Thomson 00131957

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Thomson WHP 3001 Wireless Headphones User Manual

Model: WHP3001BK (00131957)

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Thomson WHP 3001 Wireless Headphones. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

Thomson WHP 3001 Wireless Headphones and Charging Station

Image: The Thomson WHP 3001 wireless headphones resting on their black charging station. The headphones are black with padded earcups and a comfortable headband. The charging station has indicator lights for 'CHARGE' and 'SIGNAL/POWER'.

Safety Instructions

Always observe the following safety precautions to prevent injury or damage to the device:

  • Do not expose the headphones or charging station to extreme temperatures, direct sunlight, or high humidity.
  • Avoid dropping or subjecting the device to strong impacts.
  • Do not attempt to disassemble or repair the unit yourself. Refer all servicing to qualified personnel.
  • Keep out of reach of children.
  • Dispose of batteries responsibly according to local regulations.
  • Prolonged listening at high volume levels can cause hearing damage. Adjust volume to a comfortable level.

Package Contents

Ensure all items are present in the package:

  • Thomson WHP 3001 Wireless Headphones
  • Charging Station / Transmitter
  • AC/DC Power Adapter
  • Audio Connection Cable (3.5mm jack)
  • RCA Adapter (if included)
  • 2x AAA NiMH Rechargeable Batteries (pre-installed or separate)
  • User Manual (this document)
Back of Thomson WHP 3001 packaging showing contents

Image: The back of the product packaging, illustrating the included components such as headphones, charging station, power adapter, and various cables, along with multilingual feature descriptions.

Product Overview

Familiarize yourself with the main components of your wireless headphone system.

Headphones:

  • Volume Control: Adjusts the listening volume.
  • Power/Scan Button: Turns headphones on/off and initiates automatic frequency scan.
  • Power Indicator LED: Shows power status and charging status.
  • Padded Earcups: For comfortable listening.
  • Adjustable Headband: For a secure and comfortable fit.

Charging Station / Transmitter:

  • Charging Cradle: Place headphones here to charge.
  • CHARGE Indicator LED: Illuminates when headphones are charging.
  • SIGNAL/POWER Indicator LED: Indicates power to the transmitter and signal presence.
  • Audio Input (3.5mm jack): Connects to your audio source (TV, stereo, etc.).
  • DC IN Port: Connects to the AC/DC power adapter.
Person using Thomson WHP 3001 headphones, highlighting controls

Image: A person wearing the Thomson WHP 3001 headphones, with an inset showing a close-up of the right earcup's controls, including the power/scan button and volume dial.

Hands adjusting Thomson WHP 3001 headphones

Image: A pair of hands demonstrating the adjustability of the Thomson WHP 3001 headphones' headband and earcups.

Setup

1. Connecting the Charging Station / Transmitter:

  1. Connect the AC/DC power adapter to the "DC IN" port on the back of the charging station.
  2. Plug the power adapter into a wall outlet. The SIGNAL/POWER LED on the charging station should illuminate.
  3. Connect the audio connection cable (3.5mm jack) from the "AUDIO IN" port on the charging station to the audio output (e.g., headphone jack, RCA audio out) of your audio source (TV, stereo system, MP3 player). Use the RCA adapter if necessary.
Back of Thomson WHP 3001 charging station with cables connected

Image: A close-up view of the back of the Thomson WHP 3001 charging station, showing the power adapter and audio cables (3.5mm jack and RCA) connected to their respective ports.

2. Charging the Headphones:

  1. Ensure the 2x AAA NiMH rechargeable batteries are correctly inserted into the headphone battery compartment (if not pre-installed).
  2. Place the headphones onto the charging cradle of the transmitter. Ensure the charging contacts align.
  3. The "CHARGE" indicator LED on the charging station will illuminate, indicating that the headphones are charging.
  4. A full charge takes approximately 8 hours. For first use, charge the headphones completely.
Thomson WHP 3001 headphones on charging station in a home setting

Image: The Thomson WHP 3001 wireless headphones are shown on their charging station, placed on a table in a living room setting, ready for use or charging.

