Flymo Genuine 5119164-00/1 Motor Instruction Manual

1. Product Overview

This manual provides essential information for the Flymo Genuine 5119164-00/1 Motor, designed as a direct replacement part for the Flymo Power Compact 400 lawnmower. This genuine component ensures optimal performance and durability for your equipment.

• Genuine Flymo replacement parts guarantee durability & performance.
• Exact fit component, manufactured to the highest standards.
• Direct replacement for the original part.

An image showing the Flymo Genuine 5119164-00/1 Motor, a replacement part for the Power Compact 400 lawnmower. The motor features a copper-wound stator and rotor assembly, with a black fan and drive shaft visible on one end, and electrical connections on the other.

2. Safety Information

Always prioritize safety when handling electrical components and performing repairs on power tools. Failure to follow these guidelines may result in injury or damage to equipment.

• Disconnect Power: Always ensure the lawnmower is unplugged from the mains power supply before attempting any inspection, maintenance, or repair.
• Qualified Personnel: Motor replacement should ideally be performed by a qualified technician or an individual with experience in electrical repairs.
• Personal Protective Equipment (PPE): Wear appropriate safety glasses and gloves to protect against potential hazards.
• Handle with Care: Motors can be heavy. Use proper lifting techniques to avoid injury.
• Electrical Connections: Ensure all electrical connections are secure and correctly insulated after installation.
• Storage: Store the motor in a dry, cool place, away from moisture and direct sunlight, until installation.

3. Compatibility

This motor (Part Number 5119164-00/1) is specifically designed for the Flymo Power Compact 400 lawnmower. It is crucial to verify that this part is suitable for your specific model before purchase and installation.

Important: Check your lawnmower's model number and existing motor's part number to ensure exact compatibility. Refer to your original lawnmower manual for detailed part information.

4. Installation (Setup)

The following steps provide a general guide for motor replacement. Due to the complexity and electrical nature of this task, professional installation is highly recommended.

1. Preparation:
   • Ensure the lawnmower is completely disconnected from the power supply.
   • Clear a clean, well-lit workspace.
   • Gather necessary tools (e.g., screwdrivers, wrenches, wire cutters, electrical tape).
2. Access the Motor:
   • Carefully remove the outer casing or housing of the lawnmower to expose the motor assembly. Refer to your lawnmower's service manual for specific instructions on disassembly.
3. Disconnect Old Motor:
   • Note or photograph the existing wiring connections before disconnecting them.
   • Carefully disconnect all electrical wires and remove any mounting bolts or screws securing the old motor.
   • Remove the old motor from its housing.
4. Install New Motor:
   • Position the new Flymo 5119164-00/1 Motor into the designated housing.
   • Secure it with the appropriate mounting bolts or screws, ensuring it is firmly seated.
   • Reconnect all electrical wires according to your previous notes or the lawnmower's wiring diagram. Ensure connections are tight and insulated.
5. Reassembly:
   • Carefully reassemble the lawnmower casing, ensuring all parts fit correctly and no wires are pinched.
   • Double-check all connections and ensure no tools or debris are left inside the housing.
6. Initial Test:
   • Before full operation, perform a brief test in a safe, clear area to ensure the motor functions correctly and there are no unusual noises or vibrations.

If you are unsure about any step, consult a qualified professional or the official Flymo service center.

5. Operating

As a replacement component, the Flymo 5119164-00/1 Motor operates as an integral part of your Flymo Power Compact 400 lawnmower. Once correctly installed, the motor will function automatically when the lawnmower is powered on and operated according to its original user manual.

Refer to your Flymo Power Compact 400 lawnmower's original instruction manual for detailed operating procedures, safety guidelines, and usage recommendations.

6. Maintenance

The Flymo 5119164-00/1 Motor is designed for long-term reliability and typically requires minimal direct maintenance. However, proper care of the overall lawnmower will contribute to the motor's longevity.

• Keep Clean: Ensure the motor's ventilation openings are free from grass clippings, dirt, and debris to prevent overheating.
• Avoid Moisture: Protect the lawnmower and its motor from excessive moisture and rain. Store in a dry environment.
• Regular Inspection: Periodically inspect the motor area for any loose connections, damaged wires, or unusual wear. Address any issues promptly.
• Professional Service: For any internal motor issues or complex maintenance, consult a qualified service technician.

7. Troubleshooting

If your lawnmower experiences issues after motor replacement, consider the following common troubleshooting steps. Always disconnect power before inspection.

For issues not listed or if troubleshooting steps do not resolve the problem, contact Flymo customer support or a certified service center.

8. Specifications

9. Warranty and Support

As a genuine Flymo replacement part, this motor is covered by Flymo's standard manufacturer's warranty for replacement components. Please retain your proof of purchase for warranty claims.

For detailed warranty terms, technical support, or to locate an authorized service center, please visit the official Flymo website or contact Flymo customer service directly. You can often find contact information in your original lawnmower's manual or on the Flymo brand website.

Flymo Store Link: Visit the Flymo Store on Amazon.co.uk