1. Introduction
Thank you for choosing the Leitmotiv Vino Glass Pendant Lamp, Extra Large. This elegant lighting fixture is designed to be a stunning focal point in any room, reflecting light beautifully through its numerous glass components. This manual provides essential information for safe installation, operation, and maintenance of your new lamp. Please read it thoroughly before beginning installation or use.
2. Safety Information
WARNING: Risk of electric shock. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
- Installation should be performed by a qualified electrician in accordance with all local electrical codes.
- Do not exceed the maximum wattage of 40 watts per E12 bulb. The fixture is designed for a total maximum of 160 watts (4 x 40W bulbs).
- Handle glass components with care. Glass can break and cause injury.
- Ensure the mounting surface can support the weight of the fixture (approximately 39.8 pounds).
- This product is for indoor use only.
- Keep packaging materials away from children.
3. Package Contents
Carefully unpack all components and inspect for any damage. Retain packaging for future transport or returns. The package should contain:
- Stainless Steel Frame with Spikes
- Suspension Chains
- Mounting Hardware (ceiling plate, screws, wire nuts)
- Approximately 83 Wine Glasses (additional spare glasses may be included)
- Instruction Manual
Note: Light bulbs (E12 base, max 40W) are not included and must be purchased separately.
4. Setup and Installation
4.1 Before You Begin
- Turn off power at the circuit breaker before starting installation.
- Gather necessary tools: screwdriver, wire strippers, pliers, ladder, safety glasses.
- Ensure the ceiling junction box is securely mounted and capable of supporting the fixture's weight.
4.2 Assembly Steps
- Mount the Ceiling Plate: Secure the provided ceiling plate to your electrical junction box using the screws. Ensure it is firmly attached.
- Connect Electrical Wiring: With power off, connect the fixture's wires to your household wiring. Connect the black wire (live) to the black wire, the white wire (neutral) to the white wire, and the ground wire to the ground wire. Secure connections with wire nuts. Carefully tuck wires into the junction box.
- Attach Suspension Chains: Connect the suspension chains to the ceiling plate and to the top ring of the stainless steel frame. Adjust chain length to achieve desired hanging height.
- Install Light Bulbs: Screw four E12 base bulbs (max 40W each) into the sockets located within the center of the stainless steel frame.
- Place Wine Glasses: Carefully hang each wine glass upside down onto the individual spikes on the stainless steel frame. Start from the top row and work your way down, ensuring each glass is securely seated. There are approximately 83 designated spots for glasses.
- Secure Fixture: Once all connections are made and glasses are in place, carefully raise the fixture and secure it to the ceiling plate.
Image: Fully assembled Leitmotiv Vino Glass Pendant Lamp, Extra Large, showcasing the stainless steel frame with numerous wine glasses suspended from it, and the chains for ceiling mounting.
5. Operation
Once installed, the Vino Glass Pendant Lamp can be operated using a standard wall switch connected to the fixture's circuit. Some models may feature a pull chain switch for direct control. Simply toggle the switch to turn the lamp on or off.
6. Maintenance
6.1 Cleaning
- Always turn off and disconnect power before cleaning.
- For the stainless steel frame, wipe with a soft, dry cloth. For stubborn marks, use a mild, non-abrasive cleaner specifically designed for stainless steel.
- For the glass components, carefully remove each glass and wash by hand with warm, soapy water. Rinse thoroughly and dry with a lint-free cloth to prevent water spots. Reattach only when completely dry.
- Avoid using harsh chemicals or abrasive materials, as they can damage the finish or glass.
6.2 Bulb Replacement
- Ensure the lamp is off and cool before attempting to replace bulbs.
- Unscrew the old E12 bulb and screw in a new E12 bulb, ensuring it does not exceed 40 watts.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. | No power, loose wiring, faulty bulb, faulty switch. | Check circuit breaker. Ensure all wire connections are secure. Replace bulb. Test wall switch. Consult a qualified electrician if issues persist. |
| Flickering lights. | Loose bulb, incorrect bulb type, unstable power supply. | Tighten bulbs. Ensure bulbs are E12 base and within wattage limits. Consult electrician for power supply issues. |
| Broken glass components upon arrival. | Shipping damage. | Contact customer support immediately for replacement parts. Do not attempt to use damaged glass. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Leitmotiv |
| Model Number | LM567-110V |
| Dimensions (L x W x H) | 32 x 24 x 64 inches |
| Item Weight | 39.8 pounds |
| Material | Stainless Steel, Glass |
| Bulb Base | E12 |
| Max Wattage (per bulb) | 40 Watts |
| Total Max Wattage | 160 Watts (4 bulbs) |
| Voltage | 120 Volts |
| Number of Light Sources | 4 |
| Installation Type | Semi Flush Mount, Ceiling Mount |
| Indoor/Outdoor Usage | Indoor |
| Control Method | Touch (via wall switch) / Pull Chain |
9. Warranty and Support
This Leitmotiv product comes with a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, replacement parts, or any inquiries regarding your Vino Glass Pendant Lamp, please contact Leitmotiv customer service. Contact information can typically be found on the product packaging or the official Leitmotiv website.