Important Safeguards
When using your Oreck Speed Iron, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before use.
- Always ensure the iron is unplugged from the power outlet before filling or emptying water, cleaning, or when not in use.
- Do not immerse the iron, power base, or cord in water or other liquids.
- Keep the iron and its cord out of reach of children.
- Never touch the hot soleplate. Use handles and knobs.
- Use the iron only for its intended purpose.
- Do not operate the iron with a damaged cord or plug, or if the iron has been dropped or damaged.
- Always place the iron on a stable, heat-resistant surface when resting.
- Exercise caution when turning the iron upside down, as there may be hot water in the reservoir.
Product Overview
The Oreck Speed Iron Cord Free TX 850 is designed for efficient and convenient ironing. Its cord-free design allows for unrestricted movement, while the non-stick soleplate ensures smooth gliding over various fabrics.
Image: Oreck Speed Iron Cord Free TX 850 with its power base.
Key Features:
- Cord-Free Operation: Provides freedom of movement during ironing.
- Non-Stick Soleplate: Ensures easy gliding and prevents fabric sticking.
- Swivel Power Base: Allows for quick and easy placement and removal of the iron.
- Hideaway Cord Storage: For neat and compact storage of the power cord.
- True Temp Fabric Control: Adjustable temperature settings for different fabric types.
- Jet Steam Surge: Provides a powerful burst of steam for stubborn wrinkles.
Setup
- Unpacking: Carefully remove the iron and all accessories from the packaging. Retain packaging for future storage or transport.
- First Use Preparation: Before first use, wipe the soleplate with a soft, damp cloth to remove any manufacturing residue.
- Filling the Water Tank:
- Ensure the iron is unplugged and cooled.
- Open the water filler cap.
- Fill the water tank with distilled or demineralized water up to the 'MAX' fill line. Do not overfill.
- Close the water filler cap securely.
- Connecting to Power: Place the iron onto its swivel power base. Plug the power base cord into a standard electrical outlet.
Operating Instructions
- Heating Up: Once plugged in and placed on the power base, the iron will begin to heat. It heats up in approximately 60 seconds. The indicator light will turn off when the desired temperature is reached.
- Temperature Selection: Rotate the temperature control dial to select the appropriate heat setting for your fabric type. Refer to the fabric care labels on your garments.
- Cord-Free Ironing: Lift the iron from its power base. You can now iron freely without the cord. The iron will maintain its heat for a period, after which it will need to be returned to the base for reheating.
- Steam Ironing:
- Ensure the water tank is filled and the iron is set to a high temperature (e.g., Linen or Cotton). Steam will not be produced at lower temperatures.
- Press the steam button for a continuous flow of steam.
- For a powerful burst of steam (Jet Steam Surge), press the steam shot button. This is useful for removing stubborn creases.
- Dry Ironing: For dry ironing, ensure the water tank is empty or the steam function is turned off. Select the desired temperature and iron as usual.
- After Use: Return the iron to its power base. Unplug the power base from the wall outlet. Allow the iron to cool completely before storing.
Maintenance and Care
- Cleaning the Soleplate: If the soleplate becomes stained or dirty, clean it with a damp cloth and a non-abrasive cleaner designed for iron soleplates. Do not use metallic scouring pads or harsh abrasives.
- Emptying the Water Tank: After each use, and once the iron has cooled, empty any remaining water from the tank to prevent mineral buildup and leakage.
- Descaling: Periodically, if you notice reduced steam output or white residue, descale the iron according to general iron descaling instructions (e.g., using a vinegar solution or commercial descaler, following product instructions).
- Storage: Store the iron upright on its power base in a cool, dry place. Wrap the power cord around the hideaway cord storage area on the base.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Iron not heating | Not plugged in; not placed correctly on base; power outlet issue. | Check power cord connection; ensure iron is seated properly on the power base; test outlet with another appliance. |
| Iron leaking water | Water tank overfilled; temperature too low for steam; iron stored with water. | Do not fill past 'MAX' line; ensure iron is at a high enough temperature for steam; always empty water tank after use and before storage. |
| No steam or insufficient steam | Water tank empty; temperature setting too low; steam vents clogged. | Refill water tank; increase temperature setting; descale the iron if vents are clogged. |
| Iron sticks to fabric | Temperature too high for fabric; soleplate dirty. | Adjust temperature to suit fabric type; clean the soleplate. |
Specifications
- Model Number: TX 850
- Package Dimensions: 11.1 x 8.4 x 6.2 inches
- Item Weight: 3.25 pounds
- Manufacturer: Oreck Corporation
- Power: (Specific power details not provided in source, refer to product label)
Warranty and Support
Warranty Description:
Oreck Corporation warrants this product against any defects that are due to faulty material or workmanship for a two-year period after the original date of consumer purchase or receipt as a gift. This warranty does not include damage to the product resulting from accident or misuse. If the product should become defective within the warranty period, we will repair it or elect to replace it free of charge. We will return your product, transportation charges prepaid, provided it is delivered prepaid to any Oreck Corporation Authorized Service Center. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.
Customer Support:
For warranty claims, service, or technical assistance, please contact an Oreck Corporation Authorized Service Center. Refer to the official Oreck website or product packaging for the most current contact information and service center locations.