Trust Remo 17595

Trust Remo 2.0 PC Speakers User Manual

Model: Remo (17595)

Introduction

This manual provides essential information for the setup, operation, and maintenance of your Trust Remo 2.0 PC Speakers. Please read this guide thoroughly before using the product to ensure proper functionality and longevity.

Package Contents

Upon unboxing, please verify that all components listed below are present:

  • 2 Speakers with attached cables
  • User's Guide (this manual)
Trust Remo 2.0 PC Speakers packaging box

Image: The retail packaging for the Trust Remo 2.0 PC Speakers, showing the two speakers and key features.

Setup

The Trust Remo 2.0 PC Speakers are designed for easy plug-and-play setup. Follow these steps to connect your speakers to your computer or laptop:

  1. Connect the USB Power Cable: Locate the USB cable attached to one of the speakers. Plug this USB connector into an available USB port on your computer or laptop. This provides power to the speakers.
  2. Connect the 3.5mm Audio Jack: Locate the 3.5mm audio jack cable attached to the same speaker. Plug this audio jack into the headphone or audio output port on your computer or laptop. This transmits the audio signal to the speakers.
  3. Position the Speakers: Place the two speakers on either side of your monitor or laptop for optimal stereo sound. Ensure they are on a stable, flat surface.
Trust Remo 2.0 PC Speakers with USB and 3.5mm audio cables

Image: Close-up view of the USB power cable and 3.5mm audio jack, essential for connecting the speakers.

Trust Remo 2.0 PC Speakers set up next to a computer monitor

Image: The Trust Remo 2.0 PC Speakers positioned on a desk next to a computer monitor, demonstrating a typical setup.

Operating Instructions

Once connected, your Trust Remo 2.0 PC Speakers are ready for use. The main controls are located on the front of the right speaker.

Front view of Trust Remo 2.0 PC Speakers with volume knob and power button

Image: A clear front view of the Trust Remo 2.0 PC Speakers, highlighting the main control knob and power indicator.

  • Power On/Off: The large circular knob on the front of the right speaker serves as both the power switch and volume control. Turn the knob clockwise until you hear a click to power on the speakers. A blue LED indicator light will illuminate. To power off, turn the knob counter-clockwise until it clicks off.
  • Volume Control: After powering on, continue turning the knob clockwise to increase the volume and counter-clockwise to decrease it.
  • Audio Playback: Ensure your computer's audio output is directed to the connected speakers. Play any audio from your computer (music, videos, games) and the sound will be routed through the speakers.
Close-up of the volume control knob on Trust Remo 2.0 PC Speakers

Image: A detailed view of the speaker's front panel, emphasizing the large, easy-to-reach volume control knob and power button.

Maintenance

Proper care and maintenance will help extend the lifespan of your Trust Remo 2.0 PC Speakers.

  • Cleaning: Use a soft, dry cloth to wipe the exterior of the speakers. Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the finish or internal components.
  • Placement: Avoid placing the speakers in direct sunlight, near heat sources, or in areas with high humidity. Ensure adequate ventilation around the speakers.
  • Cable Care: Do not bend or crimp the cables excessively. Avoid placing heavy objects on the cables.

Troubleshooting

If you encounter issues with your Trust Remo 2.0 PC Speakers, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No sound from speakers
  • Speakers not powered on.
  • Volume too low.
  • Audio cables not properly connected.
  • Computer audio output settings incorrect.
  • Ensure the power knob is turned on and the blue LED is lit.
  • Increase the volume using the speaker knob and your computer's volume control.
  • Check that both the USB and 3.5mm audio cables are securely plugged in.
  • Verify that your computer's sound output is set to the correct device (e.g., "Speakers (Realtek High Definition Audio)" or similar).
Distorted or poor sound quality
  • Volume set too high.
  • Audio source quality is low.
  • Interference.
  • Reduce the volume on both the speakers and your computer.
  • Test with a different audio source or file.
  • Move speakers away from other electronic devices that may cause interference.
Only one speaker working
  • Loose audio connection.
  • Balance settings on computer.
  • Ensure the 3.5mm audio jack is fully inserted into the port.
  • Check your computer's sound settings for audio balance and ensure it is centered.

Specifications

FeatureDetail
Model NameRemo
Model Number17595
Speaker TypeSatellite
Audio Output ModeStereo
Surround Sound Channel Configuration2.0
Speaker Maximum Output Power16 Watts (8 Watt RMS)
Power SourceUSB
Connectivity TechnologyAuxiliary (3.5mm Jack), USB
Frequency Response50.2 Hz
Impedance4 Ohm
Product Dimensions (D x W x H)3.15"D x 3.15"W x 6.89"H
Item Weight1.32 pounds (600 Grams)
MaterialPlastic
ColorBlack
Compatible DevicesLaptop, PC
Control MethodButton (Volume Knob)
Special FeatureCompact design

Warranty and Support

Warranty Information

The Trust Remo 2.0 PC Speakers come with a Limited Warranty. Please refer to the warranty card included in your package or contact Trust customer support for specific terms and conditions regarding warranty coverage and duration.

Customer Support

For further assistance, technical support, or inquiries not covered in this manual, please visit the official Trust website or contact their customer service department. Contact details can typically be found on the manufacturer's website or on the product packaging.

Manufacturer: Trust

Related Documents - Remo 17595

Preview Trust Vigor 2.0 Speaker Set Quick Installation Guide
Quick installation guide for the Trust Vigor 2.0 speaker set, providing setup and connection instructions for PC and laptop users. Includes details on connecting via USB and audio jacks, and selecting the device in Windows.
Preview Trust TYTAN 2.1 Speaker Set Quick Installation Guide
Quick installation guide for the Trust TYTAN 2.1 Speaker Set, detailing setup, audio connections, power, wireless pairing, and ECO mode for Windows and Bluetooth devices.
Preview Trust 22948 GEMI Speaker Set with RGB LED Illumination - User Guide
Official user guide for the Trust 22948 GEMI Speaker Set, featuring USB power and RGB LED illumination. Learn how to connect and use your speakers.
Preview Trust Avora 2.1 Speaker Set Quick Installation Guide
Concise and SEO-optimized HTML guide for setting up the Trust Avora 2.1 Speaker Set, covering volume/bass controls, physical setup, audio/power connections, and Windows installation.
Preview Trust 2.1 Speaker Set Quick Installation Guide
Quick installation guide for the Trust 2.1 Speaker Set, detailing setup, audio connections, power on, and volume control. Includes information on Windows installation and ECO mode.
Preview Trust Arys 2.0 Speaker Set: Quick Installation Guide
Comprehensive quick installation guide for the Trust Arys 2.0 Speaker Set (14W, model 20179). Learn how to connect, power, and set up your speakers with your PC or other devices.