1. Introduction
Thank you for purchasing the Edifier M3200 2.1 Multimedia Computer Speaker System. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new speaker system. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
2. Safety Instructions
- Power Source: Ensure the power supply voltage matches the voltage indicated on the speaker system.
- Ventilation: Do not block any ventilation openings. Maintain adequate space around the speakers for proper airflow.
- Water and Moisture: Do not expose the speakers to water, rain, or excessive moisture. Keep away from liquids.
- Heat Sources: Avoid placing the speakers near heat sources such as radiators, heat registers, stoves, or other heat-producing apparatus.
- Cleaning: Use a soft, dry cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.
- Servicing: Do not attempt to service the product yourself. Refer all servicing to qualified service personnel.
- Placement: Place the speakers on a stable, flat surface to prevent accidental falls.
3. Package Contents
Upon opening the package, please verify that all the following items are included:
- Edifier M3200 Subwoofer
- Two Satellite Speakers
- Wired Remote Controller
- Audio Input Cables (3.5mm to 3.5mm, RCA to 3.5mm)
- User Manual (this document)
4. Product Overview
The Edifier M3200 system consists of a powerful subwoofer, two elegantly designed satellite speakers, and a convenient wired remote controller.
Figure 4.1: Complete Edifier M3200 2.1 Speaker System. This image displays the central subwoofer unit, two tall, slender satellite speakers, and the compact wired remote control, all in a sleek black finish with blue accents.
4.1 Subwoofer
The wooden enclosed subwoofer houses a 5 1/2 inch (140mm) magnetically shielded driver, providing deep and rich bass. It also serves as the central hub for all connections.
Figure 4.2: Side view of the Edifier M3200 subwoofer, highlighting its robust wooden enclosure and the bass reflex port.
4.2 Satellite Speakers
The two satellite speakers are elegantly designed and magnetically shielded 2-way units. Each satellite contains a midrange unit (2 inch x 3 1/2 inch / 50mm x 90mm) and a treble unit (¾ inch / 20mm PV domed tweeter), delivering clear highs and balanced mids.
Figure 4.3: Close-up view of an Edifier M3200 satellite speaker, showcasing its sleek design and the speaker drivers.
4.3 Wired Remote Controller
The wired rotary master volume controller features a distinctive "red-halo" glowing effect. It includes an on/off feature, a headphone jack for private listening, and a 3.5mm auxiliary input for connecting additional audio devices.
Figure 4.4: The wired remote controller for the Edifier M3200, showing the large volume knob, headphone jack, and auxiliary input.
5. Setup
Follow these steps to set up your Edifier M3200 speaker system:
- Placement: Place the subwoofer on the floor or a sturdy surface near your computer or audio source. Position the satellite speakers on either side of your monitor or listening area, ensuring they are equidistant for optimal stereo imaging.
- Connect Satellite Speakers: Connect each satellite speaker to the corresponding output ports on the back of the subwoofer using the integrated RCA cables.
- Connect Audio Source: Connect your audio source (PC, laptop, CD player, etc.) to the subwoofer using the provided 3.5mm to 3.5mm audio cable or RCA to 3.5mm cable. The main audio input is typically on the back of the subwoofer.
- Connect Wired Remote: Plug the wired remote controller cable into the designated port on the subwoofer.
- Connect Power: Plug the power cord from the subwoofer into a wall outlet.
Figure 5.1: The Edifier M3200 speaker system set up with a computer monitor, illustrating typical desktop placement and connections.
Figure 5.2: An example of the Edifier M3200 speaker system integrated into a home office or study desk environment.
6. Operating Instructions
6.1 Power On/Off
To power on the system, rotate the master volume knob on the wired remote controller clockwise until you hear a click and the red-halo light illuminates. To power off, rotate the knob counter-clockwise until it clicks and the light turns off.
6.2 Volume Control
Adjust the overall system volume by rotating the large knob on the wired remote controller. Rotate clockwise to increase volume and counter-clockwise to decrease it.
6.3 Bass Control
The subwoofer features a dedicated bass control knob located on its rear panel. Adjust this knob to fine-tune the bass level to your preference.
6.4 Headphone Jack
A 3.5mm headphone jack is located on the wired remote controller. Plugging in headphones will automatically mute the speakers, allowing for private listening.
6.5 Auxiliary Input
The wired remote controller also includes a 3.5mm auxiliary input. This allows you to quickly connect portable audio devices like smartphones or MP3 players without needing to access the main input on the subwoofer.
7. Maintenance
Proper maintenance ensures the longevity and performance of your Edifier M3200 speaker system:
- Cleaning: Regularly wipe the speaker surfaces with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents.
- Dust: Use a soft brush or a vacuum cleaner with a brush attachment to gently remove dust from speaker grilles and ports.
- Ventilation: Ensure the subwoofer's ventilation openings remain clear and unobstructed to prevent overheating.
- Cables: Periodically check all cables for any signs of damage or fraying. Replace damaged cables immediately.
- Storage: If storing the speakers for an extended period, disconnect them from power and store them in a cool, dry place, preferably in their original packaging.
8. Troubleshooting
If you encounter issues with your Edifier M3200 speaker system, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound | Power not connected or turned on Audio cable not connected properly Volume too low Incorrect audio source selected on device | Ensure power cord is securely plugged in and the system is powered on. Check all audio cable connections between the source, remote, and subwoofer. Increase the master volume on the remote controller. Verify your computer or audio device's output settings. |
| Distorted sound | Volume too high Audio source distortion Damaged cable | Reduce the master volume. Check the audio quality from your source device. Inspect audio cables for damage and replace if necessary. |
| No bass | Subwoofer bass knob too low Subwoofer not powered on (if separate) Incorrect audio settings on source | Adjust the bass control knob on the back of the subwoofer. Ensure the subwoofer is receiving power. Check your audio device's equalizer or sound settings. |
| One satellite speaker not working | Loose connection Damaged satellite cable | Check the RCA connection for the affected satellite speaker at the subwoofer. Inspect the satellite speaker cable for damage. |
If the problem persists after trying these solutions, please contact Edifier customer support for further assistance.
9. Specifications
Detailed technical specifications for the Edifier M3200 speaker system:
| Feature | Specification |
|---|---|
| Speaker Type | 2.1 channel multimedia speaker system |
| Total Power Output | 34 Watts (RMS) |
| Subwoofer Driver | 5 1/2 inch (140mm), magnetically shielded |
| Midrange Unit | 2 inch x 3 1/2 inch (50mm x 90mm), magnetically shielded |
| Treble Unit | ¾ inch (20mm) PV domed, magnetically shielded |
| Impedance | 4 Ohm |
| Signal-to-Noise Ratio | ≥85 dB |
| Connectivity | 3.5mm Auxiliary Input, PC Input, CD Input |
| Color | Black |
| Product Dimensions (Subwoofer) | 10.5"D x 10"W x 16"H |
| Item Weight | 11.7 Pounds |
Figure 9.1: Dimensions of the Edifier M3200 subwoofer, showing its approximate depth, width, and height.
10. Warranty and Support
The Edifier M3200 speaker system comes with a limited warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Edifier customer service through their official website or the contact information provided with your purchase documentation.