Eurotime 56863

EUROTIME 50 cm Radio-Controlled Wall Clock Model 56863

Instruction Manual

Brand: Eurotime | Model: 56863

1. Introduction

Thank you for choosing the EUROTIME 50 cm Radio-Controlled Wall Clock, Model 56863. This clock is designed for precise timekeeping, automatically synchronizing with a radio time signal to ensure accuracy and effortless adjustment for daylight saving time. Its robust aluminum casing and real glass dial make it suitable for various indoor environments, including large spaces, lobbies, or offices.

2. Safety Information

  • Battery Safety: Use only the specified battery type (1 x AA). Do not mix old and new batteries, or different types of batteries. Remove exhausted batteries promptly. Dispose of batteries according to local regulations.
  • Mounting: Ensure the clock is securely mounted on a stable wall surface using appropriate hardware for its weight and size. Improper mounting can lead to injury or damage.
  • Indoor Use Only: This clock is designed for indoor use. Exposure to outdoor elements, extreme temperatures, or high humidity may damage the clock.
  • Glass Handling: The clock features a real glass dial. Handle with care to prevent breakage and injury.

3. Package Contents

  • 1 x EUROTIME 50 cm Radio-Controlled Wall Clock (Model 56863)
  • 1 x Instruction Manual

4. Product Overview

Familiarize yourself with the components of your EUROTIME wall clock.

Front view of the EUROTIME 50 cm radio-controlled wall clock, showing the white dial with black numbers, black hour and minute hands, and a red second hand. The radio-controlled symbol is visible below the center.

Figure 4.1: Front View of the Clock
This image displays the clock's face, featuring a clear white dial with large, easy-to-read black Arabic numerals from 1 to 12. The hour and minute hands are black, and the second hand is red. A "RADIO CONTROLLED" symbol is located at the 6 o'clock position.

Rear view of the EUROTIME 50 cm radio-controlled wall clock, showing the battery compartment and mounting hook.

Figure 4.2: Rear View of the Clock
This image shows the back of the clock, highlighting the central mechanism housing where the battery is inserted. A keyhole-style mounting hook is visible at the top for wall installation. Three rubber feet are also present for stability when placed against a surface.

Side view of the EUROTIME 50 cm radio-controlled wall clock with dimensions indicated. The clock has a depth of 6.5 cm and a diameter of 50 cm.

Figure 4.3: Clock Dimensions
This image illustrates the overall dimensions of the clock. It has a diameter of 50 cm and a depth of 6.5 cm, providing a clear visual reference for its size.

5. Setup

  1. Insert Battery: Open the battery compartment cover on the back of the clock. Insert one (1) AA battery, ensuring the polarity (+/-) matches the indicators inside the compartment. Close the cover securely.
  2. Initial Synchronization: After inserting the battery, the clock hands will automatically move to the 12 o'clock position. The clock will then begin searching for the radio time signal (DCF77 in Europe). This process can take several minutes, or up to an hour, depending on signal strength.
  3. Signal Reception: For optimal signal reception, place the clock near a window and away from electronic devices that may cause interference. Avoid placing it in basements or areas with heavy concrete walls.
  4. Time Setting: Once the signal is successfully received, the clock will automatically set itself to the correct local time, including adjusting for daylight saving time (summer/winter time) changes.
  5. Mounting: Once the time is set, securely hang the clock on a wall using the integrated mounting hook on the back. Ensure the wall plug and screw (not included) are appropriate for the clock's weight and your wall type.

6. Operating the Clock

The EUROTIME radio-controlled wall clock operates automatically once set up.

  • Automatic Time Adjustment: The clock continuously receives the radio time signal, ensuring precise timekeeping.
  • Daylight Saving Time (DST) Adjustment: The clock will automatically adjust for summer and winter time changes, eliminating the need for manual intervention.
  • Signal Loss: If the radio signal is temporarily lost, the clock will continue to run on its internal quartz movement. It will attempt to resynchronize with the radio signal periodically.

7. Maintenance

  • Cleaning: To clean the clock, gently wipe the casing and glass with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or internal components.
  • Battery Replacement: Replace the AA battery annually or when the clock hands stop moving or appear to lose accuracy. Always replace with a fresh, high-quality AA battery.
  • Environmental Conditions: Keep the clock away from direct sunlight, extreme temperatures, and high humidity to ensure longevity and accurate operation.

8. Troubleshooting

ProblemPossible CauseSolution
Clock does not set time or runs incorrectly.
  • Exhausted or incorrectly inserted battery.
  • Poor radio signal reception.
  • Interference from other electronic devices.
  • Replace the AA battery with a new one, ensuring correct polarity.
  • Move the clock to a location with better signal reception (e.g., near a window, away from metal objects).
  • Ensure the clock is not too close to TVs, computers, or other electronic devices.
Hands are stuck or not moving.
  • Battery is dead.
  • Mechanical obstruction.
  • Replace the battery.
  • Gently check if anything is obstructing the hands. If not, contact support.

9. Specifications

  • Model: 56863
  • Brand: Eurotime
  • Type: Radio-Controlled Wall Clock
  • Dimensions: 50 cm (Diameter) x 6.5 cm (Depth)
  • Weight: Approximately 9.07 g (Note: This weight appears unusually low and may be a typographical error in source data. Actual weight is likely higher.)
  • Power Source: 1 x AA Battery (not included)
  • Casing Material: Aluminum
  • Dial Material: Real Glass
  • Display Type: Analog
  • Special Features: Automatic time synchronization, automatic Daylight Saving Time (DST) adjustment.
  • Usage: Indoor only

10. Warranty and Support

For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. If you encounter any issues not covered in the troubleshooting section, or require further assistance, please contact your retailer or the Eurotime customer support directly.

Related Documents - 56863

Preview MOBATIME EuroTime Center ETC Master Clock System - Technical Overview
Explore the MOBATIME EuroTime Center ETC master clock series, a versatile solution for time distribution systems. This document details its features, technical specifications, interface options, and applications for synchronized time management.
Preview EuroTime Center ETC: Reloj Maestro Versátil MOBATIME para Sistemas de Servicio de Tiempo
Ficha técnica detallada del EuroTime Center ETC de MOBATIME. Características, especificaciones técnicas, interfaces y aplicaciones de este reloj maestro para sincronización horaria y automatización de edificios.
Preview MOBATIME EuroTime Center ETC Master Clock Series - Technical Specifications and Features
Explore the MOBATIME EuroTime Center ETC, a versatile master clock for time service systems. This document details its technical specifications, interfaces, clock line outputs, time source, control capabilities, and applications for synchronized time distribution.
Preview MOBATIME EuroTime Center ETC : Système d'horloge mère - Caractéristiques et Spécifications
Découvrez le système d'horloge mère polyvalent MOBATIME EuroTime Center ETC. Contrôlez les horloges secondaires, synchronisez le temps via DCF/GNSS et gérez les fonctions du bâtiment. Spécifications techniques détaillées.
Preview LUMIVERT 5683 CH Double Cylinder Bar Vanity - Specification Sheet
Detailed specification sheet for the LUMIVERT 5683 CH Double Cylinder Bar Vanity. Features include 3-light E26 base, 60W max, UL certification for damp locations, and satin opal/clear glass diffusers. Includes alternative model and LED lamping details.
Preview Harbor Freight Parking Lot Sale - Deals on Tools & Equipment
Shop the Harbor Freight Parking Lot Sale for incredible discounts on a wide range of tools, equipment, and accessories. Limited-time offers available in-store from October 6-12.