Brondell Swash 300 Elongated Advanced Bidet Toilet Seat User Manual

Introduction

The Brondell Swash 300 Elongated Advanced Bidet Toilet Seat provides a cleansing, soothing, and hygienic wash experience. This manual outlines the installation, operation, maintenance, and troubleshooting for your bidet seat, ensuring optimal performance and longevity.

Key features include:

• Posterior and feminine warm water washes
• Dual retractable self-cleaning nozzles
• Ergonomic gentle-closing heated seat with quick release
• Wireless remote control
• Automatic power saving Eco Mode

Setup and Installation

For detailed installation instructions, please refer to the official Installation Manual (PDF) provided with your product or available online. A general overview of the installation process is provided below:

1. Turn off the water supply to your toilet and flush to empty the tank.
2. Remove your existing toilet seat.
3. Install the mounting bracket for the bidet seat onto the toilet bowl.
4. Connect the T-valve to the toilet's fill valve and the water supply line.
5. Connect the bidet seat's water hose to the T-valve.
6. Slide the bidet seat onto the installed mounting bracket until it clicks into place.
7. Turn on the water supply and check for any leaks.
8. Plug the bidet seat into a grounded electrical outlet.

Operating Instructions

The Brondell Swash 300 is operated via its wireless remote control. Ensure the remote has fresh AAA batteries installed.

Remote Control Functions:

• Rear Wash: Activates the posterior wash function.
• Front Wash: Activates the feminine wash function.
• Stop: Halts any active wash cycle.
• Water Pressure: Adjusts the intensity of the water spray.
• Water Temperature: Controls the temperature of the wash water.
• Seat Temperature: Adjusts the temperature of the heated seat (3 settings).
• Eco Mode: Activates the power-saving mode to reduce energy consumption.

To use, simply select your desired wash function and adjust settings as needed. The dual nozzles will extend, spray, and then retract and self-clean after use.

Maintenance and Care

Regular cleaning and maintenance will ensure the longevity and hygienic operation of your Brondell Swash 300 bidet seat.

General Cleaning:

• Wipe the exterior surfaces of the bidet seat with a soft, damp cloth and a mild, non-abrasive cleaner.
• Avoid using harsh chemicals, abrasive cleaners, or brushes, as these can damage the finish.
• Ensure the bidet seat is unplugged before cleaning the electrical components.

Nozzle Cleaning:

The nozzles are self-cleaning, extending and rinsing themselves before and after each use. For a more thorough manual cleaning:

• Refer to your user manual for specific instructions on how to manually extend the nozzles for cleaning.
• Gently wipe the nozzles with a soft cloth or toothbrush and mild soap.

Water Filter Maintenance:

The bidet seat includes a washable water filter. Depending on your water quality, it is recommended to clean this filter annually. This typically requires removing the unit from the toilet for access.

Troubleshooting

If you encounter issues with your Brondell Swash 300, try the following common troubleshooting steps:

• No Power/No Functions: Ensure the bidet seat is properly plugged into a working electrical outlet. Check the circuit breaker. Verify the remote control batteries are not depleted.
• No Water Spray/Weak Spray: Check that the water supply valve to the toilet is fully open. Ensure the water filter is not clogged and clean it if necessary.
• No Heated Water/Heated Seat: Confirm the water and seat temperature settings on the remote control are not set to 'off' or the lowest setting. Allow a few minutes for the water and seat to heat up.
• Remote Control Not Responding: Replace the AAA batteries in the remote control. Ensure there are no obstructions between the remote and the bidet seat's sensor.
• Leaks: Check all water connections for tightness. Ensure the rubber washers are properly seated. If leaks persist, turn off the water supply and contact customer support.

For more complex issues, consult the comprehensive User Manual (PDF) or contact Brondell customer support.

Specifications

Warranty and Support

The Brondell Swash 300 Elongated Advanced Bidet Toilet Seat comes with a 1 Year Limited Warranty. Please retain your proof of purchase for warranty claims.

For further assistance, including detailed user guides and installation manuals, please visit the official Brondell website or refer to the documents provided:

• User Manual (PDF)
• Installation Manual (PDF)
• Visit the Brondell Store on Amazon