Taymor Prisma Series 18-Inch Towel Bar (Model 02-D9218W) Instruction Manual

1. Product Overview

The Taymor Prisma Series 18-inch Towel Bar, model 02-D9218W, is designed to provide a functional and stylish solution for hanging towels in your bathroom. This towel bar features a crisp white powder-coated finish and a traditional design, complementing various bathroom decors. Constructed from durable Zamac (diecast zinc alloy), it ensures longevity and reliable performance. The unit measures 19 7/8 inches wide with a 3 1/8-inch extension from the mounting surface.

Key Features:

• Dimensions: 19-7/8 inches wide x 3-1/8 inches extension from the wall.
• Finish: Crisp white powder-coated finish for a clean, subtle look.
• Mounting: Concealed surface mount for a seamless appearance.
• Design: Traditional style that coordinates with the entire Prisma series.
• Material: Constructed from durable Zamac (diecast zinc alloy).

2. Package Contents

Please verify that all components are present before beginning installation.

• Taymor Prisma Series 18-Inch Towel Bar (1 unit)
• Mounting Hardware (screws, anchors, etc.)

3. Safety Information

Read all instructions carefully before installation. Failure to follow these instructions may result in injury or damage to the product or mounting surface.

• Always wear appropriate safety gear, such as safety glasses, during installation.
• Ensure the mounting surface is structurally sound and can support the weight of the towel bar and any items placed on it.
• Use the correct tools for drilling and fastening to prevent damage.
• Keep small parts and hardware out of reach of children.
• Do not overtighten screws, as this may strip threads or damage the product.

4. Setup and Installation

Follow these steps for proper installation of your Taymor Prisma Series Towel Bar.

Tools Required (Not Included):

• Pencil
• Measuring Tape
• Drill
• Drill Bits (appropriate for wall anchors)
• Screwdriver (Phillips head recommended)
• Level

Installation Steps:

1. Determine Mounting Location: Choose a suitable location on your wall for the towel bar. Ensure there are no electrical wires or plumbing pipes behind the drilling area.
2. Mark Drilling Points: The drilled holes for this towel bar are 17 7/8 inches center to center. Use a measuring tape and a level to mark two points on the wall that are 17 7/8 inches apart horizontally and at the desired height.
3. Drill Pilot Holes: Using a drill bit appropriate for your wall type and the provided wall anchors, drill pilot holes at the marked points.
4. Insert Wall Anchors: Gently tap the wall anchors into the pilot holes until they are flush with the wall surface.
5. Attach Mounting Brackets: Secure the mounting brackets (if separate from the towel bar base) to the wall using the provided screws, fastening them into the wall anchors.
6. Mount Towel Bar: Align the towel bar with the attached mounting brackets. Secure the towel bar to the brackets using the remaining screws, ensuring a snug and stable fit. The mounting is concealed for a clean look.
7. Verify Stability: Gently tug on the installed towel bar to ensure it is securely fastened to the wall.

Image: The Taymor Prisma Series 18-Inch Towel Bar, model 02-D9218W, shown in its white finish. This image illustrates the product's design and appearance when installed.

5. Usage

The Taymor Prisma Series Towel Bar is designed for hanging towels and other lightweight bathroom textiles. Ensure that the total weight placed on the towel bar does not exceed its structural capacity to prevent damage or detachment from the wall.

6. Maintenance

To maintain the appearance and longevity of your Taymor Prisma Series Towel Bar, follow these simple cleaning guidelines:

• Cleaning: Wipe the towel bar regularly with a soft, damp cloth.
• Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, or chemical solvents, as these can damage the white powder-coated finish.
• Drying: Dry the surface immediately after cleaning to prevent water spots.

7. Troubleshooting

If you encounter any issues with your towel bar, refer to the following common solutions:

• Towel Bar Feels Loose: If the towel bar becomes loose over time, gently tighten the mounting screws. Do not overtighten. If the wall anchors are damaged, they may need to be replaced or the towel bar repositioned.
• Scratches or Finish Damage: Minor scratches may be touched up with a compatible white enamel paint. For significant damage, consider contacting Taymor customer support for advice.

8. Specifications

9. Warranty Information

Taymor Industries warrants goods against defects in manufacture for one year from the date of purchase. This warranty does not cover user-caused damage or damage incurred during installation. The warranty is void if the goods have been subjected to misapplication or abuse.

10. Customer Support

For further assistance, technical support, or warranty claims, please contact Taymor Industries directly. Refer to the official Taymor website or product packaging for current contact information.