Air Lift 25870 WirelessOne (1st Generation) Compressor System User Manual

Product Overview

The Air Lift WirelessOne (1st Generation) Compressor System provides convenient, on-demand air pressure control for your vehicle's air springs. This single-path system allows for equal inflation of both air springs, enhancing stability and ride quality when towing or hauling. It features a digital gauge for precise pressure monitoring and a low-pressure sensor that automatically activates the compressor to maintain safe air spring pressure.

Key Features

• Single path controller for equal inflation of both air springs.
• 3 memory settings for frequent users.
• Integrated manifold and wiring harness for easy installation.
• Changeable back light to match vehicle interiors.
• Low pressure sensor automatically activates the air compressor if air spring pressure falls below a safe level.

Package Contents

Your Air Lift WirelessOne system includes all necessary components for installation and operation.

Image: The complete Air Lift WirelessOne Compressor System kit, including the compressor, wiring harness, air lines, remote control, and various fittings and mounting hardware.

Included Components

• Air Compressor
• Wireless Remote Control
• Integrated Manifold
• Wiring Harness
• Air Lines
• Mounting Hardware
• Fuses and Electrical Connectors

Setup and Installation

The Air Lift WirelessOne system is designed for straightforward installation, typically completed in under two hours. For detailed visual guidance, please refer to the official product video below.

General Installation Steps

1. Select a suitable mounting location for the compressor and manifold on the vehicle's frame, ensuring protection from elements.
2. Securely mount the compressor and manifold.
3. Connect the wiring harness to the vehicle's power source and the compressor.
4. Route and connect the air lines from the compressor to your air springs.
5. Perform a system check to ensure proper function and seal.

Operating Instructions

The WirelessOne system allows you to inflate and deflate your air springs with ease using the included remote control.

Remote Control Operation

Image: The Air Lift WirelessOne remote control with a digital display showing air pressure and buttons for inflation and deflation.

• The remote control features a digital display showing the current air pressure in your air springs.
• Use the "Up" arrow button to increase air pressure and the "Down" arrow button to decrease air pressure.
• The system is single-path, meaning both air springs will inflate or deflate equally.
• Three memory settings are available to store frequently used pressure levels (e.g., for different loads or trailers). Consult your full manual for programming instructions.
• The remote's backlight color can be changed to match your vehicle's interior.

Automatic Pressure Monitoring

The WirelessOne system includes a low-pressure sensor. If the air spring pressure falls below a safe, pre-set level, the compressor will automatically activate to restore the required pressure, ensuring consistent performance and safety.

Maintenance

Regular inspection of your Air Lift WirelessOne system is recommended to ensure optimal performance and longevity.

• Periodically check all air line connections for leaks.
• Inspect the compressor and manifold for any signs of damage or corrosion.
• Ensure the wiring harness connections are secure and free from wear.
• Keep the compressor free from excessive dirt and debris.

Troubleshooting

If you encounter issues with your WirelessOne system, consider the following common troubleshooting points:

• Compressor Not Activating: Check power connections and fuses. Ensure the remote control has fresh batteries. Verify the low-pressure sensor is functioning correctly.
• Air Leakage: Inspect all air line connections, Schrader valves, and air springs for audible leaks. Use a soapy water solution to identify small leaks.
• Inaccurate Pressure Reading: Ensure the remote control is within range and has a clear signal to the manifold. Check for any obstructions.
• System Malfunction: If the system displays an error or behaves unexpectedly, refer to the detailed troubleshooting section in your complete owner's manual or contact Air Lift customer support.

Specifications

Warranty and Support

Manufacturer's Warranty

The Air Lift 25870 WirelessOne (1st Generation) Compressor System comes with a 2 Year Limited Warranty from the manufacturer, Air Lift. Please retain your proof of purchase for warranty claims.

Customer Support

For any questions regarding installation, operation, troubleshooting, or warranty, Air Lift's USA-based customer service and technical support team is available to assist you. Refer to the official Air Lift website for contact information.