QA1 Precision Products TS708 Shock User Manual

Product Overview

The QA1 TS708 Shock is a high-performance, single-adjustable shock absorber designed for automotive applications, specifically for the rear position. It features a durable anodized finish and is engineered to provide precise control over vehicle suspension. This manual provides essential information for the proper installation, operation, and maintenance of your TS708 shock.

Key features include: SHOCK STOCKER S-ADJ 13.5020.50 STUD/EYE-P.

Setup and Installation

Proper installation is crucial for the performance and longevity of your QA1 TS708 shock. It is recommended that installation be performed by a qualified mechanic.

Image: The QA1 TS708 shock absorber, a silver cylindrical unit with black end fittings and an adjustment dial, shown alongside its associated mounting hardware including black rubber bushings, silver washers, and hexagonal nuts.

Safety Precautions:

• Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
• Ensure the vehicle is securely supported on jack stands or a lift before beginning work.
• Never work under a vehicle supported only by a jack.
• Refer to your vehicle's service manual for specific suspension component removal and installation procedures.

Installation Steps (General Guidelines):

1. Prepare the Vehicle: Park the vehicle on a level surface, engage the parking brake, and block the wheels. Lift the vehicle and support it securely.
2. Remove Old Shock: Carefully remove the existing shock absorber by unbolting its upper and lower mounting points. Note the orientation of any bushings or washers.
3. Inspect Mounting Points: Clean and inspect the vehicle's shock mounting points for any damage or wear.
4. Install New Shock: Install the QA1 TS708 shock, ensuring all bushings, washers, and nuts are correctly positioned. The TS708 features a stud/eye-P mounting configuration.
5. Tighten Fasteners: Torque all fasteners to the vehicle manufacturer's specifications. Do not overtighten.
6. Lower Vehicle: Carefully lower the vehicle to the ground.
7. Final Check: Bounce the vehicle to settle the suspension and re-check all fasteners for tightness.

Operating and Adjustment

The QA1 TS708 is a single-adjustable shock, meaning its damping characteristics can be tuned to suit various driving conditions and preferences. The adjustment is typically made via a dial located on the shock body.

Adjustment Guidelines:

• Understanding Adjustment: The adjustment dial controls the rebound damping. Turning the dial typically increases or decreases the resistance to the shock extending.
• Initial Setting: Start with the manufacturer's recommended baseline setting, if available, or a neutral setting (e.g., halfway through the adjustment range).
• Testing and Fine-tuning: Drive the vehicle in various conditions and adjust the shocks incrementally. A firmer setting (more damping) can improve handling and reduce body roll, while a softer setting (less damping) can improve ride comfort.
• Symmetry: Ensure both rear shocks are set to the same adjustment level for balanced performance.
• Note: Refer to QA1's official documentation or website for specific adjustment procedures and recommended settings for your application.

Maintenance

Regular maintenance helps ensure optimal performance and extends the lifespan of your QA1 TS708 shocks.

• Regular Inspection: Periodically inspect the shocks for signs of leaks, damage, or wear on the body, seals, and mounting points.
• Cleanliness: Keep the shock bodies clean, especially around the shaft and seals, to prevent dirt and debris from causing premature wear. Use mild soap and water.
• Fastener Check: Annually check the tightness of all mounting bolts and nuts.
• Bushing Inspection: Inspect the rubber bushings for cracking, hardening, or excessive wear. Replace them if necessary.

Troubleshooting

If you experience issues with your QA1 TS708 shocks, consider the following common problems and solutions:

If troubleshooting steps do not resolve the issue, contact QA1 customer support or a certified automotive technician.

Specifications

Warranty and Support

QA1 Precision Products stands behind the quality of its products. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official QA1 website.

Customer Support:

If you have questions regarding the installation, operation, or maintenance of your TS708 shock, or require technical assistance, please contact QA1 customer support directly. Contact information can typically be found on the QA1 official website or product packaging.

Note: Always provide your product model number (TS708) and any relevant purchase details when contacting support.