CalExotics Thrusting Jack Rabbit Vibrator Instruction Manual

1. Introduction

Thank you for choosing the CalExotics Thrusting Jack Rabbit Vibrator. This device is designed to provide a multi-sensory experience with its unique combination of thrusting, rotating, and vibrating functions. This manual provides essential information for the safe and effective use, care, and maintenance of your product.

2. Safety Information

• Read all instructions before use: Familiarize yourself with the product's features and operation.
• Battery Safety: Use only the specified battery type (3 AA batteries). Do not mix old and new batteries, or different types of batteries. Remove batteries if the product will not be used for an extended period.
• Cleaning: Clean the product thoroughly before and after each use with warm water and mild soap, or a specialized toy cleaner. Ensure the battery compartment is sealed before cleaning.
• Storage: Store the product in a clean, dry place away from direct sunlight and extreme temperatures.
• Discontinue Use: If you experience any discomfort or irritation, discontinue use immediately.
• Product Integrity: Do not attempt to disassemble or modify the product. This may void the warranty and pose safety risks.

3. Product Overview

The CalExotics Thrusting Jack Rabbit Vibrator features a unique design for comprehensive stimulation. It includes a main shaft with rotating beads, a flexible rabbit-shaped clitoral stimulator, and an intuitive control panel.

Figure 1: Front view of the vibrator with control panel.

Figure 2: Side view showing the rabbit stimulator and shaft.

Key Features:

• Dual Motors: Independent motors for vibration and thrusting/rotation.
• 8 Vibration Functions: Multiple patterns and intensities for clitoral stimulation.
• 8 Thrusting Speeds: Adjustable thrusting motion for internal stimulation.
• Rotating Shaft: Features two rows of rotating beads for enhanced sensation.
• Flexible Rabbit Stimulator: Designed for external clitoral focus.
• Water Resistant: Suitable for easy cleaning.

4. Setup

Battery Installation:

1. Locate the battery compartment cover, typically at the base of the handle.
2. Twist or slide the cover open according to the markings.
3. Insert 3 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Securely close the battery compartment cover to ensure water resistance.

Note: Always use fresh batteries for optimal performance. Remove batteries if the device will not be used for an extended period.

5. Operating Instructions

The device features an intuitive control panel with distinct buttons for various functions.

Control Panel Functions:

• Power Button (Circular button with a circle icon): Press and hold to turn the device ON or OFF.
• Vibration Control (Button with wave icon): Press to cycle through 8 distinct vibration patterns and intensities for the rabbit stimulator.
• Thrusting/Rotation Control (Up/Down arrow buttons): Use the up and down arrows to adjust the speed of the thrusting and rotating shaft. There are 8 thrusting speeds available.

Experiment with different combinations of vibration and thrusting speeds to find your preferred settings.

6. Maintenance

Cleaning:

1. Before cleaning, ensure the device is turned off and the battery compartment is securely closed.
2. Wash the product thoroughly with warm water and a mild, antibacterial soap.
3. Alternatively, use a specialized toy cleaner for disinfection.
4. Rinse thoroughly with clean water.
5. Pat dry with a lint-free cloth or allow to air dry completely before storage.

Storage:

• Store the device in a clean, dry, and dust-free environment.
• Keep away from direct sunlight, extreme temperatures, and harsh chemicals.
• Ensure the device is completely dry before storing.

7. Troubleshooting

• Device does not turn on:
  • Ensure batteries are inserted correctly with the correct polarity.
  • Replace with fresh AA batteries.
  • Check if the battery compartment cover is fully closed.
• Vibrations are weak or inconsistent:
  • Replace batteries with fresh ones.
  • Ensure the battery compartment is clean and free of corrosion.
• Thrusting or rotation function is not working:
  • Verify that the device has fresh batteries.
  • Ensure no debris is obstructing the rotating shaft.
  • If the issue persists after checking batteries, contact customer support.

8. Specifications

Figure 3: Product dimensions for reference.

9. Warranty and Support

CalExotics is committed to providing quality products. While specific warranty details are not provided in this manual, for any product inquiries, technical support, or warranty claims, please contact CalExotics customer service directly through their official website or the retailer where the product was purchased. Please retain your proof of purchase for any support requests.