Vivitar DVR508NHD-BLU DVR-508 Digital Video Recorder User Manual

1. Introduction

Thank you for choosing the Vivitar DVR508NHD-BLU DVR-508 Digital Video Recorder. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

The Vivitar DVR508NHD-BLU is a compact digital camcorder designed to capture high-definition video and still images. Featuring 4x digital zoom and a 1.8-inch LCD screen, it allows you to record and review your memorable moments with ease.

2. Product Overview

2.1 Key Features

• 10 Megapixels for high-definition still image capture.
• 1080p Full High Definition video recording.
• 4x Digital Zoom for capturing distant subjects.
• 1.8-inch color LCD display for preview and playback.
• Supports SD memory cards (not included) for expandable storage.
• USB connectivity for easy transfer to a computer.

2.2 Package Contents

Verify that all items are present in your package:

• Vivitar DVR508NHD-BLU Digital Video Recorder
• USB Cable
• User Manual (this document)
• Note: Additional accessories such as an SD card and power adapter may be sold separately.

2.3 Device Layout

Familiarize yourself with the main components of your camcorder.

Figure 1: Front view of the Vivitar DVR508NHD-BLU Digital Video Recorder. Shows the lens, flash, and general body shape.

3. Setup

3.1 Inserting the Battery

1. Locate the battery compartment cover on the device.
2. Slide or lift the cover to open it.
3. Insert one Lithium Ion battery, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment cover securely.

Important: Use only the specified battery type. Incorrect battery insertion can damage the device.

3.2 Charging the Battery

1. Connect the small end of the USB cable to the USB port on the camcorder.
2. Connect the large end of the USB cable to a powered USB port on a computer or a compatible USB wall adapter (not included).
3. The charging indicator light will illuminate. Once charging is complete, the light may change color or turn off.

Allow sufficient time for the battery to fully charge before first use.

3.3 Inserting an SD Card

An SD (Secure Digital) memory card is required to store videos and photos. The card is not included.

1. Locate the SD card slot on the side or bottom of the camcorder.
2. Insert the SD card with the metal contacts facing the correct direction (refer to the diagram near the slot, if available) until it clicks into place.
3. To remove, gently push the card inward until it clicks, then release, and it will eject slightly.

Note: Ensure the camcorder is powered off before inserting or removing the SD card to prevent data loss or damage.

4. Operating Instructions

4.1 Powering On/Off

• To power on: Press and hold the Power button (usually marked with ⏻) until the LCD screen illuminates.
• To power off: Press and hold the Power button again until the screen turns off.

4.2 Recording Video

1. Ensure the camcorder is in video recording mode (check the mode icon on the LCD). If not, use the mode button to switch.
2. Frame your subject using the 1.8-inch LCD display.
3. Press the Record button (often marked with a red dot or camera icon) to start recording. A red indicator or timer on the screen will confirm recording is active.
4. Press the Record button again to stop recording. The video file will be saved to the SD card.

4.3 Taking Still Photos

1. Switch the camcorder to still photo mode (check the mode icon on the LCD).
2. Frame your shot using the 1.8-inch LCD display.
3. Press the Shutter button (often separate from the record button, or a half-press function) to take a photo. The image will be saved to the SD card.

4.4 Using Digital Zoom

The camcorder features 4x digital zoom.

• While in recording or photo mode, use the zoom in/out buttons (often marked with 'W' for Wide and 'T' for Telephoto, or '+' and '-') to adjust the zoom level.
• Note: Digital zoom magnifies the image electronically, which may result in a reduction of image quality compared to optical zoom.

4.5 Playback and Review

1. Switch the camcorder to playback mode.
2. Use the navigation buttons (up/down/left/right) to browse through your recorded videos and photos.
3. Press the OK/Play button to view a selected file.

4.6 Connecting to a Computer

To transfer your files to a computer:

1. Ensure the camcorder is powered on.
2. Connect the camcorder to your computer using the provided USB cable.
3. The camcorder should appear as a removable disk drive on your computer.
4. You can then copy files from the camcorder's SD card to your computer.

5. Maintenance

5.1 Cleaning the Device

• Use a soft, dry cloth to clean the exterior of the camcorder.
• For the lens, use a specialized lens cleaning cloth and solution. Avoid touching the lens with your fingers.
• Do not use harsh chemicals or abrasive cleaners.

5.2 Storage

• Store the camcorder in a cool, dry place away from direct sunlight and extreme temperatures.
• If storing for an extended period, remove the battery to prevent leakage.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Vivitar website. Keep your purchase receipt as proof of purchase.

Visit Vivitar Support Website