Product Overview
The Westbrass 593244-12 is a polypropylene insert style, tip-toe bath waste assembly designed for bathtubs. It features polypropylene ferrules and slip joint nuts for adaptable installation with various tub overflows. The insert style drain simplifies assembly. This unit includes an overflow and a tip-toe stopper, available in multiple finishes to match different bathroom decors. Its design is ADA approved.
Figure 1: Westbrass 593244-12 Bathtub Waste & Overflow Assembly, Oil Rubbed Bronze finish.
Installation Instructions
This assembly features an insert style drain for straightforward installation. For detailed steps, refer to the official installation manual. Key components include polypropylene tubes, slip joint connections, an ADA approved tip-toe drain, and a two-hole faceplate.
- Ensure all components are present: 1-1/2 inch x 14 inch bath waste assembly with white polypropylene tubes, slip joint connections, ADA approved tip-toe drain, two-hole faceplate with two 1/4 inch-20 x 1-1/2 inch plated brass color matching screws, two-hole elbow, shoe, and tee.
- The insert style drain simplifies the assembly process.
- Proper sealing is crucial. Use plumber's putty or silicone as recommended for watertight connections.
- Tighten all connections securely but avoid over-tightening to prevent damage to plastic components.
Figure 2: Technical diagram showing dimensions and components of the Westbrass 593244 assembly.
For a comprehensive guide, download the official Installation Manual (PDF).
Operation
The tip-toe drain plug operates with a simple push mechanism. To close the drain and retain water in the tub, press the top of the drain plug once. To open the drain and allow water to flow out, press the top of the drain plug again.
Maintenance
Regular cleaning of the drain plug and surrounding area is recommended to prevent buildup and ensure smooth operation. The tip-toe drain plug can be unscrewed for cleaning.
Troubleshooting
Leaking Tip-Toe Bathtub Drain
If your tip-toe bathtub drain is leaking, it may be due to the tip-toe washer not properly engaging with the stopper, allowing water to leak past. This can often be resolved by tightening the internal screw of the drain stopper.
Video: Troubleshooting Leaking Tip-Toe Bathtub Drain. This video demonstrates how to access and tighten the internal screw of the drain stopper to resolve leaks.
Steps to Resolve Leaking:
- Fully open the drain plug.
- Remove the cover cap from the drain plug. This may involve unscrewing it or pulling it off depending on the design. Alternatively, remove the entire cartridge from the drain body.
- Locate the screw inside the drain plug mechanism.
- Using a screwdriver, tighten this screw. This will help ensure the washer properly engages.
- Reinstall the cover cap or the cartridge and the drain plug.
For further troubleshooting, consult the official Troubleshooting Guide (PDF).
Specifications
| Feature | Detail |
|---|---|
| Brand | Westbrass |
| Model Number | 593244-12 |
| Material | Polypropylene, Brass |
| Color | Oil Rubbed Bronze |
| Product Dimensions | 1.5"W x 14"H |
| Item Weight | 0.01 Ounces |
| Style | Tip-Toe Drain |
| Installation Method | Silicone; Wrench |
| Included Components | (1) - Bath Waste & Overflow Assembly |
| Country of Origin | China |
| UPC | 747028683838 |
Warranty Information
This Westbrass product is covered by a 1-year limited warranty. For full details regarding warranty coverage, terms, and conditions, please refer to the official warranty document.
Download the official Warranty (PDF).
Customer Support
For additional assistance, technical support, or to inquire about replacement parts, please visit the official Westbrass website or contact their customer service department. You can also find more information and products on the Westbrass Storefront on Amazon.
