Oster 006859-013-000 Core Blender 16 Speed User Manual

1. Introduction

Thank you for choosing the Oster 006859-013-000 Core Blender 16 Speed. This manual provides essential information for the safe and efficient use of your new appliance. Please read all instructions carefully before operating the blender and retain this manual for future reference.

Important Safety Instructions

• Always unplug the blender from the electrical outlet before assembling, disassembling, or cleaning.
• Do not immerse the motor base in water or other liquids.
• Avoid contact with moving parts. Keep hands and utensils out of the blender jar while blending to prevent personal injury and damage to the blender.
• Ensure the lid is securely in place before operating the blender.
• Do not blend hot liquids in large quantities as they may cause pressure buildup and result in scalding.
• This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Close supervision is necessary when any appliance is used by or near children.

2. Product Overview

The Oster Core Blender is designed for versatile blending tasks, featuring a powerful motor and multiple speed settings. Familiarize yourself with the components:

• Motor Base: Contains the powerful 450W motor and control panel.
• Boroclass Glass Jar: A 1.5L (6 cups) capacity heat-resistant glass jar designed to withstand temperature changes.
• Lid: Secures the contents during blending.
• Filler Cap: Allows adding ingredients during blending.
• Blade Assembly: Innovative stainless steel blade for crushing ice and blending various ingredients.
• All Metal Drive System: Exclusive metal-to-metal coupling for enhanced durability.

Figure 2.1: The Oster 006859-013-000 Core Blender 16 Speed, showing the motor base, glass jar, and lid. The jar is filled with various fruits, demonstrating its use.

Key Features

• Powerful 450W motor for efficient processing.
• 16-speed settings for precise control.
• Pulse function for intermittent blending.
• Boroclass refractory glass tumbler (1.5L) resistant to thermal shock.
• Durable All Metal Drive system.
• Stainless steel blade capable of crushing ice.

3. Setup and Assembly

Before first use, wash the blender jar, lid, and blade assembly in warm, soapy water. Rinse thoroughly and dry. Ensure all parts are completely dry before assembly.

1. Place the Motor Base: Position the motor base on a clean, dry, and stable surface. Ensure it is unplugged from the power outlet.
2. Assemble the Blade: If disassembled, place the sealing ring onto the blade assembly, then screw the blade assembly onto the bottom of the glass jar. Ensure it is tightened securely to prevent leaks.
3. Place the Jar: Carefully place the assembled glass jar onto the motor base. Ensure it is seated correctly and securely.
4. Secure the Lid: Place the lid onto the glass jar and press down firmly to ensure a tight seal. Insert the filler cap into the lid opening.

Your blender is now ready for use.

4. Operating Instructions

Follow these steps for safe and effective blending:

1. Prepare Ingredients: Cut solid ingredients into small pieces (approximately 1-inch cubes) for optimal blending. Add liquids first, then soft ingredients, followed by hard ingredients and ice. Do not overfill the jar beyond the maximum fill line (1.5L).
2. Secure Lid: Ensure the lid and filler cap are securely in place.
3. Plug In: Plug the blender into a suitable 220V AC electrical outlet.
4. Select Speed: Use the control buttons on the motor base to select your desired speed (1-16). Start with lower speeds for thicker mixtures and gradually increase as needed.
5. Pulse Function: For short bursts of power or to chop ingredients, use the "Pulse" button. Hold it down for desired duration and release.
6. Blending: Allow the blender to run until the desired consistency is achieved. If ingredients stick, turn off the blender, remove the lid, and use a spatula to push ingredients towards the blades. Replace lid before continuing.
7. Adding Ingredients During Blending: For adding ingredients while blending, remove the filler cap and carefully drop items through the opening. Replace the filler cap immediately.
8. Finish Blending: Once blending is complete, turn the speed selector to "OFF" (0) and unplug the blender from the outlet.

Figure 4.1: Close-up view of the Oster 006859-013-000 Core Blender's control panel, showing the 16-speed buttons and the pulse function.

Recommended Uses

• Blending: Smoothies, shakes, purees.
• Creams: Whipping cream or making creamy sauces.
• Ice Crush: Crushing ice for beverages.
• Mixing: Combining ingredients for batters or dressings.

5. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the life of your blender. Always unplug the appliance before cleaning.

Cleaning the Jar and Lid

1. Disassemble: Remove the jar from the motor base. Unscrew the blade assembly from the bottom of the jar. Remove the sealing ring.
2. Wash: Wash the glass jar, lid, filler cap, blade assembly, and sealing ring in warm, soapy water. You may also place these parts on the top rack of a dishwasher.
3. Rinse and Dry: Rinse all parts thoroughly and dry completely before reassembling or storing.

Cleaning the Motor Base

• Wipe the motor base with a damp cloth. Do not immerse the motor base in water or any other liquid.
• Do not use abrasive cleaners or scouring pads, as they may scratch the surface.
• Ensure the motor base is completely dry before plugging it back in or storing.

6. Troubleshooting

If you encounter issues with your blender, refer to the table below for common problems and solutions.

7. Specifications

8. Warranty and Support

This Oster blender comes with a manufacturer's guarantee. Please refer to the included "Guarantee" document for specific terms, conditions, and duration of the warranty.

For technical assistance, spare parts, or warranty claims, please contact Oster customer support. Contact information can typically be found on the product packaging or the official Oster website.

When contacting support, please have your model number (006859-013-000) and proof of purchase readily available.