Leviton 40834-W

Leviton QuickPort HDMI Feed-Through Connector 40834-W User Manual

Brand: Leviton | Model: 40834-W

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of the Leviton QuickPort HDMI Feed-Through Connector, model 40834-W. This connector is designed to provide a clean and efficient solution for integrating HDMI connections into QuickPort wall plates and housings, facilitating in-wall wiring for high-definition audio and video signals.

Leviton QuickPort HDMI Feed-Through Connector, front-side view

Image 1: Leviton QuickPort HDMI Feed-Through Connector (Model 40834-W). This image displays the white connector from a front-side angle, highlighting its compact design and the HDMI port.

2. Product Features

The Leviton QuickPort HDMI Feed-Through Connector offers several key features:

3. Setup and Installation

Follow these steps to install your Leviton QuickPort HDMI Feed-Through Connector:

  1. Prepare the Wall Plate: Ensure you have a compatible Leviton QuickPort wall plate or housing with an available port.
  2. Insert the Connector: Align the QuickPort HDMI connector with an open port on the wall plate. Gently push the connector into the port until it snaps securely into place. You should hear a click, indicating it is properly seated.
  3. Connect HDMI Cables:
    • Connect one end of an HDMI cable from your source device (e.g., Blu-ray player, gaming console, computer) to the rear female HDMI port of the installed QuickPort connector.
    • Connect the other end of an HDMI cable from your display device (e.g., HDTV, projector) to the front female HDMI port of the installed QuickPort connector.
  4. Secure Connections: Ensure all HDMI cables are firmly seated in their respective ports to prevent signal loss.
Leviton QuickPort HDMI Feed-Through Connector, front view

Image 2: Front view of the Leviton QuickPort HDMI Feed-Through Connector. This image clearly shows the female HDMI port where an HDMI cable is connected.

4. Operating Instructions

Once the Leviton QuickPort HDMI Feed-Through Connector is installed and connected, operation is straightforward:

5. Maintenance

To ensure the longevity and optimal performance of your Leviton QuickPort HDMI Feed-Through Connector:

6. Troubleshooting

If you encounter issues with your HDMI connection, consider the following troubleshooting steps:

ProblemPossible CauseSolution
No video or audio signal
  • Loose HDMI cable connections.
  • Incorrect input selected on display.
  • Faulty HDMI cable.
  • Source or display device not powered on.
  • Ensure all HDMI cables are firmly seated in the connector and devices.
  • Verify the correct HDMI input is selected on your TV or projector.
  • Test with a different, known-good HDMI cable.
  • Confirm all devices are powered on.
Intermittent signal or flickering screen
  • Loose connections.
  • Long or low-quality HDMI cables.
  • Compatibility issues with high-bandwidth signals (e.g., 4K HDR, eARC).
  • Check and secure all HDMI connections.
  • Use high-quality, certified HDMI cables, especially for 4K or longer runs.
  • If experiencing issues with 4K HDR or eARC, particularly with multiple keystones or specific sensitive devices (e.g., some gaming consoles), try testing with a single keystone or a direct cable connection to isolate the problem. Some setups may require direct connections for maximum bandwidth.
Poor picture quality
  • Low-quality HDMI cable.
  • Source device output settings.
  • Replace HDMI cables with higher quality, shielded versions.
  • Check the video output settings on your source device.

7. Specifications

AttributeDetail
BrandLeviton
Model Number40834-002-00W
Connector TypeHDMI Feed-Through
Connector GenderFemale-to-Female
MaterialABS Plastic
ColorWhite
Contact FinishGold Plated
ApplicationHigh-Definition Media Center
Product Dimensions4 x 6 x 0.63 inches
Item Weight0.32 ounces

8. Warranty and Support

For specific warranty information regarding your Leviton QuickPort HDMI Feed-Through Connector, please refer to the documentation included with your purchase or visit the official Leviton website. Leviton provides customer support for product inquiries, technical assistance, and warranty claims.

You can typically find support contact information on the manufacturer's website:

Visit Leviton Support

Related Documents - 40834-W

Preview Leviton eXtreme Cat 6 and Cat 5e QuickPort Jacks Installation Guide
This guide provides installation instructions for Leviton eXtreme Cat 6 and Cat 5e QuickPort Jacks, including wiring methods and safety information.
Preview Leviton Renoir II Architectural Wall Box Dimmers - Product Data
Detailed product data for Leviton Renoir II Architectural Wall Box Dimmers, including features, specifications, supported load types, dimensions, and ordering information for various incandescent, low voltage, fluorescent, and fan speed control applications.
Preview Leviton QuickPort Flush Mount Wallplates Installation and Safety Guide
Official installation and safety instructions for Leviton QuickPort Flush Mount Wallplates. Learn how to install, configure, and safely use these versatile wallplates for network and communication applications.
Preview My Leviton App Guide: Control Your Smart Home Devices
Explore the My Leviton App Guide to easily enroll, integrate, and customize your Decora Smart Wi-Fi devices and Leviton Load Center with Smart Breakers for seamless smart home control.
Preview My Leviton App Guide: Smart Home Control for Decora Smart Wi-Fi and Load Centers
A comprehensive guide to using the My Leviton app for managing Leviton Decora Smart Wi-Fi devices and Leviton Load Centers with Smart Breakers. Covers setup, schedules, activities, device settings, dashboard customization, energy monitoring, and customer support.
Preview Leviton Building Manager Online (BMO) Software Overview
Discover Leviton's Building Manager Online (BMO) software, a robust, cloud-based energy management solution for commercial buildings. Explore features like energy visualization, tenant billing, advanced reporting, and code compliance tools, designed to optimize energy usage and reduce operational costs.