AVerMedia EZMaker 7 USB Video Capture Card User Manual

1. Introduction

The AVerMedia DVD EZMaker 7 is designed to convert analog video signals from sources like VHS tapes into digital formats. This device allows users to preserve old home movies and other analog content by digitizing them for playback on modern devices or for sharing. Its compact USB interface ensures portability and ease of connection to both desktop and notebook computers.

2. What's in the Box

• C039 AVerMedia DVD EZMaker 7 Unit
• USB Cable
• Quick Installation Guide

Figure 2.1: Contents of the AVerMedia EZMaker 7 package, including the capture device, USB cable, and quick guide.

3. System Requirements

To ensure optimal performance, your computer system should meet the following minimum requirements:

• Operating System: Windows 10 / Windows 8.1 / Windows 7 / Windows Vista / Windows XP. Mac OS X 10.8 or later.
• Processor (for basic DVD authoring): Intel Pentium 4 2.4 GHz / AMD Athlon XP 2400+ / Intel Pentium M 2.0 GHz.
• Processor (for HD authoring and direct DV/HDV recording): Intel Pentium 4 3.0 GHz / AMD Athlon XP 3000+ (Windows). Intel Core 2 Duo 2.0 GHz (Mac).
• Note: This product does not support Mac OS 10.13 and later versions.

4. Setup and Connection

Follow these steps to connect your AVerMedia EZMaker 7:

1. Install Drivers: Before connecting the device, install the necessary drivers from the included software CD or download the latest drivers from the official AVerMedia website.
2. Connect Analog Source: Connect your analog video source (e.g., VCR, camcorder, DVD player) to the AVerMedia EZMaker 7 using the appropriate RCA Composite (yellow for video, white/red for audio) or S-Video cables. Ensure all connections are secure.
3. Connect to Computer: Plug the USB cable from the AVerMedia EZMaker 7 into an available USB 2.0 port on your desktop or notebook computer.

Figure 4.1: Connection diagram for the AVerMedia EZMaker 7, illustrating how to connect analog devices and a computer.

Figure 4.2: The AVerMedia EZMaker 7 device, showing its compact design and various input ports.

Figure 4.3: The AVerMedia EZMaker 7 with its USB connector exposed, ready for connection to a computer.

5. Operating Instructions

The AVerMedia EZMaker 7 is designed for straightforward operation to digitize your analog media.

5.1. Video Capture

• The device captures analog signals to digitize VHS tapes to DVD/VCD formats.
• It supports multiple media formats and various A/V devices.
• Use the bundled CyberLink PowerDirector 14 & PowerProducer 5 DVD software for capturing.

5.2. Editing and Organization

• The CyberLink software allows you to edit, organize, and highlight video clips on a Storyboard.
• You can create personal menus for your DVDs or VCDs.
• For the latest key code for PowerDirector, please contact AVerMedia Tech support.

6. Maintenance

To ensure the longevity and proper functioning of your AVerMedia EZMaker 7, follow these general maintenance guidelines:

• Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the device to extreme temperatures or humidity.
• Store the device in a safe place when not in use to prevent physical damage.
• Ensure the USB cable and analog cables are not bent or crimped, as this can damage the internal wiring.

7. Troubleshooting

If you encounter issues with your AVerMedia EZMaker 7, consider the following troubleshooting steps:

• No Video/Audio Signal:
  • Verify all cables (RCA, S-Video, USB) are securely connected to both the EZMaker 7 and your source device/computer.
  • Ensure your analog source device (VCR, camcorder) is powered on and playing content.
  • Check your capture software settings to ensure the correct input source (Composite or S-Video) is selected.
• Software Not Recognizing Device:
  • Reinstall the device drivers from the AVerMedia website to ensure you have the latest version.
  • Try connecting the EZMaker 7 to a different USB port on your computer.
  • Restart your computer after driver installation or re-connection.
  • Confirm your operating system meets the system requirements, especially for Mac OS (not supported on 10.13 and later).
• Poor Video Quality:
  • Ensure your source video quality is good. The EZMaker 7 digitizes the existing analog signal.
  • Check for any loose connections that might cause signal degradation.
  • Verify your computer meets the recommended system requirements for video processing.

8. Specifications

9. Warranty and Support

For technical assistance, warranty information, or to obtain the latest key code for the bundled CyberLink PowerDirector software, please contact AVerMedia Tech support directly.

• Official User Guides: Additional user guides and manuals in PDF format may be available for download.
• Visit the AVerMedia Store on Amazon for more product information and support resources.