1. Product Overview
The Chemtronics ES1210 Electro-Wash PX is a fast-drying, one-step precision cleaning and degreasing agent. It is formulated to be safe for most plastics. Engineered with very low surface tension, this high-pressure aerosol formulation effectively flushes areas clean and evaporates instantly, leaving no residue. It is an extra-strength, general-purpose cleaner/degreaser.
Image 1: Front view of the Chemtronics ES1210 Electro-Wash PX aerosol can, showing the product name, brand, and key features like "Plastic Safe" and "Xtra Strength".
2. Safety Information and Precautions
DANGER! EXTREMELY FLAMMABLE.
Direct inhalation of spray may be harmful. Container may explode if heated. Read precautions on back panel before use.
- Flammable: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
- Pressurized Container: Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source.
- Eye Contact: Causes serious eye irritation. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention.
- Skin Contact: Wash hands thoroughly after handling. If skin irritation occurs, get medical advice/attention.
- Inhalation: Direct inhalation of spray may be harmful. Use only in a well-ventilated area. If inhaled, move person to fresh air and restore breathing. If breathing is difficult, give oxygen. Get medical attention immediately.
- Storage: Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Store in a well-ventilated place. Keep container tightly closed.
- Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations.
- Keep out of reach of children.
For industrial use only. Read Safety Data Sheets (SDS) prior to use. For SDS or technical data sheets, contact Chemtronics Technical Hot Line at 1-800-TECH-401 (1-800-832-4401) or visit their website at www.chemtronics.com.
Image 2: Back view of the Chemtronics ES1210 aerosol can, displaying detailed usage directions and critical safety warnings in multiple languages.
Image 3: Side view of the Chemtronics ES1210 aerosol can, providing further safety information, ingredient list, manufacturer contact details, and a barcode.
3. Setup and Preparation
- Ensure the work area is well-ventilated.
- Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, to prevent eye and skin contact.
- Identify the object to be cleaned. Ensure it is powered off and cooled down if applicable.
- Shake the can gently before use.
- Attach the extension tube to the nozzle for precision application, if required.
4. Operating Instructions
Follow these steps for effective cleaning and degreasing:
- Hold the object to be cleaned in a vertical position.
- Hold the aerosol can 4-6 inches (10-15 cm) from the surface of the object.
- Spray from top to bottom, allowing the liquid to flush away contaminants.
- For precision application or reaching confined areas, utilize the provided extension tube.
- Allow the product to evaporate completely. It is designed to evaporate instantly, leaving no residue.
Note: This product is safe on most plastics. Always test on an inconspicuous area first if unsure about material compatibility.
5. Storage and Maintenance
Proper storage ensures product longevity and safety:
- Store in a cool, dry, well-ventilated area.
- Keep away from direct sunlight and temperatures exceeding 50°C (122°F).
- Keep container tightly closed when not in use.
- Do not store near heat sources, sparks, or open flames.
No specific maintenance is required for the aerosol can itself.
6. Troubleshooting and First Aid
In case of accidental exposure or misuse, refer to the following:
- Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention immediately.
- Skin Contact: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Continue to rinse for at least 10 minutes. Get medical attention if irritation develops.
- Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.
- Ingestion: Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately.
- Fire: In case of fire, use dry chemical, CO2, water spray (fog), or foam. Do not use water jet.
For further assistance, consult the Safety Data Sheet (SDS) or contact emergency services.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | ES1210 |
| Brand | Chemtronics |
| Item Form | Liquid, Aerosol |
| Material Feature | Organic |
| Item Volume | 12.5 Fluid Ounces (354 g) |
| Package Dimensions | 9.21 x 1.65 x 1.57 inches |
| Manufacturer | ITW Chemtronics |
| Plastic Safe | Yes |
| Flammability | Extremely Flammable |
Image 4: A visual representation of the Chemtronics ES1210 aerosol can's size, indicating a height of approximately 10 inches (25 cm) when held by a hand.
8. Warranty Information
For specific warranty details regarding the Chemtronics ES1210 Electro-Wash PX, please refer to the official Chemtronics website or contact their customer support directly. Warranty terms and conditions may vary.
9. Support and Contact Information
For technical assistance, product inquiries, or safety data sheets, please contact Chemtronics:
- Technical Hot Line: 1-800-TECH-401 (1-800-832-4401)
- Website: www.chemtronics.com
- Address: Chemtronics, 8125 Cobb Center Dr., Kennesaw, Georgia USA 30152-4388
For 24-hour emergency support, call CHEMTREC at 1-800-424-9300 (or +1 703-527-3887 for collect calls).
