Newport Brass 2480/24A
Newport Brass Priya Bathroom Faucet Instruction Manual
Model: 2480/24A
Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Newport Brass 2480 Priya Widespread Bathroom Faucet. Designed with a modern aesthetic featuring a "C" shaped spout and metal lever handles, this faucet combines sleek design with functional ease of use. Please read all instructions carefully before beginning installation to ensure proper function and longevity of your product.
Image: Newport Brass 2480 Priya Widespread Bathroom Faucet in French Gold finish. The image displays the central arched spout and two separate lever handles, all in a polished gold tone, designed for a three-hole deck mount installation.
Setup and Installation
The Newport Brass 2480 Priya faucet is designed for widespread mounting on a 3-hole sink or countertop with 8-inch centers. All necessary hardware for installation is included.
Tools and Materials Required (Not Included):
- Adjustable wrench
- Plumber's putty or silicone sealant
- Phillips head screwdriver
- Flashlight (optional)
- Safety glasses
Installation Steps:
- Prepare the Sink/Countertop: Ensure the mounting surface is clean and dry. The faucet requires three holes with 8-inch centers. Verify your sink or countertop meets these requirements. The maximum deck thickness supported is 2 inches.
- Install the Spout Assembly: Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet spout. Insert the spout assembly through the center hole of the sink/countertop. From underneath, secure the spout with the provided washer and mounting nut, tightening firmly but carefully.
- Install the Handle Assemblies: Repeat the process for the two lever handle assemblies. Apply sealant to the base of each handle and insert them into the left and right holes. Secure from underneath with their respective washers and mounting nuts. Ensure handles are oriented correctly.
- Connect Water Supply Lines: Attach the hot and cold water supply lines to the corresponding inlets on the faucet body. Use an adjustable wrench to tighten connections, ensuring they are secure but do not overtighten. Connect the other ends of the supply lines to your hot and cold water stops.
- Install Pop-Up Drain Assembly: Follow the instructions provided with the pop-up drain assembly to install it into the sink drain hole. Ensure a watertight seal using plumber's putty or silicone sealant as directed. Connect the lift rod to the faucet's pop-up mechanism.
- Test for Leaks: Once all connections are made, slowly turn on the water supply to the faucet. Check all connections for any signs of leaks. If leaks are present, tighten the connections slightly until the leak stops.
Operating Instructions
The Newport Brass 2480 Priya faucet features two lever handles for controlling water flow and temperature.
- Water Flow: To turn on the water, lift either lever handle. The further you lift, the greater the water flow.
- Temperature Control:
- To obtain cold water, lift the right-hand lever handle.
- To obtain hot water, lift the left-hand lever handle.
- To mix hot and cold water, lift both handles simultaneously and adjust their positions until the desired temperature is achieved.
- Turning Off: Push the lever handles down to stop the water flow.
Maintenance
Regular cleaning and maintenance will help preserve the finish and functionality of your Newport Brass faucet.
- Cleaning the Finish: Clean the faucet regularly with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishes that may damage the French Gold (PVD) finish. Mild soap and water are recommended for routine cleaning.
- Aerator Maintenance: If water flow decreases, the aerator at the end of the spout may be clogged. Unscrew the aerator, rinse out any debris, and reattach it.
- Leak Prevention: Periodically check under the sink for any signs of leaks around the connections. Tighten connections gently if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator; partially closed water supply valves. | Clean aerator (see Maintenance section); ensure water supply valves are fully open. |
| Leaking at Faucet Base | Improperly sealed base during installation; loose mounting nut. | Ensure proper application of plumber's putty/sealant; tighten mounting nut from underneath the sink. |
| Leaking from Handle Base | Loose handle mounting nut. | Tighten handle mounting nut from underneath the sink. |
| Dripping from Spout | Worn washerless valve (unlikely for new faucet); debris in valve. | Contact Newport Brass customer support if issue persists after checking other causes. |
Specifications
- Model: 2480/24A Priya Widespread Bathroom Faucet
- Brand: Newport Brass
- Finish: French Gold (PVD)
- Material: Brass
- Mounting Type: Deck Mount, Widespread
- Hole Count: 3 (8-inch centers)
- Number of Handles: 2 (Lever Type)
- Flow Rate: 1.20 gallons-per-minute
- Faucet Height: 9-7/16 inches (deck to top of faucet)
- Spout Height: 6-1/8 inches (deck to spout outlet)
- Spout Reach: 5-9/16 inches (faucet base to spout outlet)
- Maximum Deck Thickness: 2 inches
- Faucet Hole Size: 1-3/8 inches
- Included Components: Faucet body, lever handles, washerless valve, pop-up drain assembly, installation hardware.
- Compliance: ADA standards, Low lead compliant.
Warranty and Support
The Newport Brass 2480 Priya Bathroom Faucet is covered under Newport Brass's limited lifetime warranty for residential use and limited lifetime commercial warranty for commercial applications. This warranty covers defects in material and manufacturing. For detailed warranty information, claims, or technical support, please refer to the official Newport Brass website or contact their customer service department directly.
Newport Brass Customer Service: Please visit www.newportbrass.com for contact information and support resources.