Theater Solutions TS50W In-Wall Speaker System Instruction Manual

Introduction

Congratulations on your purchase of the Theater Solutions TS50W In-Wall Speaker System. These speakers are designed to provide high-quality audio performance for home theater, surround sound, or multi-room audio installations. Engineered with durable, moisture-resistant materials, they offer rich bass and full-bodied sound. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your speakers.

What's in the Box

Your Theater Solutions TS50W speaker package includes the following items:

• Two (2) Theater Solutions TS50W In-Wall Speakers with Grilles
• Cut-out Template
• Instruction Manual

Image: A pair of Theater Solutions TS50W in-wall speakers, with their white grilles partially removed, showcasing the black speaker components and the mounting clamps on the white frames.

Setup and Installation

Proper installation is crucial for optimal sound performance. Please follow these steps carefully.

System Requirements

• Compatible with any home audio receiver or amplifier with raw speaker wire outputs.
• Amplifier power should be between 10 and 200 watts per channel.
• Use CL3 certified in-wall speaker wire to connect your receiver to the speakers.

Speaker Location Guide

To achieve the best performance from your Theater Solutions speakers, it is important to carefully select the location for installation. These speakers are ideal for discreet, individual, or multi-room installations in various environments, including bathrooms, kitchens, and saunas, due to their moisture-resistant design.

Installation Steps

1. Prepare the Opening: Use the provided cut-out template to mark the desired location on your drywall. Ensure there are no studs, electrical wires, or plumbing behind the wall in the chosen area.

   Image: A white paper template labeled "CUT-OUT TEMPLATE USE INSIDE EDGE" and "TS50W PAINT MASKING TEMPLATE," used for marking the precise opening size on a wall for speaker installation.

2. Cut the Opening: Carefully cut along the marked line using a drywall saw.
3. Run Speaker Wires: Route CL3 rated speaker wire from your amplifier/receiver to the speaker opening. Leave enough slack for easy connection.
4. Connect Speaker Wires: Connect the speaker wires to the spring-loaded raw wire connections on the back of the speaker. Ensure correct polarity (+ to + and - to -).

   Image: The rear view of a Theater Solutions TS50W in-wall speaker, revealing the internal components such as the crossover circuit board, speaker wire terminals, and the back of the 5.25-inch woofer.

5. Mount the Speaker: Insert the speaker into the cut-out opening. The press-lock mounting system will firmly secure the speaker to the drywall. Tighten the mounting screws (usually located on the front baffle) until the speaker is snug against the wall. Do not overtighten.

   Image: A single Theater Solutions TS50W in-wall speaker shown at an angle, with its white grille partially lifted to reveal the black speaker components and the white frame with mounting clamps extended.
6. Attach the Grille: Place the white aluminum grille over the speaker. The grille is paintable to match your decor.

   Image: A close-up front view of the Theater Solutions TS50W in-wall speaker with the grille removed, clearly showing the 5.25-inch woven Kevlar woofer and the 1-inch pivoting silk dome tweeter.

Tweeter Adjustment

The 1-inch pivoting silk dome tweeter can be adjusted to direct sound towards the listening area, optimizing sound dispersion for your specific room layout.

Operating Instructions

Once installed, your Theater Solutions TS50W speakers operate as passive speakers, driven by your home audio receiver or amplifier.

• Power On: Turn on your amplifier/receiver.
• Source Selection: Select the desired audio source (e.g., CD player, streaming device, TV).
• Volume Control: Adjust the volume using your amplifier/receiver's controls. Start at a low volume and gradually increase to a comfortable listening level.
• Sound Optimization: If your receiver has room correction features, run the calibration process to optimize the sound for your listening environment.

Maintenance

Your Theater Solutions TS50W speakers are designed for durability and require minimal maintenance.

• Cleaning: Gently wipe the grilles and speaker frames with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Grille Painting: If you choose to paint the grilles, ensure they are clean and dry. Use a fine-mist spray paint for an even finish. Allow to dry completely before reattaching.
• Moisture: While designed to be moisture-resistant, avoid direct exposure to water or excessive humidity.

Troubleshooting

If you experience issues with your speakers, refer to the following common solutions:

• No Sound:
  • Check all speaker wire connections at both the speaker and the amplifier/receiver. Ensure correct polarity.
  • Verify that the amplifier/receiver is powered on and the correct input source is selected.
  • Test with another audio source or speaker if possible to isolate the problem.
• Distorted Sound:
  • Reduce the volume on your amplifier/receiver. Overdriving the speakers can cause distortion.
  • Check speaker wire connections for loose strands or short circuits.
  • Ensure your amplifier's power output is within the recommended range (10-200 watts per channel).
• Uneven Sound:
  • Check the balance settings on your amplifier/receiver.
  • Ensure both speakers are connected with correct polarity.
  • Adjust the pivoting tweeter to direct sound towards the listening area.

Specifications

Warranty and Support

Theater Solutions products come with a limited warranty. For specific warranty details and support inquiries, please refer to the warranty card included with your product or visit the official Theater Solutions website.

For technical assistance or further questions, please contact Theater Solutions customer support.