1. Product Overview
The Kohler K-7265-AF Clearflo Brass Toe-Tap Bathtub Drain is designed for efficient water drainage in bathtubs. It features durable brass construction and a Vibrant French Gold finish, engineered to resist corrosion and tarnishing. The toe-tap actuation mechanism eliminates internal linkages, which helps reduce potential clogging. This drain system is suitable for both above-the-floor and through-the-floor installations, and its copper corrugated neck simplifies fit-up on various bath slopes.
Image 1.1: The Kohler K-7265-AF Clearflo Brass Toe-Tap Bathtub Drain, showcasing its brass piping, corrugated overflow tube, and Vibrant French Gold finish on the toe-tap stopper and overflow cover.
2. Safety Information
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.
- Always wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- Ensure all plumbing connections are secure and watertight to prevent leaks.
- Consult local plumbing codes and regulations before beginning installation to ensure compliance.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).
- Do not overtighten components, as this may cause damage.
3. Package Contents
Verify that all components are present before beginning installation:
- Kohler K-7265-AF Clearflo Brass Toe Tap Bath Drain assembly
- Installation hardware (gaskets, nuts, etc.)
4. Setup and Installation
This drain system offers flexibility for installation either above or through the floor. The copper corrugated neck is designed to facilitate easy adjustment and fit on various bathtub slopes.
4.1 Tools Required (Not Included)
- Adjustable wrench
- Screwdriver
- Plumber's putty or silicone sealant
- Tape measure
- Pipe cutters (if modifications to piping are necessary)
4.2 Installation Steps
- Prepare the Bathtub: Ensure the bathtub drain and overflow openings are clean and free of debris.
- Assemble Overflow: Attach the overflow cover to the corrugated overflow tube. Apply plumber's putty or sealant around the overflow opening on the bathtub. Insert the overflow assembly through the bathtub's overflow hole.
- Assemble Drain Shoe: Apply plumber's putty or sealant around the drain opening on the bathtub. Insert the drain shoe assembly (with the toe-tap stopper) through the bathtub's drain hole.
- Connect Drain Components: From underneath the bathtub, connect the overflow tube and the drain shoe using the provided brass piping and T-fitting. Ensure all connections are hand-tightened, then use an adjustable wrench to secure them firmly, but do not overtighten.
- Connect to House Plumbing: Connect the assembled drain system to your existing house plumbing. Ensure all connections are sealed properly according to local plumbing codes.
- Test for Leaks: Fill the bathtub with water and allow it to drain. Carefully inspect all connections for any signs of leakage. Tighten connections as necessary.
5. Operation
The K-7265-AF drain features a simple toe-tap mechanism for opening and closing the drain stopper.
- To Close the Drain: Gently press down on the center of the drain stopper with your foot or finger until it clicks into the closed position. This will retain water in the bathtub.
- To Open the Drain: Gently press down on the center of the drain stopper again. It will release and allow water to drain from the bathtub.
6. Maintenance
Regular cleaning and maintenance will help preserve the finish and functionality of your Kohler drain.
- Cleaning the Finish: Clean the Vibrant French Gold finish with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish. Kohler finishes are designed to resist corrosion and tarnishing, exceeding industry durability standards.
- Cleaning the Stopper: Periodically remove the toe-tap stopper (if designed for easy removal) and clean any hair or debris that may have accumulated underneath.
- Checking for Leaks: Occasionally inspect the drain connections for any signs of leaks, especially after heavy use.
7. Troubleshooting
If you encounter issues with your drain, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Drain leaks | Loose connections, improperly applied sealant, damaged gasket. | Tighten connections, reapply plumber's putty/sealant, replace gasket if damaged. |
| Stopper does not hold water | Debris under stopper, worn stopper seal, faulty toe-tap mechanism. | Clean debris, inspect and replace stopper seal, contact support if mechanism is faulty. |
| Slow drainage | Partial clog in drain pipe or stopper area. | Remove stopper and clear debris. Use a plumbing snake or drain cleaner if clog is further down. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | K-7265-AF |
| Brand | Kohler |
| Material | Brass |
| Finish Type | Vibrant French Gold |
| Drain Size | 1.5 inches |
| Item Weight | 6.5 pounds |
| Product Dimensions | 24.75 x 10.5 x 3.25 inches |
| Installation Method | Above The Floor, Through The Floor |
| Special Feature | Corrugated overflow neck |
| UPC | 650531909268 |
9. Warranty Information
This Kohler K-7265-AF Clearflo Brass Toe-Tap Bathtub Drain is covered by a one-year limited warranty. For detailed terms and conditions, please refer to the official Kohler warranty documentation or visit the Kohler website.
10. Support
For further assistance, technical support, or to inquire about replacement parts, please contact Kohler customer service. You can also visit the official Kohler website for additional resources and product information.
Visit the KOHLER Store on Amazon.
