AKG 3347X00060
Contents
AKG WMS40 Wireless Mini Single Vocal Microphone Set
Instruction Manual
1. Product Overview
The AKG WMS40 Mini Single Vocal Set is a compact and user-friendly wireless microphone system designed for clear audio transmission. It is ideal for various applications including houses of worship, hotels, gyms, and band performances. This system provides a reliable plug-and-play solution for vocalists and presenters.
1.1. Key Features
- Crystal clear audio sound.
- HT40 Mini handheld transmitter with dynamic cardioid capsule.
- Extended battery life of up to 30 hours on a single AA battery.
- Ultra-compact receiver housing.
- 1/4" jack output on the receiver.
1.2. Package Contents
Upon unboxing, please ensure all the following components are present:
- 1 x SR40 Mini Receiver
- 1 x HT40 Mini Handheld Transmitter
- 1 x Universal Power Supply (with US/UK/EU adapters)
- 1 x AA Size Battery
Image: The AKG WMS40 Wireless Mini Single Vocal Microphone Set, showing the SR40 Mini Receiver and the HT40 Mini Handheld Transmitter.
2. Setup Guide
2.1. Receiver Placement
Place the SR40 Mini Receiver on a stable, flat surface, away from large metal objects or other wireless devices that may cause interference. Ensure the antenna has a clear line of sight to the intended area of use for the transmitter.
Image: The SR40 Mini Receiver and HT40 Mini Handheld Transmitter displayed separately, highlighting their individual forms.
2.2. Power Connection
- Connect the universal power supply to the DC 12V 300mA input on the rear of the SR40 Mini Receiver.
- Plug the power supply into a suitable electrical outlet.
- The "ON/OFF" indicator on the receiver should illuminate when powered on.
Image: Rear view of the AKG SR40 Mini Receiver, showing the DC power input and the 1/4" balanced audio output jack.
2.3. Audio Output Connection
Connect the 1/4" (6.35 mm) jack output from the SR40 Mini Receiver to the audio input of your mixer, amplifier, or karaoke machine. Ensure the volume on your audio device is set to a low level before proceeding.
2.4. Transmitter Battery Installation
- Unscrew the bottom part of the HT40 Mini Handheld Transmitter to reveal the battery compartment.
- Insert the supplied AA battery, observing the correct polarity (+/-) as indicated inside the compartment.
- Securely reattach the bottom part of the transmitter.
3. Operating Instructions
3.1. Powering On the System
- Turn on the SR40 Mini Receiver using the ON/OFF switch. The "ON/OFF" LED will illuminate green.
- Turn on the HT40 Mini Handheld Transmitter using its ON/OFF switch. The LED on the transmitter will illuminate.
- The "RF OK" LED on the receiver should illuminate green, indicating a successful wireless connection between the transmitter and receiver.
3.2. Adjusting Volume
Use the "VOLUME" knob on the SR40 Mini Receiver to adjust the output level of the microphone. Start with a low volume and gradually increase it to a comfortable listening level on your connected audio system.
3.3. Monitoring Audio Levels
The "AF CLIP" LED on the receiver indicates if the audio signal is too strong and clipping (distorting). If this LED frequently illuminates red, reduce the volume on the receiver or the input gain on your connected audio device to prevent distortion.
3.4. Powering Off the System
- Turn off the HT40 Mini Handheld Transmitter.
- Turn off the SR40 Mini Receiver.
- Disconnect the power supply from the receiver and the electrical outlet.
4. Maintenance
4.1. Cleaning
Wipe the surfaces of the receiver and transmitter with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the finish or internal components.
4.2. Battery Replacement
When the battery indicator on the HT40 Mini Handheld Transmitter shows low power, or if audio quality degrades, replace the AA battery promptly. Always use fresh, high-quality alkaline batteries for optimal performance and battery life.
4.3. Storage
Store the microphone set in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the battery from the transmitter to prevent leakage.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output. |
|
|
| Intermittent sound or static. |
|
|
| Distorted audio (AF CLIP LED red). |
|
|
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | 3347X00060 |
| Microphone Form Factor | Mini Handheld |
| Polar Pattern | Unidirectional (Cardioid) |
| Connectivity Technology | Wireless (Auxiliary) |
| Connector Type | 6.35 mm Jack (1/4") |
| Power Source | Battery Powered (Transmitter), AC Adapter (Receiver) |
| Transmitter Battery | 1 x AA battery (included) |
| Battery Life | Up to 30 hours (approx.) |
| Signal-to-Noise Ratio | 78 dB |
| Number of Channels | 1 (Fixed Frequency) |
| Item Weight | Approximately 2.31 pounds (total package) |
| Product Dimensions (L x W x H) | 10 x 7.9 x 2.3 inches |
| Color | Black |
| Manufacturer | AKG |
7. Warranty and Support
For warranty information and technical support, please refer to the official AKG website or contact AKG customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance, you may visit the AKG Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.