Operating Instructions

1. Turning On/Off:

  • To turn on the headphones, press and hold the Power/Scan button on the right earcup until the Power Indicator LED illuminates.
  • To turn off, press and hold the Power/Scan button again until the LED turns off.

2. Adjusting Volume:

  • Use the volume control dial on the right earcup to adjust the listening volume to a comfortable level.
  • Ensure the audio source volume is also set appropriately.

3. Automatic Frequency Scan (Auto Scan):

  • If you experience static or poor sound quality, briefly press the Power/Scan button on the headphones while they are on. This will initiate an automatic scan to find the clearest available frequency.
  • The transmitter also features PLL (Phase-Locked Loop) technology for stable signal transmission.

4. Range:

  • The headphones offer a range of up to 100 meters in open spaces.
  • Indoors, the range is typically 20 to 30 meters, depending on obstacles and wall materials.
Person using Thomson WHP 3001 headphones outdoors

Image: A young woman smiling and wearing the Thomson WHP 3001 headphones outdoors near a body of water, demonstrating the wireless freedom and range of the product.

Person using Thomson WHP 3001 headphones indoors

Image: A person comfortably seated indoors, wearing the Thomson WHP 3001 headphones and holding a mug, illustrating the product's suitability for home use.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the headphones and charging station. Do not use liquid cleaners or aerosols.
  • Battery Care:
    • Always use the supplied NiMH rechargeable batteries. Do not use non-rechargeable batteries.
    • If the headphones will not be used for an extended period, remove the batteries to prevent leakage.
    • Recharge the batteries fully before long storage periods.
  • Storage: Store the device in a cool, dry place away from direct sunlight and dust.

Troubleshooting

ProblemPossible CauseSolution
No sound or weak sound
  • Headphones not turned on.
  • Batteries low/dead.
  • Audio cable not connected properly.
  • Audio source volume too low.
  • Headphones out of range.
  • Interference.
  • Press Power/Scan button to turn on.
  • Charge headphones fully.
  • Check all cable connections.
  • Increase volume on audio source and headphones.
  • Move closer to the transmitter.
  • Press Auto Scan button on headphones to find a clear channel.
Static or distorted sound
  • Interference from other wireless devices.
  • Headphones out of range.
  • Weak signal.
  • Press Auto Scan button on headphones.
  • Move closer to the transmitter.
  • Ensure transmitter is not blocked by large metal objects.
Headphones not charging
  • Headphones not seated correctly on cradle.
  • Power adapter not connected.
  • Batteries not inserted or faulty.
  • Adjust headphones on cradle until CHARGE LED illuminates.
  • Check power adapter connection to outlet and charging station.
  • Verify batteries are correctly inserted and are rechargeable NiMH type.

Specifications

FeatureDetail
ModelWHP3001BK (00131957)
ColourBlack
LineOver-Ear UHF
Transducer Diameter40 mm
Crosstalk30 dB
MaterialPlastic
Signal Ratio / Noise Ratio54 dB
Sensitivity107 dB
StructureHi-Fi
Maximum Distortion Rate2%
Run Time (average volume)8 hours
Connector3.5mm jack male
TransmissionWireless (UHF)
Carrying Frequency863 MHz
Bandwidth20 Hz - 20 kHz
Impedance32 Ω
Range100 m (open spaces) / 20-30 m (indoors)
Batteries2x AAA NiMH (included)
Product Dimensions14 x 30.6 x 28.6 cm
Weight499 g
EAN Number4047443124371
Infographic showing 20Hz-20kHz frequency, 100m range, and max 8h battery life

Image: An infographic displaying key specifications: frequency response from 20 Hz to 20 kHz, a wireless range of 100 meters, and a maximum battery life of 8 hours.

Warranty and Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Thomson website. Keep your purchase receipt as proof of purchase.

Manufacturer: Thomson

© 2024 Thomson. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.