Introduction
The DAB TU-FR-8200 Long Handled Dust Pan is designed for efficient debris collection with minimal physical strain. Its ergonomic height and lightweight tin construction make it suitable for various cleaning tasks in both home and industrial environments. This manual provides essential information for the proper use and care of your dust pan.
Image: The DAB 34-inch Long Handled Dust Pan, showcasing its ergonomic handle and wide pan for effective debris collection.
Setup
The DAB TU-FR-8200 Long Handled Dust Pan comes pre-assembled and is ready for immediate use upon unboxing. No assembly steps are required.
- Remove the dust pan from its packaging.
- Inspect the dust pan for any shipping damage. If damage is found, contact customer support.
- The dust pan is now ready for operation.
Operating Instructions
Follow these steps for effective use of your long handled dust pan:
- Positioning: Place the flat front edge of the dust pan firmly against the floor or surface where debris needs to be collected. Ensure the slight ridge on the front plate is flush with the ground to prevent debris from passing underneath.
- Sweeping: Using a broom or brush, sweep debris directly onto the dust pan. The 34-inch handle height allows for sweeping without excessive bending.
- Collection: The high sides and elevated back of the pan are designed to contain collected debris securely, preventing spills during transport.
- Emptying: Once debris is collected, transport the dust pan to a waste receptacle. Tilt the pan to easily empty its contents.
Maintenance
Proper maintenance ensures the longevity and continued efficiency of your dust pan:
- Cleaning: After each use, especially when collecting wet or sticky debris, wipe the dust pan clean with a damp cloth. For stubborn residue, a mild soap solution can be used, followed by thorough rinsing and drying.
- Drying: Ensure the dust pan is completely dry before storage to prevent rust, as it is constructed from tin.
- Storage: Store the dust pan in a dry place. Its long handle allows for convenient hanging storage, saving floor space.
- Inspection: Periodically inspect the pan for any signs of damage or wear.
Troubleshooting
If you encounter issues with your dust pan, consider the following:
- Debris not sweeping into pan cleanly:
- Ensure the front edge of the dust pan is flush with the floor. Adjust its angle if necessary.
- Check for any obstructions or damage to the front plate that might prevent a tight seal.
- Debris spilling out during transport:
- Avoid overfilling the dust pan.
- Transport the pan carefully, keeping it level to utilize the high sides and back for containment.
- Rust formation:
- Ensure the dust pan is thoroughly dried after cleaning and stored in a dry environment.
- Minor surface rust can sometimes be removed with fine steel wool, followed by drying and applying a thin layer of protective oil if desired.
Specifications
| Model Number | TU-FR-8200 |
| Brand | DAB |
| Overall Height | Approximately 34 inches (86.36 cm) |
| Pan Width (Front) | 12.5 inches (31.75 cm) |
| Pan Height (Back) | 5.75 inches (14.61 cm) |
| Material | Tin (Pan), Wood (Handle) |
| Item Weight | 1 lb. 6.2 oz. (622.7 grams) / 16 ounces |
| Grip Type | Ergonomic |
| UPC | 886461082003 |
Warranty Information
Specific warranty details for the DAB TU-FR-8200 Long Handled Dust Pan are not provided in the product information. Please refer to the retailer's return policy or contact the manufacturer, ToolUSA, for any warranty-related inquiries.
Customer Support
For further assistance or inquiries regarding your DAB Long Handled Dust Pan, please contact the manufacturer, ToolUSA. Contact information may be available on their official website or through the retailer where the product was purchased.
Note: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is a cleaning tool.
