Introduction
The Pelican 0915 Memory Card Case is designed to provide secure and water-resistant storage for your valuable memory cards. This case features a tough, polycarbonate resin construction and a water-resistant seal, ensuring protection against environmental elements. The interior is equipped with a removable insert liner that securely holds various types of memory cards.
This manual provides essential information on the proper setup, operation, maintenance, and specifications of your Pelican 0915 Memory Card Case to ensure optimal performance and longevity.
Product Features
- Water-resistant seal (IPx4): Provides protection against splashes and light rain.
- Capacity: Stores up to 12 SD cards, 6 mini SD cards, and 6 micro SD cards.
- Shock Absorption: The insert liner absorbs shock and protects memory cards from impact.
- Durable Construction: Made of tough Polycarbonate resin for long-lasting use.
Setup
The Pelican 0915 Memory Card Case comes pre-assembled and ready for use. No initial assembly is required. Simply open the case to access the memory card slots.
Image: The Pelican 0915 case opened, displaying its foam insert with dedicated slots for various memory card types, some with example cards.
To begin using the case:
- Locate the latch on the front of the case.
- Gently lift the latch to unsecure the lid.
- Open the lid to reveal the foam insert with card slots.
Operating Instructions
Proper operation ensures the protection of your memory cards.
Image: The Pelican 0915 Memory Card Case in its closed state, highlighting its compact and durable design.
- Inserting Memory Cards: Carefully align your SD, mini SD, or micro SD cards with their respective slots in the foam insert. Gently press the cards into the slots until they are snug and secure. Ensure the cards are fully seated to prevent movement.
- Closing the Case: Once all cards are inserted, close the lid firmly. Press down on the latch until it clicks into place, indicating a secure seal. This ensures the water-resistant properties of the case are maintained.
- Removing Memory Cards: To remove a card, open the case and gently pull the card from its slot. Avoid forcing cards, as this may damage the card or the foam insert.
Important: Always ensure the case is properly closed and latched when not in use, especially in environments where water or dust exposure is possible.
Maintenance
To maintain the integrity and performance of your Pelican 0915 Memory Card Case, follow these simple maintenance guidelines:
- Cleaning the Exterior: Wipe the exterior of the case with a damp cloth to remove dirt or debris. For stubborn marks, a mild soap solution can be used, followed by rinsing with clean water and air drying.
- Cleaning the Interior: The foam insert can be gently wiped with a dry or slightly damp cloth. Ensure the foam is completely dry before reinserting memory cards.
- Checking the Seal: Periodically inspect the rubber seal around the rim of the case for any signs of wear, cracks, or damage. A compromised seal can affect the water resistance. If damage is noted, contact Pelican support for assistance.
- Storage: Store the case in a cool, dry place away from direct sunlight when not in use.
Troubleshooting
If you encounter any issues with your Pelican 0915 Memory Card Case, consider the following:
- Cards not fitting securely: Ensure you are using the correct slot for each card type (SD, mini SD, micro SD). The foam is designed for a snug fit. Avoid forcing cards.
- Case not closing properly: Check for any obstructions along the sealing edge or within the latch mechanism. Ensure the foam insert is correctly seated.
- Suspected water leakage: Verify that the case was closed and latched correctly. Inspect the rubber seal for damage or debris. If the seal is damaged, the water-resistant properties may be compromised.
For persistent issues or concerns not addressed here, please refer to the Support section.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 5.55 x 3.27 x 0.85 inches (14.1 x 8.3 x 2.2 cm) |
| Item Weight | 3.53 ounces (100 grams) |
| Item Model Number | 0910-015-110 |
| Brand | Pelican |
| Color | Black |
| Compatible Devices | Cameras (Memory Cards) |
| Form Factor | Case |
| Shell Type | Hard |
| Water Resistance | IPx4 (Water resistant seal) |
| Storage Capacity | 12 SD cards, 6 mini SD cards, 6 micro SD cards |
Warranty Information
Pelican Products, Inc. offers a Lifetime Guarantee on its cases. This guarantee covers breakage or defects in workmanship. For specific details regarding the warranty terms, conditions, and how to make a claim, please refer to the official Pelican website or contact their customer support directly.
Proof of purchase may be required for warranty service.
Support
For further assistance, technical support, or inquiries regarding your Pelican 0915 Memory Card Case, please visit the official Pelican website or contact their customer service department.
Pelican Official Website: www.pelican.com
Contact information, including phone numbers and email addresses, can typically be found in the 'Contact Us' or 'Support' section of their website.
