Miele Original Pipework Cleaner for Coffee Machines

1. Product Overview

The Miele Original Pipework Cleaner is specifically designed for the thorough cleaning of milk pipework in Miele coffee machines, particularly models such as the CVA 5060/5065. This product helps to remove milk residues and maintain optimal hygiene and performance of your coffee machine's milk system. Each package contains 100 individual sachets of the cleaning agent.

Image: Front view of the Miele Original Pipework Cleaner box, showing the product name and a coffee machine with milk beverages.

2. Safety Information

WARNING: This product contains Calcium Carbonate and can cause serious eye irritation. Always handle with care and follow safety precautions.

• Keep out of reach of children.
• Avoid contact with eyes. In case of contact, rinse immediately with plenty of water for several minutes and seek medical advice.
• Do not ingest. If swallowed, seek medical attention immediately and show this container or label.
• Store in a cool, dry place, away from direct sunlight and heat.
• Do not mix with other cleaning agents.

For detailed safety data, refer to the product's Material Safety Data Sheet (MSDS).

3. Usage Instructions

For Miele Coffee Machines (e.g., CVA 5060/5065)

Regular cleaning of the milk pipework is essential to ensure optimal performance and hygiene of your Miele coffee machine. Follow your machine's specific cleaning program as outlined in its user manual.

1. Ensure your Miele coffee machine is switched on and ready for the cleaning process.
2. Locate the milk pipework cleaning program in your machine's menu.
3. When prompted by the machine, dissolve one sachet of Miele Original Pipework Cleaner in approximately 0.5 liters (17 fl oz) of warm water. Stir until fully dissolved.
4. Place the milk pipework into the solution as instructed by your coffee machine's display.
5. Initiate the cleaning program. The machine will draw the cleaning solution through the milk system.
6. After the cleaning cycle, rinse the milk pipework thoroughly with fresh water as prompted by the machine to remove any residual cleaning solution.
7. Dispose of the used solution responsibly.

Note: Always refer to your specific Miele coffee machine's instruction manual for detailed steps on running the milk pipework cleaning program.

Image: Individual sachets of Miele Pipework Cleaner displayed outside the product box.

4. Troubleshooting

If the milk pipework cleaning process does not yield satisfactory results, consider the following:

• Insufficient Cleaning: Ensure the cleaning solution was properly prepared and fully dissolved. Verify that the milk pipework was correctly inserted into the solution and the machine's cleaning cycle was completed without interruption.
• Persistent Residue: If stubborn milk residue remains, repeat the cleaning process. For heavily soiled pipework, a manual cleaning with a brush designed for milk tubes may be necessary before using the chemical cleaner.
• Machine Error: If your coffee machine displays an error message during the cleaning process, consult your coffee machine's user manual for specific error codes and troubleshooting steps.

5. Specifications

6. Warranty and Support

For information regarding product warranty, returns, or technical support, please contact Miele customer service or visit the official Miele website.

You can find more information and contact details on the Miele Store on Amazon.