Introduction
Welcome to the user manual for the Lindy 4x2 HDMI 1.4 Switching Splitter, Model 38054. This device allows you to connect up to four HDMI or DVI source devices to two HDMI display devices, distributing signals simultaneously or switching between sources. Please read this manual thoroughly to ensure proper installation and operation.
Safety Information
Please observe the following safety guidelines to prevent damage to the unit and ensure user safety:
- Do not expose this unit to rain, moisture, or liquids.
- Do not attempt to open the unit casing. There are no user-serviceable parts inside.
- Use only the provided power adapter. Using an unauthorized adapter may damage the unit and void the warranty.
- Ensure proper ventilation around the unit. Do not block any ventilation openings.
- Disconnect power before cleaning. Clean the unit with a soft, dry cloth only.
Package Contents
Verify that your package contains the following items:
- Lindy 4x2 HDMI 1.4 Switching Splitter (Model 38054)
- Power Adapter
- Infrared Remote Control
- User Manual (this document)
Product Features
- Connects up to 4 HDMI/DVI source devices to 2 HDTV displays or projectors.
- Supports 1080p resolution and 3D video formats.
- Compatible with digital video formats in deep color mode (up to 36 bit).
- Supports lossless compressed digital audio formats, including Dolby TrueHD and DTS-HD Master Audio.
- Each selected input signal is simultaneously sent to both connected display devices.
- Includes an infrared remote control for convenient switching.
- Features signal re-timing, compensation, and regeneration for output signal transmission up to 10 meters.
Product Overview
The Lindy 4x2 HDMI 1.4 Switching Splitter is designed for efficient signal management in home theater or professional AV setups.
This image shows the front and top view of the Lindy 4x2 HDMI 1.4 Switching Splitter. The front panel typically features LED indicators for active inputs and outputs, along with buttons for manual switching. The rear panel, not fully visible, would contain the HDMI input and output ports, and the power input.
Front Panel
The front panel typically includes:
- Input Selection Buttons: For manually selecting the desired HDMI input source (e.g., Input 1, Input 2, etc.).
- LED Indicators: To show which input is currently active and which outputs are connected.
- IR Receiver: For receiving signals from the infrared remote control.
Rear Panel
The rear panel typically includes:
- HDMI Input Ports (x4): Connect your source devices (e.g., Blu-ray player, game console, PC).
- HDMI Output Ports (x2): Connect to your display devices (e.g., HDTV, projector).
- DC 5V Power Input: For connecting the provided power adapter.
Setup and Installation
Follow these steps to set up your Lindy 4x2 HDMI 1.4 Switching Splitter:
- Ensure all devices (source, display, and splitter) are powered off and unplugged from their power outlets.
- Connect your HDMI source devices (e.g., DVD player, game console, PC) to the HDMI Input ports (HDMI IN 1-4) on the rear of the splitter using high-quality HDMI cables.
- Connect your HDMI display devices (e.g., HDTV, projector) to the HDMI Output ports (HDMI OUT 1-2) on the rear of the splitter using high-quality HDMI cables.
- Connect the provided power adapter to the DC 5V Power Input on the splitter, then plug the adapter into a suitable power outlet.
- Power on your display devices, then your source devices, and finally the Lindy 4x2 HDMI 1.4 Switching Splitter.
- Select the desired input source using the buttons on the front panel or the infrared remote control.
Operating Instructions
Manual Switching
To switch between input sources manually, press the corresponding input selection button on the front panel of the splitter. The LED indicator for the active input will illuminate.
Remote Control Operation
Use the provided infrared remote control to select input sources. Point the remote control towards the IR receiver on the front panel of the splitter.
- Input 1-4 Buttons: Press the button corresponding to the desired HDMI input source (1, 2, 3, or 4).
- Power Button: (If available on your remote) To power the unit on or off.
The selected input will be displayed on both connected output devices simultaneously.
Maintenance
To ensure optimal performance and longevity of your Lindy 4x2 HDMI 1.4 Switching Splitter:
- Keep the unit in a cool, dry place, away from direct sunlight and heat sources.
- Clean the unit with a soft, dry cloth. Do not use liquid or aerosol cleaners, as they may damage the finish or internal components.
- Ensure proper ventilation and do not block any vents on the unit.
Troubleshooting
If you encounter issues with your Lindy 4x2 HDMI 1.4 Switching Splitter, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No picture or sound on display. | Loose cable connections, incorrect input selection, power issue, incompatible resolution. |
|
| Intermittent signal or flickering. | Poor quality HDMI cables, signal interference, long cable runs, HDCP issues. |
|
| Remote control not working. | Dead battery, obstructed IR path, remote too far. |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | 38054 |
| Brand | Lindy |
| Inputs | 4 x HDMI |
| Outputs | 2 x HDMI |
| HDMI Standard | HDMI 1.4 |
| Supported Resolutions | Up to 1080p |
| 3D Support | Yes |
| Deep Color | Up to 36 bit |
| Audio Support | Dolby TrueHD, DTS-HD Master Audio |
| Max Output Cable Length | 10m (32.8 ft) |
| Item Weight | 2.9 Pounds (1.32 kg) |
Warranty and Support
This Lindy product comes with a 2-year warranty from the date of purchase.
For technical support, troubleshooting assistance, or warranty claims, please contact your local Lindy customer service or visit the official Lindy website for further assistance. Please retain your proof of purchase for warranty validation.
