XO XORFK03 Ductless Recirculating Kit Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the XO XORFK03 Ductless Recirculating Kit. This kit is designed to convert compatible XO range hoods (models XOV36S and XOJ36S) from ducted to ductless (recirculating) operation, filtering air and returning it to the kitchen.

Please read these instructions thoroughly before installation and retain this manual for future reference.

Safety Information

• Always disconnect power to the range hood before installing, servicing, or cleaning any components.
• Wear appropriate personal protective equipment, such as gloves, during installation.
• Ensure all components are securely fastened according to the instructions to prevent hazards.
• This kit is intended for use only with specified XO range hood models. Using it with other models may result in improper function or damage.

Kit Contents

The XORFK03 Ductless Recirculating Kit typically includes the following components:

• Duct adapter / Air diverter
• Charcoal filters (activated carbon filters)
• Filter frame or mounting bracket
• Mounting hardware (screws, etc., if applicable)

Figure 1: Overview of the XORFK03 Ductless Recirculating Kit components. Shown are the plastic air diverter, four rectangular charcoal filters, and a metal frame designed to hold the filters.

Setup and Installation

Follow these steps to install the ductless recirculating kit onto your compatible XO range hood. Refer to your range hood's primary instruction manual for specific details on accessing internal components.

1. Prepare the Range Hood:
   • Ensure the range hood is disconnected from the main power supply.
   • Remove any existing grease filters from the range hood.
   • If the hood was previously ducted, ensure the ducting is removed and the exhaust opening is clear for the recirculating adapter.
2. Install Charcoal Filters:
   • Place the charcoal filters into the provided filter frame or mounting bracket. Ensure they are seated correctly and securely.
   • Attach the filter assembly to the designated area within the range hood, typically near the motor or exhaust outlet. Consult your range hood manual for precise filter attachment points.
3. Attach Duct Adapter/Air Diverter:
   • Position the duct adapter (air diverter) over the range hood's exhaust opening. This component redirects the filtered air back into the kitchen.
   • Secure the adapter using the provided hardware or by snapping it into place, as per the design of your specific range hood model.
4. Reassemble and Test:
   • Reinstall any removed components of the range hood, such as the grease filters.
   • Reconnect the range hood to the power supply.
   • Turn on the range hood at various fan speeds to ensure proper operation and air recirculation.

Operating Principles

When the XORFK03 kit is installed, your range hood operates in a recirculating (ductless) mode. Instead of expelling air outside, the hood draws cooking fumes and odors through the grease filters, then through the activated charcoal filters. The charcoal filters absorb odors and smoke particles. The cleaned air is then redirected back into the kitchen through the air diverter.

This mode is suitable for installations where external ducting is not feasible or desired. It is important to note that recirculating hoods do not remove heat or moisture from the kitchen.

Maintenance

Regular maintenance of the charcoal filters is crucial for effective odor removal and optimal performance of your ductless range hood.

Charcoal Filter Replacement

• Frequency: Charcoal filters are not washable and must be replaced regularly. The replacement frequency depends on cooking habits, typically every 3 to 6 months. Heavy cooking may require more frequent replacement.
• Procedure:
  1. Disconnect power to the range hood.
  2. Remove the grease filters to access the charcoal filters.
  3. Carefully detach the old charcoal filters from their frame or mounting points.
  4. Install new XO replacement charcoal filters (part number may vary, refer to your hood manual or XO website for correct replacement filters).
  5. Reinstall the grease filters and reconnect power.

Cleaning

• Grease Filters: While not part of the XORFK03 kit, ensure your range hood's grease filters are cleaned regularly (typically monthly) to maintain airflow and prevent grease buildup. Refer to your range hood manual for cleaning instructions.
• Kit Components: The plastic duct adapter and metal frame can be wiped clean with a damp cloth and mild detergent if they accumulate dust or grease. Ensure they are completely dry before reassembly.

Troubleshooting

Specifications

• Model: XORFK03
• Compatibility: XO XOV36S, XO XOJ36S Range Hoods
• Function: Converts compatible range hoods to ductless (recirculating) operation.
• Kit Components: Duct adapter, charcoal filters, filter frame.
• Item Weight: Approximately 10 pounds (4.5 kg)

Warranty Information

Specific warranty details for the XORFK03 Ductless Recirculating Kit are typically provided with the original purchase documentation or can be found on the official XO Appliances website. Please retain your proof of purchase for warranty claims.

This kit's warranty is generally limited to manufacturing defects and does not cover normal wear and tear of consumable parts like charcoal filters, which require periodic replacement.

Customer Support

For technical assistance, replacement parts, or further inquiries regarding your XO XORFK03 Ductless Recirculating Kit, please contact XO Appliances customer support. Refer to the contact information provided in your main range hood manual or visit the official XO Appliances website for current support options.

Website: www.xoappliance.com (Example link, actual link may vary)