1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your BLANCO Actis/s Sink Faucet, Model 517594. Please read these instructions carefully before beginning installation or use, and retain them for future reference.
The BLANCO Actis/s sink faucet features an exclusive system design, ideal for integration with BLANCO SteelArt products like BLANCO CLARON and FLOW-IF. Installation requires a faucet hole with a diameter of 35 mm.
2. Product Features
The BLANCO Actis/s Sink Faucet is designed for durability and ease of use, incorporating several key features:
- Ceramic Cartridge: Ensures smooth and precise control of water flow and temperature.
- Flexible Connection Hoses: 450 mm long with 3/8 inch nuts for quick and secure installation.
- Patented Jet Regulator: Designed to minimize limescale buildup on the faucet head, maintaining optimal water flow.
- Reinforcing Plate: Enhances faucet stability, particularly when installed with stainless steel sinks.
- 360° Swivel Spout: Provides maximum flexibility and reach for various sink tasks.
Image 1: The BLANCO Actis/s Sink Faucet, Model 517594, in chrome finish.
Image 2: The BLANCO Actis/s Sink Faucet integrated into a modern kitchen sink setup.
3. Package Contents
Please verify that all components are present before beginning installation:
- 1 x BLANCO Actis/s Sink Faucet (Model 517594, Chrome)
- Mounting Set (includes flexible connection hoses, nuts, and reinforcing plate)
- User Manual (this document)
4. Installation Instructions
4.1. Safety Precautions
- Ensure the main water supply is turned off before starting installation.
- Wear appropriate personal protective equipment (e.g., gloves, eye protection).
- If you are unsure about any step, consult a qualified plumber.
4.2. Required Tools (Not Included)
- Adjustable wrench
- Screwdriver
- Basin wrench (optional, for tight spaces)
- Sealant tape (PTFE tape)
4.3. Installation Steps
- Prepare the Sink: Ensure the sink has a pre-drilled hole with a diameter of 35 mm. If not, a suitable hole must be created by a professional.
- Attach Connection Hoses: Screw the flexible connection hoses into the base of the faucet. Hand-tighten first, then use a wrench for a snug fit, being careful not to overtighten.
- Insert Faucet: Place the faucet into the prepared hole on the sink or countertop.
- Secure Faucet: From underneath the sink, slide the reinforcing plate (if using with a stainless steel sink) and then the rubber washer, metal washer, and mounting nut onto the threaded rod of the faucet. Tighten the mounting nut securely to prevent movement.
- Connect Water Lines: Connect the flexible hoses to the hot and cold water supply lines. Use sealant tape on the threads for a watertight seal. Ensure the hot and cold lines are connected correctly.
- Check for Leaks: Slowly turn on the main water supply and check all connections for leaks. Tighten any leaking connections as necessary.
- Flush the Faucet: Remove the aerator from the spout and turn on the water to flush out any debris from the lines. Reattach the aerator after flushing.
5. Operation
The BLANCO Actis/s Sink Faucet features a single lever for controlling both water flow and temperature.
- Water Flow: Lift the lever upwards to increase water flow. Push it downwards to decrease or turn off the water.
- Temperature Control: Move the lever to the left for hot water and to the right for cold water.
- Spout Rotation: The spout can be rotated 360° to direct water flow as needed.
Image 3: Diagram illustrating the 360-degree swivel capability of the faucet spout.
6. Maintenance
Regular maintenance will ensure the longevity and optimal performance of your BLANCO Actis/s Sink Faucet.
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the chrome finish.
- Limescale Removal: The patented jet regulator helps reduce limescale. For any visible limescale, use a mild descaling solution specifically designed for faucets, following the product instructions.
- Aerator Cleaning: Periodically unscrew the aerator from the spout and clean any accumulated debris or mineral deposits. Rinse thoroughly before reattaching.
- Check Connections: Occasionally check the water connections under the sink for any signs of leaks or corrosion.
7. Troubleshooting
If you encounter any issues with your faucet, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator; partially closed shut-off valve; debris in water lines. | Clean or replace aerator; ensure shut-off valves are fully open; flush water lines. |
| Leaking from Spout | Worn ceramic cartridge; debris in cartridge. | Contact customer support for cartridge replacement; clean cartridge if accessible. |
| Leaking from Base | Loose mounting nut; damaged O-rings/gaskets. | Tighten mounting nut; inspect and replace O-rings/gaskets if damaged. |
| Difficulty Adjusting Temperature | Faulty ceramic cartridge; incorrect hot/cold connections. | Verify hot/cold connections; contact customer support for cartridge inspection. |
If the problem persists after attempting these solutions, please contact BLANCO customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | BLANCO |
| Model Number | 517594 |
| Product Dimensions | 22.5 x 4 x 28 cm (L x W x H) |
| Item Weight | 2.65 kg |
| Color | Chrome |
| Style | Outlet |
| Finish Type | Chrome |
| Material | Ceramic (for cartridge) |
| Installation Method | One hole (Deck Mount) |
| Number of Handles | 1 |
| Spout Height | 190 mm |
| Spout Reach | 208 mm |
| Spout Rotation | 360° |
| Connection Hoses | 450 mm long, 3/8 inch nut |
| Recommended Hole Diameter | 35 mm |
Image 4: Technical drawing detailing the dimensions of the BLANCO Actis/s Sink Faucet. All measurements are in millimeters.
9. Warranty and Support
BLANCO products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official BLANCO website.
For technical assistance, spare parts, or any other inquiries, please contact BLANCO customer support. Have your model number (517594) and purchase date ready when contacting support.
BLANCO Official Website: www.blanco.com
