Oregon 22-080

Oregon Magnum Gatorline Trimmer Line User Manual

Model: 22-080

1. Product Overview

The Oregon Magnum Gatorline Trimmer Line, model 22-080, is a high-quality replacement part designed for various outdoor power tools. This product is manufactured to meet or exceed OEM specifications, ensuring reliable performance for your trimming needs.

Key Features:

Oregon Magnum Gatorline .080 inch Trimmer Line Spool

Figure 1: A large black spool of Oregon Magnum Gatorline trimmer line, gray in color, with product specifications and branding visible on the label. The label indicates a diameter of .080 inches (2.0 mm) and a length of 1,633 feet (501 meters). The UPC 0032488201044 is visible on the label.

2. Setup and Installation

This section provides general guidelines for installing trimmer line. Always refer to your specific trimmer's instruction manual for detailed, model-specific instructions.

Steps for Line Replacement:

  1. Safety First: Ensure the trimmer is turned off, unplugged (electric), or the spark plug wire is disconnected (gas) before handling. Wear appropriate safety gear, including gloves and eye protection.
  2. Remove Old Line: If applicable, remove any remaining old trimmer line from the spool or head.
  3. Prepare New Line: Cut the required length of Oregon Magnum Gatorline from the spool. The exact length will depend on your trimmer model; consult your trimmer's manual.
  4. Wind the Line: Follow your trimmer head's specific winding method. This typically involves feeding the line into designated holes and winding it evenly and tightly onto the spool, ensuring it does not overlap excessively.
  5. Reassemble Trimmer Head: Securely reattach the spool and any covers or caps to the trimmer head.
  6. Test: Briefly test the trimmer in a safe area to ensure the line feeds correctly and the trimmer operates as expected.

3. Operating Guidelines

The Oregon Magnum Gatorline is designed for efficient cutting of grass and light brush. Proper operation ensures optimal performance and safety.

Usage Tips:

4. Maintenance and Storage

Proper maintenance and storage of your trimmer line will extend its lifespan and ensure it performs optimally when needed.

Recommendations:

5. Troubleshooting

This section addresses common issues related to trimmer line performance.

ProblemPossible CauseSolution
Line breaks frequently
  • Hitting hard objects (rocks, concrete)
  • Line is old or brittle
  • Incorrect line diameter for trimmer
  • Line not wound properly on spool
  • Avoid contact with hard surfaces
  • Replace with fresh Oregon Magnum Gatorline
  • Ensure .080" line is compatible with your trimmer
  • Rewind line evenly and tightly
Line does not feed
  • Line tangled or stuck in spool
  • Spool or head mechanism dirty/damaged
  • Line too short
  • Remove head, untangle line, rewind
  • Clean or inspect trimmer head for damage
  • Replace with new, longer line

6. Specifications

7. Warranty and Support

Oregon products are known for their quality and durability. For specific warranty information regarding the Oregon Magnum Gatorline trimmer line, please refer to the official Oregon website or contact Oregon customer support directly. As an aftermarket part, warranty coverage typically applies to manufacturing defects.

Authorized Oregon Distributor Logo

Figure 2: This image displays the "Authorized Oregon Distributor" logo, signifying that the product is sourced from an official and legitimate channel.

For further assistance or to explore other genuine Oregon products, visit the official Oregon store: Oregon Official Store on Amazon