1. Introduction
This user manual provides essential information for the proper installation, function, and maintenance of the AED A2710 Front Engine Mount. Please read these instructions carefully before proceeding with installation or any related procedures to ensure safety and optimal performance.
2. Product Overview
The AED A2710 is a high-quality front engine mount designed to secure the engine within the vehicle's chassis, reducing vibration and supporting the engine's weight. Manufactured by DEA Products, Inc., this mount is built to meet or exceed original equipment specifications, ensuring durability and reliable performance.
Image 1: The AED A2710 Front Engine Mount, a black rubber and metal component with threaded studs for attachment.
3. Vehicle Compatibility
The AED A2710 Front Engine Mount is compatible with the following vehicle models. It is crucial to verify that this part fits your specific vehicle application before installation.
- Dodge D100/D150/D200/D250/D300/D350: 1989 - 1993 (Front Left and Right Motor Mount)
- Dodge W100/W150/W200/W250/W300/W350: 1989 - 1993 (Front Left and Right Motor Mount)
Always consult your vehicle's service manual or a qualified mechanic to confirm compatibility.
4. Setup and Installation
Installation of an engine mount requires mechanical expertise and appropriate tools. If you are not confident in your ability to perform this installation, it is recommended to seek professional assistance.
4.1 Safety Precautions
- Ensure the vehicle is on a stable, level surface and properly supported with jack stands.
- Disconnect the vehicle's battery to prevent accidental electrical discharge.
- Wear appropriate personal protective equipment, including safety glasses and gloves.
- Use a suitable engine support tool or jack to safely support the engine's weight during mount replacement.
4.2 General Installation Steps (Consult Vehicle Service Manual for Specifics)
- Locate the existing engine mount(s) that need replacement.
- Carefully support the engine using an engine hoist or a jack with a wooden block under the oil pan, ensuring not to damage the pan.
- Remove the bolts securing the old engine mount to the engine and the vehicle frame.
- Remove the old engine mount.
- Position the new AED A2710 engine mount in place.
- Install the bolts, hand-tightening them initially.
- Lower the engine slowly, ensuring the mount aligns correctly.
- Torque all bolts to the manufacturer's specified values. Refer to your vehicle's service manual for exact torque specifications.
- Remove the engine support.
- Reconnect the battery.
5. Operating Principles
Once installed, the AED A2710 Front Engine Mount functions passively to absorb engine vibrations and maintain the engine's position. There are no active "operating" steps for the mount itself. Its performance is integral to the vehicle's overall ride comfort and structural integrity.
6. Maintenance
Engine mounts are wear-and-tear components. Regular inspection is recommended to ensure continued performance and safety.
- Visual Inspection: Periodically check the engine mount for signs of wear, cracking, tearing of the rubber, or excessive corrosion of metal components.
- Vibration Check: Increased engine vibration felt in the cabin, especially during acceleration or idling, can indicate a failing engine mount.
- Professional Assessment: If any issues are suspected, have the engine mounts inspected by a qualified mechanic.
No specific lubrication or cleaning is required for the engine mount itself.
7. Troubleshooting
If you experience symptoms that suggest an issue with your engine mount, consider the following:
| Symptom | Possible Cause | Action |
|---|---|---|
| Excessive engine vibration | Worn or damaged engine mount rubber. | Inspect mount for damage. Consider replacement. |
| Clunking or banging noises from engine bay | Completely failed engine mount, allowing engine movement. | Immediate inspection and replacement recommended. |
| Engine appears to shift excessively | Mount not properly secured or severely damaged. | Verify bolt torque. Inspect mount for failure. |
For persistent issues, consult a certified automotive technician.
8. Specifications
| Attribute | Value |
|---|---|
| Model Number | A2710 |
| Brand | AED (Manufactured by DEA Products) |
| Item Weight | 2.55 pounds (approx. 1.16 kg) |
| Product Dimensions (L x W x H) | 4.82 x 4.64 x 4.1 inches (approx. 12.24 x 11.79 x 10.41 cm) |
| UPC | 139861208703 |
| Manufacturer Part Number | A2710 |
| OEM Part Number | A2710 |
9. Warranty Information
Specific warranty details for the AED A2710 Front Engine Mount are typically provided by the manufacturer, DEA Products, Inc., or the retailer at the time of purchase. Generally, engine mounts are covered against manufacturing defects for a limited period. Please retain your proof of purchase for any warranty claims.
For detailed warranty terms and conditions, refer to the documentation included with your purchase or contact the seller/manufacturer directly.
10. Customer Support
If you have questions regarding the AED A2710 Front Engine Mount, its compatibility, installation, or require technical assistance, please contact the retailer or the manufacturer, DEA Products, Inc. (often branded as AED for this product line).
For general automotive repair advice, it is recommended to consult a certified professional mechanic.
