Graco FFT210 RAC X Reversible Tip Instruction Manual

1. Introduction

The Graco FFT210 RAC X Reversible Tip is designed for use with airless paint spray guns. This tip is engineered to provide a long service life, a superior fan pattern, and a high-quality finish for various painting applications. Its reversible design facilitates easy clearing of clogs, enhancing productivity.

Image of the Graco FFT210 RAC X Reversible Tip. The tip features a green plastic housing with "FFT 210" embossed on it, indicating its model and fan size. The Graco 'G' logo is visible on the stem. The lower part of the tip is a silver metallic component, designed for secure attachment to a spray gun guard.

2. Safety Information

Observe the following safety precautions when using the Graco FFT210 RAC X Reversible Tip:

• Do not spray near face or eyes. Always wear appropriate personal protective equipment, including eye protection.
• Use in a well-ventilated area to prevent inhalation of paint fumes.
• Do not puncture or burn the container of paint or solvents.
• Store the tip and associated materials in a cool, dry place.
• Keep out of reach of children.
• Always relieve pressure from the airless spray system before installing, removing, or cleaning the tip.

3. Setup and Installation

Proper installation of the RAC X Reversible Tip is crucial for optimal performance and safety.

1. Ensure System is Depressurized: Before handling the spray gun or tip, ensure the airless spray system is completely depressurized according to your spray gun's manual.
2. Insert OneSeal: The RAC X SwitchTips include an exclusive OneSeal. Ensure this seal is correctly seated in the tip base. No tools are required for this step.
3. Install Tip into Guard: Insert the FFT210 tip into a compatible Graco RAC X spray gun guard. The superior locking tab design ensures the tip remains securely in place during operation.
4. Secure Guard: Attach the spray gun guard, with the tip installed, onto the airless spray gun. Hand-tighten securely.
5. Verify Compatibility: Confirm that the FFT210 tip is compatible with your specific airless spray gun model and guard. Refer to your spray gun's manual for compatibility details.

4. Operating Instructions

The FFT210 tip is designed for specific applications to achieve a fine finish.

• Tip Designation: The "FFT210" designation indicates a Fine Finish Tip (FFT) with a 4-inch fan width (when sprayed from 12 inches away) and a 0.010-inch orifice diameter. The '2' in '210' refers to a 4-inch fan, and the '10' refers to a 0.010-inch orifice.
• Fan Pattern: This tip produces a 4-inch fan pattern (at 12 inches from the surface) with a 0.010-inch orifice, ideal for precise applications and achieving a smooth finish on smaller surfaces or detailed work.
• Application: Suitable for spraying thin materials such as stains, lacquers, and fine finish paints.
• Spray Technique: Maintain a consistent distance and speed while spraying to ensure an even coat. The wider spray fan allows for fewer passes, potentially increasing productivity.
• Reversible Feature: If the tip becomes clogged during operation, rotate the tip 180 degrees to the "unclog" position, spray briefly to clear the obstruction, then rotate it back to the "spray" position. Always point the gun away from yourself and others when clearing clogs.

5. Maintenance and Cleaning

Regular cleaning and maintenance extend the life of your RAC X Reversible Tip.

1. Depressurize System: Always depressurize the airless spray system before performing any maintenance.
2. Remove Tip: Remove the spray gun guard and then carefully remove the FFT210 tip.
3. Clean Thoroughly: Clean the tip and the OneSeal immediately after each use with an appropriate cleaning solution (water for latex paints, mineral spirits for oil-based paints). Use a soft brush to remove paint residue.
4. Inspect for Wear: Regularly inspect the tip orifice for wear. A worn tip will produce a poor spray pattern and reduce efficiency. Replace worn tips promptly.
5. Storage: Store the clean tip in a tip saver fluid or submerged in an appropriate solvent to prevent drying and clogging.

6. Troubleshooting

Common issues and their solutions for the Graco FFT210 RAC X Reversible Tip.

• Poor Spray Pattern / Streaking:
  • Cause: Clogged tip orifice or worn tip.
  • Solution: Reverse the tip to clear clogs. If the problem persists, clean the tip thoroughly. If the tip is worn, replace it.
• Tip Not Fitting Guard:
  • Cause: Incompatible spray gun guard or incorrect tip series.
  • Solution: Ensure you are using a Graco RAC X guard, which is specifically designed for this tip series. Verify compatibility with your spray gun model.
• Paint Leaking Around Tip:
  • Cause: Damaged or improperly seated OneSeal, or loose guard.
  • Solution: Inspect the OneSeal for damage and ensure it is correctly seated. Tighten the spray gun guard securely.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or to purchase replacement parts, please contact Graco customer service or visit the official Graco website. Specific warranty terms may vary by region and product.

You can find more information and support at the Graco Store on Amazon.