1. Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Elo 2201L 22-inch IntelliTouch Touchscreen Monitor. Please read these instructions carefully before using the product to ensure optimal performance and longevity.
Image 1.1: Front view of the Elo 2201L 22-inch IntelliTouch Touchscreen Monitor. The monitor features a black bezel and stand, with the Elo logo displayed on the screen.
2. Setup
2.1 Unpacking
- Carefully remove the monitor and its components from the packaging.
- Verify that all listed components are present: Elo 2201L monitor, power adapter, power cord, USB cable, DVI cable, VGA cable.
- Retain the original packaging for future transport or storage.
2.2 Stand Assembly
The Elo 2201L monitor typically comes with a pre-attached stand. If the stand requires assembly, refer to the quick installation guide included in the box. Ensure the stand is securely attached to provide stable support for the monitor.
2.3 Connecting Cables
- Power Connection: Connect the power adapter to the monitor's power input port, then plug the power cord into the adapter and a suitable power outlet.
- Video Connection: Connect one end of the DVI or VGA cable to the corresponding port on the monitor and the other end to your computer's video output port.
- USB Touch Connection: For touch functionality, connect the supplied USB cable from the monitor's USB upstream port to an available USB port on your computer.
- Audio Connection (Optional): If using the built-in speakers, connect an audio cable from your computer's audio output to the monitor's audio input port.
Image 2.1: Angled view of the Elo 2201L 22-inch IntelliTouch Touchscreen Monitor. This image shows the monitor from a side angle, highlighting its slim profile and the integrated stand.
2.4 Driver Installation
For optimal touch performance, especially with older operating systems, it may be necessary to install the Elo touch drivers. These drivers can typically be downloaded from the official Elo website. Follow the on-screen instructions during installation.
3. Operating Instructions
3.1 Powering On/Off
Press the power button located on the front or side of the monitor to turn it on or off. The power indicator light will illuminate when the monitor is active.
3.2 Basic Touchscreen Operation
- Single Touch: Tap the screen with your finger to select items or activate functions, similar to a mouse click.
- Drag: Touch and hold an item, then slide your finger across the screen to move it.
- Right-Click: Depending on your operating system and driver settings, a long press may simulate a right-click. Refer to your operating system's touch settings for customization.
3.3 On-Screen Display (OSD) Menu
The OSD menu allows you to adjust various display settings. Access the OSD menu using the physical buttons on the monitor bezel. Common adjustable settings include:
- Brightness/Contrast: Adjust the overall luminance and difference between light and dark areas.
- Input Source: Select between DVI and VGA video inputs.
- Color Settings: Fine-tune color temperature and individual RGB levels.
- Audio: Adjust volume for built-in speakers.
4. Maintenance
4.1 Cleaning the Screen
To clean the touchscreen, power off the monitor and gently wipe the screen with a soft, lint-free cloth dampened with a non-abrasive, ammonia-free glass cleaner. Avoid spraying cleaner directly onto the screen.
4.2 Cleaning the Casing
Wipe the monitor casing with a soft, damp cloth. Do not use harsh chemicals or abrasive materials, as these can damage the finish.
4.3 Storage
If storing the monitor for an extended period, disconnect all cables, power off the unit, and place it back in its original packaging in a dry, temperature-controlled environment.
5. Troubleshooting
5.1 No Power
- Ensure the power cord is securely connected to both the monitor and the power outlet.
- Verify the power outlet is functional by plugging in another device.
- Check the power adapter for any damage.
5.2 No Display
- Confirm the video cable (DVI or VGA) is securely connected to both the monitor and the computer.
- Ensure the correct input source is selected via the OSD menu.
- Test the monitor with another computer or video source if possible.
5.3 Touch Not Responding
- Verify the USB touch cable is securely connected to both the monitor and the computer.
- Ensure the touch drivers are correctly installed and updated.
- Restart your computer.
- Calibrate the touchscreen through your operating system's settings or the Elo touch utility.
5.4 Image Quality Issues
- Adjust brightness, contrast, and color settings through the OSD menu.
- Ensure your computer's display resolution is set to the monitor's native resolution (1024 x 768).
- Check for any physical damage to the video cable or ports.
6. Specifications
| Feature | Description |
|---|---|
| Model Number | E107766 |
| Screen Size | 22 Inches |
| Resolution | FHD 1080p (Note: Product title indicates 1024x768, please verify native resolution for optimal display) |
| Aspect Ratio | 16:9 |
| Touch Technology | IntelliTouch |
| Connectivity | USB (for touch), DVI, VGA |
| Audio | Built-in speakers |
| Backlighting | LED |
| Product Dimensions | 26.5 x 10.3 x 19.1 inches |
| Weight | 16.48 Pounds |
| Manufacturer | Elo Touch Solutions, Inc. |
7. Warranty Information
The Elo 2201L Touchscreen Monitor comes with a three-year standard warranty. This warranty covers defects in materials and workmanship under normal use. For detailed terms, conditions, and limitations of the warranty, please refer to the warranty card included with your product or visit the official Elo website.
8. Support
For further assistance, technical support, driver downloads, or frequently asked questions, please visit the official Elo Touch Solutions website. You can typically find contact information for customer service and support resources there.
Website: www.elotouch.com
