1. Introduction
Thank you for purchasing the Elk Home Thomas Lighting SL714515 Bella Bath Light. This fixture is designed to provide elegant and functional illumination for your bathroom space. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and maintenance are crucial for safe and efficient operation.
Image: The Thomas Lighting SL714515 Bella Bath Light in Oiled Bronze with five etched glass shades.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installing or servicing. Consult a qualified electrician if you are unsure about the installation process.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- This product is intended for indoor use only.
- Do not install this fixture in wet locations unless specifically rated for such use. This fixture is suitable for damp locations (bathroom).
- Ensure the mounting surface can support the weight of the fixture.
- Use only the specified bulb type and wattage (A19, up to 100 watts per bulb, not included).
- Handle glass components with care to prevent breakage.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please check your local laws before purchasing this product.
3. Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.
- Bella 5-Light Wall Lamp in Oiled Bronze (Fixture body)
- Etched Glass Shades (5 pieces)
- Mounting Hardware (Crossbar, mounting screws, wire nuts, decorative nuts)
- Instruction Manual
Note: A19 light bulbs are not included and must be purchased separately.
4. Setup and Installation
Assembly is required for this fixture. Follow these steps carefully for proper installation.
- Turn Off Power: Before starting, ensure the power supply to the electrical box is turned off at the circuit breaker or fuse box.
- Prepare Mounting Surface: Ensure the electrical box is securely mounted and capable of supporting the fixture's weight (approximately 11.7 pounds).
- Attach Mounting Crossbar: Secure the mounting crossbar to the electrical box using the provided screws. Ensure the crossbar is level.
- Make Electrical Connections: Connect the fixture's wires to the household electrical wires using the provided wire nuts. Match black to black (live), white to white (neutral), and bare copper or green to bare copper or green (ground). Ensure all connections are secure.
- Mount Fixture Body: Carefully align the fixture body with the mounting screws on the crossbar. Secure the fixture in place using the decorative nuts. The fixture can be mounted with the glass shades facing up or down, depending on your preference.
- Install Light Bulbs: Screw in five A19 incandescent light bulbs (not included) into the sockets. Do not exceed 100 watts per bulb.
- Attach Glass Shades: Carefully place each etched glass shade over its respective socket and secure it according to the fixture's design (typically by screwing a retaining ring or cap).
- Restore Power: Once installation is complete and all components are secure, restore power at the circuit breaker or fuse box.
Note on flush mounting: Some electrical box styles may make achieving a perfectly flush mount challenging. Adjustments to the mounting hardware or electrical box may be necessary in certain installations.
5. Operating Instructions
The Thomas Lighting SL714515 Bella Bath Light operates like a standard wall-mounted light fixture.
- Turning On/Off: Use the wall switch connected to the fixture to turn the light on or off.
- Dimmable Feature: This fixture is dimmable. If connected to a compatible dimmer switch (sold separately) and using dimmable A19 bulbs, you can adjust the light intensity.
6. Maintenance
Regular cleaning will help maintain the appearance and performance of your light fixture.
- Cleaning: Always turn off the power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Glass Shades: The etched glass shades can be removed and washed with mild soap and water. Ensure they are completely dry before reattaching.
- Bulb Replacement: Turn off power before replacing bulbs. Allow bulbs to cool completely before touching. Replace with A19 incandescent bulbs, not exceeding 100 watts per bulb.
7. Troubleshooting
If you experience issues with your fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | 1. Power is off. 2. Loose wire connections. 3. Faulty bulb. | 1. Check circuit breaker/fuse. 2. Turn off power, check all wire connections. 3. Replace bulb. |
| Light flickers. | 1. Loose bulb. 2. Loose wire connection. 3. Incompatible dimmer switch/bulb. | 1. Tighten bulb. 2. Turn off power, check wire connections. 3. Ensure dimmer and bulbs are compatible. |
| Fixture does not sit flush against wall. | Improper mounting hardware or electrical box configuration. | Ensure mounting crossbar is correctly installed. Adjust electrical box if possible, or consult an electrician for alternative mounting solutions. |
8. Specifications
- Model: SL714515
- Brand: Elk Home (formerly Thomas Lighting)
- Manufacturer: Philips Consumer Luminaires
- Finish: Oiled Bronze
- Material: Glass (Shades), Metal (Fixture Body)
- Style: Traditional
- Room Type: Bathroom
- Product Dimensions: 31"L x 6.5"W x 9"H
- Item Weight: 11.7 Pounds
- Power Source: Corded Electric
- Voltage: 120 Volts
- Number of Light Sources: 5
- Light Source Type: Incandescent
- Bulb Type: A19 (not included)
- Max Wattage: 100 watts per bulb
- Special Feature: Dimmable
- Mounting Type: Protruding
- Assembly Required: Yes
9. Warranty and Support
This product is covered by a manufacturer's warranty. For specific details regarding warranty coverage and duration, please refer to the documentation included with your purchase or contact Elk Home customer support.
For technical assistance, missing parts, or warranty claims, please contact Elk Home customer service. Contact information can typically be found on the product packaging or the official Elk Home website.