Introduction
Thank you for choosing the Farberware FCP412 1000 Watt 12-Cup Percolator. This stainless steel percolator is designed to brew rich, flavorful coffee efficiently. Its durable construction and automatic keep-warm feature make it a reliable addition to any kitchen. Please read this manual thoroughly before first use to ensure proper operation and maintenance.

Image: The Farberware FCP412 12-Cup Percolator, a sleek stainless steel coffee maker with a black handle and base.
Product Overview
The Farberware FCP412 percolator consists of several key components:
- Percolator Pot: The main stainless steel body that holds water and brewed coffee.
- Percolator Stem (Pump Tube): A vertical tube that extends from the base to the coffee basket, through which hot water is pumped.
- Coffee Basket: A perforated basket that holds the coffee grounds, positioned at the top of the percolator stem.
- Basket Lid/Spreader: Sits on top of the coffee basket to evenly distribute water over the grounds.
- Lid: Covers the top of the percolator pot.
- Power Cord: Detachable cord for connecting the percolator to an electrical outlet.
Setup
- Unpack: Carefully remove all components from the packaging.
- Initial Cleaning: Before first use, wash the percolator pot, stem, coffee basket, and lid in warm, soapy water. Rinse thoroughly and dry completely.
- Placement: Place the percolator on a flat, stable, heat-resistant surface away from the edge of the counter. Ensure the power cord can reach an outlet without being stretched.
Operating Instructions
- Add Water: Remove the lid, coffee basket, and percolator stem. Fill the percolator pot with cold, fresh water to the desired level. The FCP412 can brew up to 12 cups.
- Assemble Internal Components: Place the percolator stem into the center well at the bottom of the pot. Ensure it is seated firmly.
- Add Coffee Grounds: Place the coffee basket onto the percolator stem. Add your desired amount of coarse-ground coffee to the basket. For a full 12 cups, approximately 12-16 tablespoons (or 1 cup) of coffee grounds are recommended, adjusted to taste. Do not overfill the basket.
- Secure Lid: Place the basket lid/spreader on top of the coffee grounds in the basket, then securely place the main lid onto the percolator pot.
- Connect Power: Attach the detachable power cord to the percolator's base and then plug the other end into a standard 120V AC electrical outlet.
- Brewing: The percolator will automatically begin the brewing cycle. Water will heat and be pumped up the stem, showering over the coffee grounds. The brewing process typically takes 10-15 minutes, depending on the amount of coffee.
- Keep Warm: Once brewing is complete, the percolator will automatically switch to a "keep warm" setting, maintaining the coffee at an optimal serving temperature.
- Serve: Unplug the percolator from the wall outlet before serving. Carefully pour coffee from the spout.
Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your percolator.
- Daily Cleaning: After each use, unplug the percolator and allow it to cool completely. Discard used coffee grounds. Wash the coffee basket, percolator stem, basket lid, and main lid in warm, soapy water. Rinse thoroughly. Wipe the interior and exterior of the percolator pot with a damp cloth. Do not immerse the electrical base of the percolator in water.
- Deep Cleaning (Monthly): To remove mineral deposits and coffee oils, fill the percolator with water and add 2 tablespoons of white vinegar or a descaling solution. Run a brewing cycle without coffee grounds. After the cycle, discard the solution and rinse the percolator thoroughly several times with fresh water.
- Storage: Ensure all parts are completely dry before storing. Store the percolator in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Coffee is too weak | Not enough coffee grounds; grounds too fine; insufficient brewing time. | Increase coffee grounds; use coarse-ground coffee; ensure proper water level. |
| Coffee is too strong | Too many coffee grounds; grounds too coarse; over-percolating. | Reduce coffee grounds; use slightly finer grounds; ensure proper water level. |
| Coffee grounds in coffee | Grounds too fine; basket overfilled; basket not seated properly. | Use coarse-ground coffee; do not overfill basket; ensure basket is correctly placed on stem. |
| Percolator not brewing | Not plugged in; power outage; internal components not assembled correctly. | Check power connection; verify outlet; reassemble stem and basket. |
Specifications
- Brand: Farberware
- Model: FCP412
- Capacity: 12-Cup
- Power: 1000 Watt
- Material: Stainless Steel
- Special Feature: Automatic Keep Warm
- Filter Type: Reusable
- Voltage: 120 Volts
- Dimensions (LxWxH): 8 x 8 x 14 inches
Warranty and Support
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Farberware website. Keep your purchase receipt as proof of purchase for any warranty claims.
For additional assistance, you may contact Farberware customer service through their official channels. Always ensure you are using official support resources for accurate information.







