Viper 7351V 2-Way Replacement Remote User Manual

1. Introduction

This manual provides comprehensive instructions for the proper use, setup, and maintenance of your Viper 7351V 2-Way Replacement Remote. Please read this manual thoroughly before operating your remote to ensure optimal performance and to understand all its features. This remote is designed to work with compatible Viper security and remote start systems, such as the Viper 3303V.

2. Product Overview

The Viper 7351V is a 5-button, 2-way replacement remote control featuring a large LCD display. It provides visual, audible, and vibratory feedback to confirm commands and monitor your vehicle's status from up to 2,000 feet away.

2.1 Key Features

• 5-Button Control: Dedicated buttons for common functions.
• Large LCD Display: Clear text labels and priority icons for easy vehicle status monitoring.
• 2-Way Communication: Receives confirmation of commands via audible tone, vibration, or visual alert.
• Extended Range: Operates effectively up to 2,000 feet.
• Remote Vehicle Control: Lock, unlock, and remote start your vehicle.

2.2 Remote Control Components

Figure 1: Viper 7351V 2-Way Replacement Remote in its retail packaging. The image illustrates the remote's compact size, approximately 8.3 inches (21 cm) in length, held within a hand for scale. The remote itself is visible through the clear plastic packaging.

The Viper 7351V remote includes the main remote unit and requires one AAA alkaline battery for operation (typically included).

3. Setup

3.1 Battery Installation

1. Locate the battery compartment cover on the back of the remote.
2. Carefully slide or unclip the cover to open the compartment.
3. Insert one AAA alkaline battery, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Replace the battery compartment cover, ensuring it is securely closed.

Note: Always use fresh alkaline AAA batteries for optimal performance. Dispose of used batteries responsibly.

3.2 Programming the Remote

The Viper 7351V remote must be programmed to your vehicle's compatible Viper security or remote start system (e.g., Viper 3303V) before it can be used. Programming procedures vary depending on the specific system and vehicle. It is highly recommended to have the remote programmed by an authorized Viper dealer or a qualified professional installer to ensure correct functionality and avoid potential issues. Refer to your vehicle's Viper system installation manual for detailed programming instructions, or contact your installer.

4. Operating Instructions

The Viper 7351V remote features five primary buttons for controlling your vehicle's security and remote start functions. The LCD display provides visual feedback on the system's status.

4.1 Button Functions

Note: Specific functions for AUX and Function/Menu buttons may vary based on your Viper system's configuration. Refer to your main system's user guide for detailed information.

4.2 LCD Display and Icons

The LCD display provides real-time status updates and command confirmations. Priority icons indicate important vehicle conditions such as door open, trunk open, alarm triggered, or remote start status. Consult your main Viper system manual for a complete list and explanation of all LCD icons.

4.3 2-Way Communication Feedback

Upon successful command execution or a change in vehicle status, the 7351V remote provides feedback through:

• Audible Tones: Distinct beeps confirm actions.
• Vibration: A tactile alert for discreet confirmation.
• Visual Alerts: Icons and text on the LCD display update to show current status.

5. Maintenance

5.1 Battery Replacement

When the battery icon on the LCD display indicates low power, or if the remote's range and responsiveness decrease, it's time to replace the AAA battery. Follow the steps outlined in Section 3.1 Battery Installation.

Caution: Do not attempt to recharge non-rechargeable batteries. Do not mix old and new batteries, or different types of batteries.

5.2 Cleaning

To clean your remote, gently wipe the surface with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the remote's finish or internal components.

6. Troubleshooting

If you experience issues with your Viper 7351V remote, try the following troubleshooting steps:

• Remote Not Responding:
  • Check the battery: Replace the AAA battery if it is low or depleted.
  • Ensure you are within range: The remote has a maximum range of 2,000 feet, but environmental factors can reduce this.
  • Verify programming: Confirm the remote is correctly programmed to your Viper system. Re-programming may be necessary.
• LCD Display Blank or Dim:
  • Replace the battery.
  • Ensure the remote has not been exposed to extreme temperatures or physical damage.
• Inconsistent Range:
  • Replace the battery.
  • Avoid operating the remote near large metal objects or strong radio interference sources.
  • Ensure the vehicle's antenna is properly installed and unobstructed.

If these steps do not resolve the issue, contact an authorized Viper dealer or professional installer for assistance.

7. Specifications

8. Warranty and Support

Warranty information for the Viper 7351V 2-Way Replacement Remote is typically provided with the original Viper security or remote start system. Please refer to the documentation that came with your primary system for details regarding warranty coverage and terms.

For technical support, programming assistance, or service, please contact your authorized Viper dealer or the professional installer who installed your Viper system. You can also visit the official Viper website for additional resources and contact information.

Viper Official Website: www.viper.com