1. Product Overview
The Satco 80-1763 is a medium base, 2-light pull chain cluster socket designed for use in various lighting fixtures. It features a solid brass socket with a polished brass finish and includes 84-inch SPT-1 clear gold wire. This component is rated for 660 watts and 250 volts, providing a reliable solution for multi-bulb lighting applications controlled by a pull chain mechanism.
Image 1.1: The Satco 80-1763 Medium Base 2-Light Pull Chain Cluster Socket, showcasing its polished brass finish and dual pull chains.
2. Safety Information
Before installing or servicing this electrical component, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- Disconnect Power: Always turn off power at the circuit breaker or fuse box before installation, removal, or maintenance.
- Qualified Electrician: If you are unsure about any part of the installation process, consult a qualified electrician.
- Proper Wiring: Ensure all wiring connections are secure and comply with local electrical codes.
- Voltage and Wattage: Do not exceed the maximum rated wattage (660W) or voltage (250V) for this socket.
- Dry Location Use: This product is intended for use in dry, indoor locations unless otherwise specified by the fixture it is installed in.
3. Product Components
The Satco 80-1763 package typically includes the following:
- One (1) Satco 80-1763 Medium Base 2-Light Pull Chain Cluster Socket with 84-inch SPT-1 clear gold wire.
No additional accessories or tools are included with this component.
4. Setup and Installation
This socket cluster is designed to be integrated into a compatible lighting fixture. The following steps outline a general installation process. Specific fixture designs may require variations.
- Prepare the Fixture: Ensure the lighting fixture is de-energized and disassembled to access the internal wiring compartment.
- Mount the Socket Cluster: Secure the Satco 80-1763 cluster into the fixture's mounting point. This typically involves threading the central stem through a hole and securing it with a nut or other fastening mechanism provided by the fixture.
- Wire Connections: Connect the 84-inch SPT-1 clear gold wires from the socket cluster to the corresponding power wires of the lighting fixture. Typically, one wire from the socket connects to the 'hot' (live) wire and the other to the 'neutral' wire. Ensure connections are tight and insulated with wire nuts or appropriate connectors.
- Grounding (if applicable): If the fixture requires grounding, ensure the fixture's ground wire is properly connected according to local electrical codes.
- Reassemble Fixture: Carefully reassemble the lighting fixture, ensuring no wires are pinched and all components are securely in place.
- Install Bulbs: Screw in two medium base (E26) light bulbs into the sockets. Do not exceed the maximum wattage rating.
- Restore Power: Turn on power at the circuit breaker or fuse box and test the functionality of the pull chains.
5. Operation
The Satco 80-1763 socket cluster operates using two independent pull chains, one for each socket.
- Turning On/Off: Gently pull one of the chains to toggle the corresponding light bulb on or off.
- Independent Control: Each pull chain controls its respective socket independently, allowing for flexible lighting control.
6. Maintenance
Regular maintenance helps ensure the longevity and safe operation of your socket cluster.
- Cleaning: Ensure power is off before cleaning. Wipe the socket and pull chains with a dry, soft cloth. Avoid using abrasive cleaners or solvents.
- Inspection: Periodically inspect the wiring and connections for any signs of wear, fraying, or loose connections.
- Bulb Replacement: Always turn off power before replacing light bulbs. Allow bulbs to cool completely before handling.
7. Troubleshooting
If you encounter issues with your Satco 80-1763 socket cluster, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Bulb is faulty or loose. Pull chain mechanism is faulty. | Check circuit breaker/fuse. Replace bulb or tighten it. Inspect pull chain for damage; if faulty, replace the socket cluster. |
| Only one light turns on. | One bulb is faulty or loose. One pull chain mechanism is faulty. | Replace the non-working bulb or tighten it. Inspect the non-working pull chain; if faulty, replace the socket cluster. |
| Flickering light. | Loose bulb. Loose wiring connection. Incompatible bulb type. | Tighten bulb. Turn off power and check wiring connections. Ensure bulb is compatible with the socket. |
If troubleshooting steps do not resolve the issue, contact customer support or a qualified electrician.
8. Specifications
Detailed technical specifications for the Satco 80-1763 Medium Base 2-Light Pull Chain Cluster Socket:
| Feature | Detail |
|---|---|
| Model Number | 80-1763 |
| Brand | Satco |
| Socket Type | Medium Base (E26) |
| Number of Sockets | 2 |
| Control Mechanism | Independent Pull Chains |
| Maximum Wattage | 660 Watts |
| Maximum Voltage | 250 Volts |
| Material | Solid Brass (Socket) |
| Finish | Polished Brass |
| Wire Length | 84 inches (SPT-1 Clear Gold Wire) |
| Product Dimensions | Approximately 10 x 10 x 10 inches (as packaged) |
| Item Weight | Approximately 10 pounds (as packaged) |
9. Warranty and Support
For warranty information regarding the Satco 80-1763 Medium Base 2-Light Pull Chain Cluster Socket, please contact the manufacturer directly. Warranty terms and conditions may vary.
For technical support or further assistance, please refer to the contact information provided by Satco or your product retailer.
