Intex Jump-O-Lene Inflatable Bounce House User Manual

Introduction

Thank you for choosing the Intex Jump-O-Lene Inflatable Bounce House. This product is designed to provide a safe and engaging play environment for children aged 3 to 6 years. Please read this manual thoroughly before setup and use to ensure proper operation and safety. Keep these instructions for future reference.

Safety Guidelines

WARNING: Failure to follow these instructions may result in serious injury or death.

Adult supervision is required at all times. Never leave children unattended while using the bounce house.
Recommended for children aged 3 to 6 years.
Maximum weight capacity: 120 pounds (54 kg). Designed for a maximum of 2 children simultaneously.
Ensure the bounce house is placed on a soft, level surface, free from sharp objects, rocks, or debris.
Maintain a clear perimeter around the bounce house, away from walls, fences, and other obstacles.
Do not allow children to wear shoes, glasses, or jewelry while playing to prevent injury and damage to the product.
Keep pets away from the bounce house.
Do not use during strong winds or adverse weather conditions.
This product is not self-inflating. An external air pump is required for inflation.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Package Contents

Verify that all components are present:

1 x Intex Jump-O-Lene Inflatable Bounce House

Setup Instructions

Choose a Location: Select a flat, clear area indoors or outdoors. Ensure there are no sharp objects, uneven surfaces, or obstructions nearby.
Unfold the Bounce House: Carefully remove the bounce house from its packaging and unfold it completely on the chosen surface.
Inflate the Bounce House: Locate the inflation valves. This model requires an external air pump (not included). Use a pump with appropriate nozzles for the different valve sizes. Inflate each section until it is firm to the touch but not over-inflated.

Video: Official Intex demonstration of the Inflatable Playhouse Jump-O-Lene, showing inflation and children playing. This video illustrates the product's features and setup process.

Image: The Intex Jump-O-Lene Inflatable Bounce House fully inflated and ready for use. It features red, yellow, and blue sections with mesh walls.

Two children jumping inside the Intex Jump-O-Lene bounce house — Image: Two children actively jumping and playing inside the Intex Jump-O-Lene bounce house, demonstrating its use for physical activity.

Operating Instructions

Once fully inflated and secured, the Jump-O-Lene bounce house is ready for play.

Ensure children enter and exit through the designated crawl-thru door.
Remind children to avoid rough play, flips, or climbing on the walls.
The soft double-mattress floor is designed for stability and prevents tipping during active play.
The high curtain walls and reinforced net provide a secure play area.

Child crawling through the door of the Intex Jump-O-Lene bounce house — Image: A child crawling through the built-in door of the Intex Jump-O-Lene, highlighting the crawl-thru feature for imaginative play.

Maintenance and Storage

Cleaning: Clean the bounce house with mild soap and water. Do not use harsh chemicals or abrasive cleaners. Rinse thoroughly and allow to air dry completely before deflating.
Repair: In case of small punctures, use a repair patch kit (often included or sold separately) to fix the damaged area. Ensure the surface is clean and dry before applying the patch.
Deflation: Open all air valves to allow the air to escape. Gently press on the bounce house to expedite deflation.
Storage: Once fully deflated and dry, fold the bounce house neatly and store it in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective bag to prevent damage.

Troubleshooting

Slow Deflation: If the bounce house slowly deflates, check all air valves to ensure they are securely closed. Inspect the entire surface for small punctures or leaks. A soapy water solution can help identify leaks by forming bubbles.
Tears or Splits: For larger tears or splits, especially along seams, repair may be difficult or impossible. Contact customer support for advice.
Instability: Ensure the bounce house is fully inflated and placed on a level surface. Uneven inflation or ground can cause instability.

Product Specifications

Model Number	48260EP
Dimensions (L x W x H)	68.5" x 68.5" x 44" (174 cm x 174 cm x 112 cm)
Material	Phthalate-free Polyvinyl Chloride (PVC)
Age Range	3 to 6 years
Maximum User Capacity	2 children
Maximum Weight Capacity	120 lbs (54 kg)
Item Weight	19.1 lbs (8.66 kg)

Diagram showing the dimensions of the Intex Jump-O-Lene bounce house — Image: A diagram illustrating the length, width, and height dimensions of the Intex Jump-O-Lene inflatable bounce house.

Icon representing the weight capacity of the Intex Jump-O-Lene bounce house — Image: An icon visually representing the weight capacity of the bounce house, indicating its structural limits.

Warranty and Customer Support

The manufacturer states that there is no applicable warranty for this product. For any questions, concerns, or assistance with your Intex Jump-O-Lene Inflatable Bounce House, please refer to the contact information provided on the product packaging or visit the official Intex website for customer support resources.

You can also visit the Intex Store on Amazon for more information and products.

Intex 48260EP