Toro ttt-9v Electronic Faucet Watering Programmer

1. Introduction

Thank you for choosing the Toro ttt-9v Electronic Faucet Watering Programmer. This device is designed to automate your watering schedule, providing convenience and efficiency for your garden or lawn. It allows for precise control over watering days, durations, and frequencies, operating automatically or manually.

This manual provides detailed instructions for installation, programming, operation, and maintenance to ensure optimal performance and longevity of your watering programmer.

2. Safety Information

Please read and understand all safety information before operating this device. Failure to follow these instructions may result in damage to the product or personal injury.

• Do not immerse the unit in water. It is designed to be water-resistant, not waterproof.
• Use only a 9V alkaline battery as specified. Incorrect battery types may cause damage.
• Do not expose the unit to extreme temperatures outside its operating range (40 degrees Celsius).
• Keep out of reach of children.
• Disconnect from the faucet and remove the battery during freezing temperatures to prevent damage.

3. Product Overview and Components

Familiarize yourself with the main components of your Toro ttt-9v watering programmer:

Figure 1: Front view of the Toro ttt-9v programmer. The image shows the grey unit with a clear LCD screen displaying '16:42' and '18'. Below the screen are buttons labeled 'On', 'Auto', 'Off', 'Time', 'Min', 'Hour', 'Day'. To the right of the screen are 'Man/Auto', 'Pro', and 'Esc' buttons. A 'Batt.L' indicator is visible on the left. The unit is mounted on a black stand, and a grey faucet connector is visible on the left side.

• LCD Display: Shows current time, programming settings, and status.
• Control Buttons:
  • Time, Min, Hour, Day: Used for setting time and date.
  • On, Auto, Off: Selects operating mode.
  • Man/Auto: Toggles between manual and automatic modes.
  • Pro (Program): Enters programming mode.
  • Esc (Escape): Exits current menu or cancels selection.
• Battery Compartment: Located on the back, for a 9V alkaline battery.
• Faucet Connector: Connects the unit to a standard outdoor faucet.
• Outlet Connector: Connects to a garden hose or irrigation system.

4. Setup

4.1. Battery Installation

1. Locate the battery compartment cover on the back of the unit.
2. Remove the cover by sliding or unscrewing it.
3. Insert one new 9V alkaline battery, ensuring correct polarity (+/-).
4. Replace the battery compartment cover securely to maintain water resistance.

Note: The unit will typically power on and display the current time or a default setting after battery installation.

4.2. Connecting to Faucet

1. Ensure your outdoor faucet is turned off.
2. Thread the faucet connector of the Toro ttt-9v programmer onto your outdoor faucet. Hand-tighten only; do not overtighten.
3. Connect your garden hose or irrigation system to the outlet connector at the bottom of the programmer.
4. Turn on your outdoor faucet fully. The programmer is designed to handle the water pressure.

5. Operating Instructions

5.1. Setting Current Time and Day

1. Press the Time button. The hour display will flash.
2. Use the Hour button to adjust the hour.
3. Press the Min button to adjust the minutes.
4. Press the Day button to set the current day of the week.
5. Press Esc or wait a few seconds for the settings to save.

5.2. Programming Automatic Watering Schedules

The Toro ttt-9v allows up to 8 watering cycles per day. You can select specific days and durations for each cycle.

1. Press the Pro (Program) button to enter programming mode. The display will show the first program number (e.g., P1).
2. Use the Hour and Min buttons to set the desired start time for the watering cycle.
3. Press the Day button to select the days of the week for this program. You can cycle through individual days, weekdays, weekends, or all days.
4. Press Pro again to move to the duration setting. Use the Hour and Min buttons to set the watering duration (e.g., 30 minutes).
5. Press Pro to save the current program and move to the next program number (P2, P3, etc.).
6. Repeat steps 2-5 for additional watering cycles.
7. Once all desired programs are set, press Esc to exit programming mode.

5.3. Operating Modes

• Auto Mode: Press the Auto button. The unit will follow the programmed watering schedules. This is the default and recommended mode for automated watering.
• Manual Mode: Press the Man/Auto button to switch to manual mode. You can then use the On button to start watering immediately and the Off button to stop it. This is useful for immediate, unscheduled watering.
• Off Mode: Press the Off button. The unit will not water automatically or manually. This is useful when you want to temporarily suspend all watering.

6. Maintenance

6.1. Battery Replacement

When the 'Batt.L' indicator appears on the LCD screen, it's time to replace the battery. Follow the battery installation steps in Section 4.1. Replace the battery annually, even if the indicator has not appeared, to ensure reliable operation.

6.2. Cleaning

Clean the exterior of the programmer with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the battery compartment and connectors are free of dirt and debris.

6.3. Winterization

Before the first frost or during periods of freezing temperatures, it is crucial to disconnect the watering programmer from the faucet. Remove the 9V alkaline battery and store the unit indoors in a dry, temperate place. This prevents damage to the internal components and battery connectors caused by freezing water or condensation.

7. Troubleshooting

8. Specifications

• Model: ttt-9v
• Brand: Toro
• Power Source: 1 x 9V Alkaline Battery
• Operating Pressure: 1.4 - 6.9 Bar (21-100 psi)
• Flow Rate: Approximately 15 Liters per hour (L/h)
• Operating Temperature: Up to 40 Degrees Celsius
• Display Type: LCD
• Color: Grey
• Watering Cycles: Up to 8 per day

9. Warranty and Support

For warranty information or technical support, please refer to the official Toro website or contact their customer service directly. Keep your purchase receipt as proof of purchase.