1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Phylrich K158D/26D Carrara Widespread Bathroom Faucet. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product. Retain this manual for future reference.
This image displays the Phylrich K158D/26D widespread bathroom faucet. It features a central gooseneck spout and two separate handles, each with a white, marble-patterned lever. The faucet components are finished in a satin chrome color.
2. Safety Information
Always observe the following safety precautions during installation and use:
- Read all instructions carefully before installation.
- If you are unsure about any part of the installation process, it is recommended to consult a qualified professional plumber.
- Turn off the main water supply to the installation area before beginning any work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- Ensure all connections are secure and watertight to prevent leaks.
3. Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Phylrich customer service.
- Faucet Spout Assembly
- Hot Water Handle Assembly
- Cold Water Handle Assembly
- Mounting Hardware (washers, nuts)
- Flexible Supply Lines (typically included or required separately)
- Drain Assembly (may be included or sold separately)
4. Setup and Installation
4.1 Pre-Installation
- Tools Required: Adjustable wrench, plumber's putty or silicone sealant, Phillips screwdriver, basin wrench (optional), measuring tape.
- Water Supply: Ensure the main water supply to the bathroom is turned off. Open nearby faucets to relieve pressure.
- Sink Preparation: Clean the faucet mounting holes on your sink or countertop.
4.2 Faucet Installation Steps
- Install Spout: Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet spout. Insert the spout through the center hole of the sink/countertop. From underneath, secure with the provided washer and mounting nut. Tighten firmly but do not overtighten.
- Install Handles: Repeat the process for the hot and cold water handles, inserting them into the left and right holes respectively. Ensure the handles are oriented correctly for operation. Secure from underneath with washers and mounting nuts.
- Connect Supply Lines: Attach the flexible supply lines to the threaded inlets on the underside of the faucet spout and handles. Connect the other ends of the supply lines to the hot and cold water shut-off valves. Use an adjustable wrench to tighten connections, ensuring they are snug but not over-tightened to avoid stripping threads.
- Install Drain Assembly (if applicable): Follow the instructions provided with your specific drain assembly. Typically, this involves placing the drain body into the sink hole with plumber's putty or a gasket, and securing it from underneath.
- Test for Leaks: Slowly turn on the main water supply. Check all connections for leaks. If leaks are present, gently tighten the connections until they stop.
- Flush Faucet: Remove the aerator from the spout. Turn on both hot and cold water to full flow for a few minutes to flush out any debris from the water lines. Turn off the water, reattach the aerator.
5. Operating Instructions
The Phylrich K158D/26D faucet features a widespread design with separate hot and cold handles for precise control.
- Turning On/Off: Rotate the hot water handle (typically on the left) counter-clockwise to open and clockwise to close. Rotate the cold water handle (typically on the right) counter-clockwise to open and clockwise to close.
- Adjusting Temperature: Mix hot and cold water by adjusting both handles simultaneously until the desired water temperature is achieved.
- Adjusting Flow: The water flow rate is controlled by how far the handles are rotated.
6. Maintenance and Care
Proper care will help maintain the finish and performance of your Phylrich faucet.
- Cleaning the Finish: Clean the faucet regularly with a soft, damp cloth and mild soap. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, bleach, or any cleaners containing alcohol or harsh chemicals, as these can damage the satin chrome finish and Carrara handles.
- Aerator Maintenance: Periodically unscrew the aerator from the spout and clean any mineral deposits or debris that may have accumulated. Rinse it under running water and reattach.
- Handle Care: The Carrara handles should be cleaned with the same gentle method as the faucet body. Avoid strong impacts to prevent chipping or cracking.
7. Troubleshooting
Refer to the following common issues and solutions before contacting customer service.
| Problem | Possible Cause | Solution |
|---|---|---|
| Faucet leaks from base or connections | Loose connections; Worn O-rings or gaskets | Tighten connections gently; Replace O-rings or gaskets if worn. |
| Low water flow | Clogged aerator; Partially closed shut-off valve; Debris in supply lines | Clean aerator; Ensure shut-off valves are fully open; Flush supply lines. |
| Handles are stiff or difficult to turn | Mineral buildup; Worn cartridge | Clean around handle base; Replace cartridge if necessary (consult professional). |
| Water temperature not consistent | Improper adjustment of hot/cold supply; Water heater issues | Adjust hot and cold handles; Check water heater settings. |
8. Specifications
- Model Number: K158D/26D
- Brand: Phylrich
- Finish: Satin Chrome
- Handle Placement: Widespread
- Item Package Quantity: 1
- Date First Available: November 15, 2011
9. Warranty and Support
For specific warranty information regarding your Phylrich K158D/26D Carrara Widespread Bathroom Faucet, please refer to the documentation included with your purchase or visit the official Phylrich website. Warranty terms and conditions may vary.
If you require technical assistance, replacement parts, or have questions not covered in this manual, please contact Phylrich customer support directly through their official channels.
