1. Product Overview
The TRAC Outdoors Anchor Winch Wireless Remote Kit provides unparalleled convenience for operating your TRAC Fisherman 25 or Pontoon 35 Electric Anchor Winch. This compact wireless remote allows you to control your anchor's deployment and retrieval from any location on your boat, eliminating the need to be at the winch itself. It includes a handy storage bracket for mounting at your helm or another preferred spot, offering the flexibility of a dash-mounted switch or a portable remote.
Image 1.1: The TRAC Outdoors Anchor Winch Wireless Remote Kit, featuring a compact design with anchor up/down, ON, and OFF buttons.
Key Features:
- Compact Key Fob Control: Easily fits in your hand or pocket.
- Wireless Operation: Allows push-button anchor operation from any location on the boat.
- Included Snap-in Case: Can be attached at the helm or other desired locations for convenient storage and access.
- Universal Fit Type: Designed for broad compatibility with specified TRAC anchor winches.
2. Setup and Installation
Before installing the wireless remote kit, ensure your TRAC Fisherman 25 or Pontoon 35 Electric Anchor Winch is powered off and disconnected from its power source. This kit typically involves replacing the existing control module within your anchor winch with the new wireless module.
Installation Steps:
- Prepare the Winch: Locate the control module compartment on your TRAC anchor winch. You may need to remove a cover to access it.
- Disconnect Old Module: Carefully disconnect the wiring from the existing control module. Note the position of each wire for correct re-connection.
- Install New Module: Connect the wiring from the winch to the new wireless remote module. Ensure all connections are secure and match the original configuration.
- Secure Module: Place the new module within the winch compartment. While some models may have matching bolt holes, others might require alternative securing methods, such as cable ties, to ensure the module is stable and protected.
- Reassemble Winch: Replace the cover of the winch compartment, ensuring it is properly sealed to protect the electronics from the elements.
- Mount Remote Bracket: Choose a convenient location on your boat, such as the helm, to mount the included snap-in storage bracket for the remote. Use appropriate fasteners (not always included) to secure the bracket.
- Power On and Test: Reconnect the anchor winch to its power source and perform a functional test of the remote control.
Image 2.1: An electric anchor winch mounted on the bow of a boat, similar to those compatible with the remote kit.
3. Operating Instructions
The TRAC Outdoors Anchor Winch Wireless Remote provides simple, intuitive control over your anchor winch.
Remote Control Functions:
- ON Button: Press this button to activate the remote and prepare the winch for operation.
- OFF Button: Press this button to deactivate the remote and prevent accidental winch operation.
- Anchor Up Button (Up Arrow with Anchor Symbol): Press and hold this button to retrieve the anchor. Release the button to stop retrieval.
- Anchor Down Button (Down Arrow with Anchor Symbol): Press and hold this button to deploy the anchor. Release the button to stop deployment.
For optimal performance, ensure the remote has a clear line of sight or is within reasonable range of the winch's receiver module. Always observe the anchor and winch during operation to prevent tangles or damage.
Image 3.1: The bow of a boat with an anchor ready for deployment, illustrating the operational context of the remote.
4. Maintenance
Proper maintenance ensures the longevity and reliable operation of your wireless remote kit.
General Care:
- Keep Dry: While designed for marine environments, avoid prolonged exposure to direct water immersion. Store the remote in its bracket or a dry location when not in use.
- Clean Remote: Periodically wipe the remote with a soft, damp cloth to remove dirt, salt, or grime. Do not use harsh chemicals or abrasive cleaners.
- Battery Replacement: The remote is powered by an internal battery. If the remote's range decreases or it becomes unresponsive, the battery may need replacement. Refer to the specific instructions provided with your remote for battery type and replacement procedure.
- Inspect Connections: Annually inspect the wiring connections to the wireless module inside the winch for corrosion or looseness. Ensure they are clean and secure.
5. Troubleshooting
If you encounter issues with your TRAC Outdoors Anchor Winch Wireless Remote Kit, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding / Winch not operating | Low or dead remote battery; Loose wiring connections; Winch power off; Remote out of range. | Replace remote battery; Check all wiring connections at the module and winch; Ensure winch has power; Move closer to the winch. |
| Intermittent operation | Weak remote battery; Interference; Loose connections; Faulty module. | Replace remote battery; Move away from sources of electrical interference; Check and secure all wiring; Contact customer support if issue persists. |
| Winch operates unexpectedly (without remote input) | Electrical interference; Faulty module. | Immediately disconnect power to the winch for safety. Check for strong electrical interference nearby. If the problem continues, the module may be faulty and require replacement. Contact customer support. |
| Remote buttons feel sticky or unresponsive | Dirt or debris under buttons. | Clean the remote surface and around the buttons with a soft, slightly damp cloth. Avoid forcing buttons. |
If troubleshooting steps do not resolve the issue, please contact TRAC Outdoors customer support for further assistance.
6. Specifications
| Manufacturer | TRAC Outdoor Products |
| Brand | Trac |
| Model Name | G2 Anchor Winch Wireless Remote Kit |
| Item Model Number | 69041 |
| Manufacturer Part Number | T10116 |
| Item Weight | 12.7 ounces |
| Product Dimensions | 4.8 x 1.8 x 10.3 inches |
| Color | Black |
| Special Features | Universal |
| Max Number of Supported Devices | 2 |
| Compatible Devices | TRAC Fisherman 25 & Pontoon 35 Electric Anchor Winches |
7. Warranty and Support
For specific warranty information regarding your TRAC Outdoors Anchor Winch Wireless Remote Kit, please refer to the documentation included with your purchase or visit the official TRAC Outdoors website. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.
Customer Support:
If you require technical assistance, have questions about installation, operation, or need to inquire about warranty claims, please contact TRAC Outdoors customer support directly. Contact information can usually be found on the product packaging or the manufacturer's official website.
Online Resources: For additional resources, FAQs, and product updates, visit the official TRAC Outdoors website. You may also find helpful videos or guides there.
