accidental drops during use.

Figure 3: XP Deus LCD Remote Control Display mounted on a metal detector shaft. This image illustrates how the remote control integrates with the full metal detector assembly, showing its position on the shaft for convenient access during operation.

3.3. Pairing with the XP Deus Coil

For the remote control to function, it must be paired wirelessly with the XP Deus search coil. Refer to your main XP Deus metal detector manual for specific instructions on the pairing process. Generally, this involves powering on both devices and initiating a pairing sequence through the remote control's menu.

4. Operating Instructions

4.1. Power On/Off

• To power on: Press and hold the power button (usually located at the bottom left of the control panel) until the display illuminates.
• To power off: Press and hold the power button until the device shuts down.

4.2. Navigating the Menu

The remote control features a series of buttons for menu navigation:

• Arrow Buttons: Use the up, down, left, and right arrow buttons to navigate through menu options and adjust settings.
• Menu Button: Typically used to access the main menu or confirm selections.
• Option Button: May provide quick access to frequently used settings or contextual options.

Detailed information on specific menu functions and settings (e.g., discrimination, sensitivity, ground balance, frequency) can be found in the comprehensive XP Deus metal detector user manual.

4.3. Audio Speaker

The integrated speaker provides audible feedback for detected targets. Volume can typically be adjusted through the remote control's menu settings. For private listening or in noisy environments, headphones can be connected to the appropriate port (if available) or used wirelessly with compatible XP Deus headphones.

5. Maintenance

5.1. Cleaning

Wipe the remote control display and casing with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the screen or casing. Ensure the charging port and any other openings are free from dirt and debris.

5.2. Storage

When not in use, store the remote control in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan. Avoid storing in environments with high humidity.

5.3. Battery Care

The Lithium Polymer battery is designed for long life. To maximize battery health, avoid fully discharging the battery frequently. Recharge the device as needed. If the battery performance significantly degrades over time, contact XP METAL DETECTORS support for service options.

6. Troubleshooting

6.1. Display Not Turning On

• Ensure the battery is charged. Connect the device to a charger and wait a few minutes before attempting to power on again.
• Check the power button for any obstruction or damage.

6.2. No Audio from Speaker

• Verify that the volume setting in the menu is not set to zero or muted.
• Ensure no headphones are plugged in, which might disable the internal speaker.
• Check for any physical obstruction in the speaker grille.

6.3. Remote Control Not Connecting to Coil

• Ensure both the remote control and the search coil are powered on.
• Repeat the pairing procedure as outlined in the main XP Deus metal detector manual.
• Check for any strong electromagnetic interference in the immediate vicinity.

6.4. Erratic Behavior

• Try restarting the remote control.
• Ensure the firmware is up to date. Refer to the XP METAL DETECTORS website for firmware update instructions.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official XP METAL DETECTORS website or contact their customer service directly. Keep your proof of purchase for warranty claims.

You can visit the official XP METAL DETECTORS store for more information: XP METAL DETECTORS Store