Acoustic Audio by Goldwood PSC-32 Center Channel Speaker Instruction Manual

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Acoustic Audio by Goldwood PSC-32 Center Channel Speaker. Please read these instructions thoroughly before use to ensure optimal performance and longevity of your product. Retain this manual for future reference.

Figure 1: Front view of the Acoustic Audio PSC-32 Center Channel Speaker. This image displays the speaker's black finish and front grille, with the Acoustic Audio logo visible at the bottom center.

Safety Instructions

• Placement: Position the speaker on a stable, level surface to prevent accidental falls. Ensure adequate ventilation around the speaker to prevent overheating.
• Power Handling: Do not exceed the recommended power input of 125 watts. Overpowering the speaker can lead to damage.
• Moisture: Keep the speaker away from water, moisture, and high humidity environments.
• Cleaning: Disconnect from power before cleaning. Use a soft, dry cloth. Avoid liquid cleaners or abrasive materials.
• Servicing: Do not attempt to open or service the speaker yourself. Refer all servicing to qualified personnel.

Package Contents

Verify that all items are present in the package:

• 1 x Acoustic Audio PSC-32 Center Channel Speaker

Product Features

The Acoustic Audio PSC-32 Center Channel Speaker is designed to enhance your home theater audio experience with clear dialogue and robust sound. Key features include:

• Speaker Configuration: Two 3-inch full-range woofers for balanced audio reproduction.
• Power Handling: Recommended power input of 15-125 watts.
• Frequency Response: 85Hz-20kHz.
• Efficiency: 89dB.
• Impedance: 8 Ohm.
• Design: 2-way passive speaker system.
• Enclosure: Digitally tuned bass reflex cabinet to minimize internal vibrations.
• Finish: Black ash wood grain veneer for a refined aesthetic.
• Shielding: Video shielded to prevent interference with CRT displays (less relevant for modern LCD/LED TVs).
• Connectivity: Quick release spring-loaded wire terminals for secure speaker wire connection.

Setup

1. Placement

For optimal performance in a home theater system, the center channel speaker should be placed directly above or below your television screen, centered horizontally. This ensures that dialogue and on-screen sound effects are accurately localized to the visual source.

2. Connection to an Amplifier/Receiver

The PSC-32 is a passive speaker and requires connection to an amplifier or AV receiver. Use high-quality speaker wire for the best audio transmission.

1. Ensure your amplifier/receiver is turned off and unplugged from the power outlet.
2. Locate the speaker terminals on the rear of the PSC-32 speaker and on your amplifier/receiver.
3. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of your speaker wire. Twist the bare wire strands tightly.
4. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal on your amplifier/receiver's center channel output.
5. Connect the negative (-) terminal (black) on the speaker to the negative (-) terminal on your amplifier/receiver's center channel output.
6. Ensure that no stray wire strands are touching other terminals, which could cause a short circuit.

Figure 2: Rear view of the PSC-32 speaker. This image shows the quick release spring-loaded wire terminals (red for positive, black for negative) and a mounting hang tab.

Operating Instructions

Once the speaker is correctly connected to your amplifier/receiver:

1. Plug in and power on your amplifier/receiver.
2. Select the appropriate audio input source on your amplifier/receiver.
3. Gradually increase the volume to a comfortable listening level.
4. Adjust the center channel level on your amplifier/receiver as needed to balance dialogue with other audio elements in your home theater system. Refer to your amplifier/receiver's manual for specific audio calibration instructions.

Maintenance

• Cleaning: Use a soft, dry, lint-free cloth to clean the speaker cabinet. Do not use liquid cleaners, aerosols, or solvents, as these may damage the finish or internal components.
• Grille: The acoustically transparent grille is not designed to be easily removable. Avoid attempting to remove it to prevent damage.
• Environment: Avoid exposing the speaker to direct sunlight, extreme temperatures, or high humidity.

Troubleshooting

If you encounter issues with your PSC-32 speaker, consult the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support or a qualified technician.

Specifications

Detailed specifications for the Acoustic Audio PSC-32 Center Channel Speaker:

• Model: PSC-32
• Mounting Type: Shelf Mount
• Material: Wood
• Speaker Type: Center Channel, Bookshelf
• Recommended Uses: Home Theater, Indoor
• Product Dimensions (D x W x H): 4.92" x 21" x 10.03"
• Item Weight: 3.8 Pounds (approximately 1.72 kg)
• Impedance: 8 Ohm
• Speaker Maximum Output Power: 124 Watts
• Frequency Response: 20 KHz (upper limit, full range is 85Hz-20kHz)
• Audio Output Mode: Surround
• Woofer Diameter: 3 Inches (x2)
• Color: Black
• Number of Items: 1

Figure 3: Dimensions of the PSC-32 speaker. This image illustrates the speaker's width (21 inches), height (10.03 inches), and depth (4.92 inches).

Warranty and Support

The Acoustic Audio by Goldwood PSC-32 Center Channel Speaker comes with a Lifetime Warranty. For warranty claims, technical assistance, or any product-related inquiries, please contact your authorized dealer or the manufacturer directly. Please have your product model number (PSC-32) and purchase information ready when contacting support.