1. Introduction
This manual provides essential information for the safe and effective use of your BM Premium LP-E10 Li-ion battery. Designed as a high-quality replacement, this battery ensures reliable power for your compatible Canon digital camera, allowing you to capture moments without interruption.
2. Product Specifications
- Battery Type: Li-ion
- Energy Storage Capacity: 1100mAh
- Voltage: 7.4 volts
- Watt-Hours (WH): 8.1Wh
- Chip: Fully decoded, displays remaining battery power on camera.
- Safety Features: Built-in multiple circuit protection (over-charging, short-circuit, high-temperature, surge protection), high-quality, fire-resistant construction.
- Memory Effect: Absolutely no memory effect, allowing charging at any time.
- Model Number: LPE10
- Item Weight: 1.7 ounces
- Product Dimensions: 6 x 5 x 5 inches
3. Compatibility
The BM Premium LP-E10 battery is compatible with the following Canon EOS Rebel and Kiss digital camera models:
- Canon EOS Rebel T3
- Canon EOS Rebel T5
- Canon EOS Rebel T6
- Canon EOS Rebel T7
- Canon EOS Rebel T100
- Canon Kiss X50
- Canon Kiss X70
- Canon EOS 1100D
- Canon EOS 1200D
- Canon EOS 1300D
- Canon EOS 1500D
- Canon EOS 2000D
- Canon EOS 3000D
- Canon EOS 4000D
Important Note: This battery is NOT compatible with Canon EOS Rebel models ending in "i" (e.g., T3i, T5i, T6i, T7i).
4. Setup and Installation
- Initial Charge: Before first use, fully charge the battery using a compatible Canon LP-E10 charger or a BM Premium charger. The battery is designed to work with original Canon chargers.
- Inserting the Battery:
- Turn off your camera.
- Open the battery compartment cover on your camera (usually located at the bottom).
- Insert the LP-E10 battery into the compartment, ensuring the contacts align correctly. Push until it clicks into place.
- Close the battery compartment cover securely.
- Removing the Battery:
- Turn off your camera.
- Open the battery compartment cover.
- Press the battery release lever (if present) and gently slide the battery out.
- Close the battery compartment cover.
5. Operating the Battery
Once installed, the BM Premium LP-E10 battery functions identically to your original Canon battery. The fully decoded chip ensures that your camera accurately displays the remaining battery life, allowing you to monitor power levels in real-time.
- Power On/Off: Use your camera's standard power button to turn it on or off.
- Battery Level Indicator: The remaining battery power will be displayed on your camera's LCD screen or viewfinder, just like with an original Canon battery.
- Charging: Recharge the battery when the camera indicates low power. The battery can be charged at any time without developing a "memory effect," ensuring maximum performance over its lifespan.
6. Maintenance and Care
- Storage: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, it is recommended to store them with a partial charge (around 50%).
- Cleaning: Keep battery contacts clean using a dry, soft cloth. Dirty contacts can interfere with proper operation and charging.
- Disposal: Do not dispose of batteries in fire or expose to excess heat. Recycle used batteries according to local regulations.
- Safety: Do not short-circuit, crush, puncture, or incinerate the battery. Avoid exposing it to water or moisture.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging | Dirty contacts, faulty charger, or deeply discharged battery. | Clean battery contacts. Try a different charger. If deeply discharged, it may take longer to initiate charging. |
| Camera not powering on | Battery not inserted correctly, battery fully discharged, or incompatible camera model. | Ensure battery is securely inserted. Charge the battery. Verify camera model compatibility (refer to Section 3). |
| Battery drains quickly | High power consumption features (e.g., live view, video recording, flash), or battery aging. | Reduce use of power-intensive features. Consider replacing the battery if it's old and performance has significantly degraded. |
8. Warranty and Support
The BM Premium LP-E10 battery comes with a one-year warranty. This warranty covers manufacturing defects and ensures 100% safety with built-in circuit protection.
For support or warranty claims, please contact BM Premium customer service through the retailer where the product was purchased.
