Product Overview
The Kendal Lighting HWS210-SV is an indoor wall sconce designed to provide both up and down lighting. It features a silver finish and a die-cast aluminum housing, making it suitable for various indoor settings. The fixture utilizes a single 100w T3 R7S 78mm 120v Halogen bulb and includes a concave lens on top to project a decorative column of light upwards.
Image of the HWS210-SV wall sconce mounted on a wall, illustrating its upward and downward light emission.
Setup and Installation
Important Safety Information: Before beginning installation, ensure the power supply to the circuit is turned off at the circuit breaker or fuse box. Consult a qualified electrician if you are unsure about any part of the installation process. All wiring connections must comply with local electrical codes.
- Prepare Wiring: Turn off power at the main circuit breaker. Ensure the wall box is properly secured and has the necessary wiring (hot, neutral, ground).
- Mount Mounting Plate: Attach the fixture's mounting plate to the wall junction box using the provided screws. Ensure it is securely fastened.
- Make Electrical Connections: Connect the fixture's wires to the corresponding house wires: black to black (hot), white to white (neutral), and green or bare copper to green or bare copper (ground). Secure connections with wire nuts.
- Secure Fixture: Carefully tuck the wires into the junction box. Align the fixture body with the mounting plate and secure it using the provided screws.
- Install Light Bulb: Insert one 100w T3 R7S 78mm 120v Halogen bulb into the designated socket. Handle halogen bulbs with a clean cloth to avoid oil residue.
- Restore Power: Once the fixture is securely installed and the bulb is in place, restore power at the main circuit breaker.
Operating Instructions
The HWS210-SV wall sconce operates by a standard wall switch connected to the circuit. Ensure the correct bulb type is installed for optimal performance and safety.
- Power On/Off: Use the wall switch connected to the fixture's circuit to turn the light on or off.
- Bulb Type: This fixture is designed for one 100w T3 R7S 78mm 120v Halogen bulb. Using a different bulb type or wattage may damage the fixture or pose a fire hazard.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your wall sconce.
- Cleaning: To clean the fixture, first turn off the power. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Bulb Replacement: Before replacing the bulb, turn off the power at the circuit breaker and allow the bulb to cool completely. Carefully remove the old bulb and insert a new 100w T3 R7S 78mm 120v Halogen bulb. Avoid touching the new halogen bulb directly with bare hands; use a clean cloth or gloves.
Troubleshooting
If you encounter issues with your HWS210-SV wall sconce, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Bulb is loose or burnt out Faulty wiring connection | Check circuit breaker and wall switch Tighten or replace bulb Verify all wire connections are secure (ensure power is off before checking) |
| Light flickers | Loose bulb Incorrect bulb type Loose wiring connection | Tighten bulb Ensure correct bulb type (100w T3 R7S 78mm 120v Halogen) Check wiring connections (ensure power is off before checking) |
| Fixture gets too hot | Incorrect bulb wattage | Ensure bulb wattage does not exceed 100w. Use only the specified bulb type. |
Specifications
- Model: HWS210-SV
- Brand: Kendal Lighting
- Finish: Silver
- Light Bulb: (1) 100w T3 R7S 78mm 120v Halogen
- Number of Lights: 1
- Housing: Die-cast aluminum
- UPC: 665807004516
- First Available: September 5, 2009
Warranty & Support
Kendal Lighting products are manufactured to high-quality standards. For specific warranty details, please refer to the documentation included with your purchase or visit the official Kendal Lighting website. Keep your proof of purchase for warranty claims.
For technical support or inquiries regarding your HWS210-SV wall sconce, please contact Kendal Lighting customer service. Contact information can typically be found on the manufacturer's website or on the product packaging.
