Hailo Big Box 3715-10 Pivoting Waste Bin - 15 L

Introduction

The Hailo Big Box 3715-10 is a high-quality 15-liter pivoting waste bin designed for seamless integration into your kitchen or utility cabinet. Crafted from durable stainless steel with a RAL 8019 grey-brown lid, this bin offers a practical and hygienic waste disposal solution. Its innovative pivoting mechanism allows the lid to open automatically when the cabinet door is opened, providing convenient access.

Image: The Hailo Big Box 3715-10 pivoting waste bin, showcasing its stainless steel body and grey-brown lid.

Safety Information

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in injury or damage to the product.

• Ensure all components are securely fastened during installation to prevent the bin from falling.
• Keep small children away from the installation area during assembly.
• Do not overload the waste bin beyond its 15-liter capacity.
• Avoid placing hot materials or liquids directly into the bin.
• Use appropriate tools for installation as specified in the instructions.

Package Contents

Verify that all the following components are present in your package:

• 1x Stainless Steel Waste Bin (15 L capacity)
• 1x RAL 8019 Grey-Brown Lid
• 1x Pivoting Mechanism Assembly
• 1x Mounting Hardware Kit (screws, washers, etc.)
• 1x Installation Template (if applicable)

Setup and Installation

The Hailo Big Box 3715-10 is designed for installation in hinged door cabinets with a minimum width of 40 cm. The pivoting mechanism ensures the lid opens automatically when the cabinet door is opened.

Required Tools:

• Drill
• Screwdriver (Phillips head recommended)
• Measuring Tape
• Pencil
• Level

Installation Steps:

1. Prepare Cabinet: Ensure the cabinet interior is clean and free of obstructions. The bin requires a minimum cabinet width of 40 cm.
2. Position Template: Use the provided installation template (if included) to mark the drilling points on the inside of your cabinet door and the cabinet side wall. If no template is provided, carefully measure and mark according to the dimensions diagram.
3. Drill Pilot Holes: Drill pilot holes at the marked positions. Ensure the drill bit size matches the recommended size for the mounting screws.
4. Attach Pivoting Mechanism: Securely attach the pivoting mechanism assembly to the marked points on the cabinet door and side wall using the provided mounting hardware. Ensure it is level and firmly attached.
5. Insert Waste Bin: Place the stainless steel waste bin into the assembled pivoting mechanism. Ensure it sits correctly and is stable.
6. Attach Lid: Place the RAL 8019 grey-brown lid onto the waste bin. The lid is designed to interact with the pivoting arm.
7. Test Operation: Slowly open and close the cabinet door to ensure the bin pivots smoothly and the lid opens and closes correctly. Adjust mounting if necessary. The system is designed to work even with soft-close hinges up to 10 Newton.

Image: The Hailo Big Box 3715-10 installed inside a cabinet, showing the lid automatically opening as the cabinet door is opened.

Image: The waste bin in an installed state, demonstrating its use for disposing of items like pizza boxes.

Image: Diagram illustrating the "Swing Drehtüre" (Swing Hinged Door) installation variant, indicating suitability for hinged cabinet doors.

Image: Technical drawing showing the precise dimensions of the Hailo Big Box 3715-10, including height, width, and depth for installation planning.

Operating Instructions

Using your Hailo Big Box 3715-10 is straightforward:

1. Opening: Simply open your cabinet door. The integrated pivoting mechanism will automatically lift the lid of the waste bin, providing easy access for waste disposal.
2. Disposing Waste: Place your waste into the 15-liter stainless steel bin.
3. Closing: Close the cabinet door. The lid will automatically lower and seal the bin, containing odors and keeping your kitchen tidy.

Maintenance

Regular cleaning and maintenance will ensure the longevity and hygienic operation of your Hailo waste bin.

• Cleaning the Bin: The stainless steel inner bin can be easily removed for cleaning. Wash with warm soapy water and a soft cloth. Rinse thoroughly and dry completely before reinserting.
• Cleaning the Lid and Mechanism: Wipe the lid and the pivoting mechanism with a damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Regular Inspection: Periodically check all mounting screws and connections to ensure they remain tight. Tighten if necessary.
• Odor Control: For best odor control, use appropriate waste bags and empty the bin regularly.

Troubleshooting

If you encounter any issues with your Hailo Big Box 3715-10, refer to the following common problems and solutions:

Specifications

Warranty and Support

Specific warranty information for the Hailo Big Box 3715-10 is not available in the provided product data. For detailed warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Hailo website.

For technical support, spare parts, or further assistance, please contact Hailo customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's website.

Image: The Hailo brand logo, representing the manufacturer of this product.