The Line 6 FB4 Floor Board is a compact and durable foot controller designed to enhance your Line 6 compatible devices. It provides quick access to four distinct settings, along with dedicated functions for Tap Tempo and Manual mode. Its robust construction, featuring an aluminum case and reliable switches, ensures longevity and consistent performance.
Product Overview
Image Description: This image displays the Line 6 FB4 Floor Board, a rectangular foot controller with a silver-colored aluminum casing and a black central panel. It features four metallic footswitches, clearly labeled "CHANNEL A," "CHANNEL B," "CHANNEL C," and "CHANNEL D." Below the central footswitches, there is text that reads "TAP LIT BUTTON FOR TAP TEMPO / HOLD LIT BUTTON FOR MANUAL," indicating the dual functionality of the illuminated buttons. The Line 6 logo and "FBV4" model name are also visible on the black panel.
Setup
Connecting the FB4
The FB4 Floor Board is self-powered through its locking cable, which is included with the unit. To connect the FB4 to your compatible Line 6 device:
Ensure your Line 6 device is powered off.
Locate the FBV/Pedal jack on your Line 6 device.
Connect one end of the locking cable to the FB4's input.
Connect the other end of the locking cable to the FBV/Pedal jack on your Line 6 device.
Power on your Line 6 device. The FB4 will receive power and be ready for use.
Compatibility
The FB4 is compatible with a range of Line 6 products. Please verify your device's compatibility before use:
Spider III (Note: Not compatible with Spider II 15 or Spider III 15)
Spider II
Flextone III
Vetta
Vetta II
HD147
POD 2.0 (Note: Only compatible with POD 2.0 units with pedal jacks labeled "FBV Pedal." Not compatible with older units having jacks labeled "Pedal.")
POD xt
POD XT Pro
Bass POD xt
Bass POD XT Pro
The FB4 is NOT compatible with: Ax212, Flextone I, II or HD, POD Pro, Bass POD, Bass POD Pro, and Spider (original series).
Operating Instructions
Channel Selection
The FB4 provides access to four distinct channels (A, B, C, D) on your compatible Line 6 device. To select a channel:
Press the footswitch corresponding to the desired channel (CHANNEL A, CHANNEL B, CHANNEL C, or CHANNEL D).
The selected channel's footswitch will illuminate, indicating it is active.
Tap Tempo Function
To set the tempo for effects like delay or tremolo on your Line 6 device:
While a channel is active, repeatedly tap the currently lit channel footswitch at your desired tempo.
The device will register the taps and adjust the tempo accordingly.
Manual Mode
Manual mode allows direct control over individual effects parameters on your Line 6 device, bypassing the stored channel presets. To activate Manual mode:
Press and hold the currently lit channel footswitch for a few seconds.
The footswitch will change its illumination pattern or color (depending on the connected device) to indicate Manual mode is active.
Refer to your Line 6 device's manual for specific instructions on controlling parameters in Manual mode.
Maintenance
The Line 6 FB4 Floor Board is designed for durability. Follow these guidelines to ensure its longevity:
Cleaning: Use a soft, dry cloth to clean the exterior. Avoid abrasive cleaners or solvents.
Storage: Store the unit in a dry environment, away from extreme temperatures and direct sunlight.
Cable Care: Handle the locking cable carefully. Avoid sharp bends or excessive pulling to prevent damage.
Environmental Protection: Protect the unit from moisture, dust, and excessive vibration.
Troubleshooting
Problem
Possible Cause / Solution
FB4 does not power on.
Ensure the locking cable is securely connected to both the FB4 and the compatible Line 6 device.
Verify that the Line 6 device is powered on.
Check if your Line 6 device is compatible with the FB4 (refer to the Compatibility section).
Inspect the locking cable for any visible damage.
Channels do not switch or respond.
Confirm the FB4 is powered on and connected correctly.
Ensure your Line 6 device is in a mode that accepts FBV commands.
Test each footswitch to ensure it is functioning mechanically.
Tap Tempo or Manual mode not working.
Ensure you are performing the correct action (tapping for Tap Tempo, holding for Manual mode).
Verify that your Line 6 device supports these functions via the FB4.
Consult your Line 6 device's manual for specific instructions on these features.
Specifications
Model: Line 6 FB4 Floor Board
Power: Self-powered via locking cable from compatible Line 6 device
Controls: 4 Footswitches (Channel A, B, C, D), Tap Tempo, Manual Mode
Construction: Aluminum case, durable footswitches
Item Weight: 2.84 pounds
Package Dimensions: 12.17 x 7.2 x 3.15 inches
ASIN: B0054W4KFU
Date First Available: March 7, 2014
Warranty and Support
For information regarding warranty coverage, technical support, or service, please refer to the official Line 6 website or contact Line 6 customer support directly. Keep your purchase receipt as proof of purchase for warranty claims.
Line 6 POD Pro Pilot's Handbook: Advanced Guitar Tones and Control Explore the revolutionary technologies, amp and cabinet modeling, effects, and advanced control options of the Line 6 POD Pro. This handbook details its features, setup, and integration with foot controllers like the Floor Board and FB4.
Line 6 HX Stomp オーナーズマニュアル Line 6 HX Stomp ギターマルチエフェクト・ペダルのオーナーズマニュアルです。機能、設定、接続方法、操作方法などを詳しく解説します。line6.jp/meet-hx-stomp で詳細情報も確認できます。
Line 6 HX ONE Owner's Manual - Guitar Effects Pedal This manual provides comprehensive instructions for the Line 6 HX ONE guitar effects processor, covering setup, operation, effects selection, looper functions, MIDI control, and advanced settings. Learn how to use your HX ONE for optimal performance.
Line 6 POD 2.0 Pilot's Handbook: Mastering Guitar Tones Explore the revolutionary technologies and tonal capabilities of the Line 6 POD 2.0 guitar effects processor. This handbook covers setup, controls, amp modeling, effects, MIDI control, and optional foot controllers like Floor Board and FB4.
Line 6 POD Go and POD Go Wireless Owner's Manual Discover the full potential of your Line 6 POD Go and POD Go Wireless guitar multi-effects processor. This owner's manual provides detailed guidance on setup, operation, amp and effect modeling, wireless features, connectivity, and advanced functions for musicians.
