Philips 6-Outlet Adapter with Guidelight

Introduction

Thank you for choosing the Philips 6-Outlet Adapter with Guidelight, model SPS1060N/17. This product is designed to convert two standard grounded wall outlets into six, providing expanded power access for your electronic devices. It features a convenient, sensor-activated guidelight for added visibility in low-light conditions. Please read this manual carefully to ensure proper installation and safe operation of your new power multiplier.

Safety Information

• Indoor Use Only: This product is intended for indoor use in dry locations. Do not expose to moisture or wet conditions.
• Electrical Rating: Do not exceed the electrical rating of 15 Amps, 125 Volts AC, 60 Hz, 1875 Watts.
• Grounding: Ensure the wall outlet is properly grounded. This adapter provides grounded outlets.
• Avoid Overloading: Do not plug in appliances that individually or cumulatively exceed the maximum current rating.
• Children: Keep out of reach of children.
• Inspection: Inspect the adapter for any damage before each use. Do not use if damaged.
• Ventilation: Do not cover the adapter or block its ventilation openings.

Product Features

• Converts 2 grounded wall outlets into 6 grounded outlets.
• Integrated sensor-activated guidelight for low-light illumination.
• Compact design plugs directly into the wall, reducing cord clutter.
• Durable Acrylonitrile Butadiene Styrene and Polycarbonate construction.

Package Contents

The package contains one (1) Philips 6-Outlet Adapter with Guidelight (Model: SPS1060N/17).

Setup

1. Ensure the wall outlet you intend to use is a standard 3-prong grounded outlet and is easily accessible.
2. Align the two 3-prong plugs on the back of the Philips 6-Outlet Adapter with the corresponding receptacles of your wall outlet.
3. Firmly push the adapter into the wall outlet until it is securely seated. The adapter is designed to use both top and bottom outlets for stability.
4. Once plugged in, the guidelight will activate automatically in low-light conditions.

The back of the Philips 6-Outlet Adapter is shown, featuring two standard three-prong input plugs for connecting to a wall outlet. The image also indicates the product's approximate dimensions: 4.0 inches (101.6 mm) in height, 3.0 inches (76.2 mm) in width, and 1.0 inch (25.4 mm) in depth. Electrical ratings are also visible on the label.

This image shows the Philips 6-Outlet Adapter in use, plugged into a standard wall outlet. Several power cords are connected to its six outlets, illustrating how it expands available power connections and helps manage cord clutter in a typical room environment.

Operating Instructions

1. Once the adapter is securely plugged into the wall outlet, you can connect up to six electronic devices into the available grounded outlets on the front of the adapter.
2. Ensure that the total power draw of all connected devices does not exceed the adapter's maximum rating of 15 Amps / 1875 Watts.
3. The integrated guidelight will automatically turn on when the ambient light in the room is low and turn off when sufficient light is detected. This feature provides a subtle, constant glow for navigation in dark areas.

This image displays the front of the Philips 6-Outlet Adapter. It features six standard grounded AC outlets arranged in two rows of three. Above the top row of outlets, a rectangular guidelight is visible, designed to provide subtle illumination.

Maintenance

• Cleaning: Disconnect the adapter from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
• Storage: When not in use, store the adapter in a cool, dry place away from direct sunlight and moisture.

Troubleshooting

• No Power to Devices:
  • Ensure the adapter is fully and securely plugged into the wall outlet.
  • Verify that the wall outlet itself is functioning by plugging in another device directly.
  • Check if the total power draw of connected devices exceeds the adapter's 15 Amp / 1875 Watt rating. Unplug some devices if overloaded.
• Guidelight Not Working or Too Dim:
  • The guidelight is sensor-activated. Ensure the surrounding area is sufficiently dark for it to activate.
  • Check that the light sensor (small clear area near the guidelight) is not obstructed by furniture, curtains, or other objects.
  • Note that the guidelight is designed to provide subtle illumination, not bright room lighting. Its brightness may appear dim in comparison to other light sources.

Specifications

Warranty Information

This Philips 6-Outlet Adapter with Guidelight (SPS1060N/17) comes with a Limited-Lifetime Warranty. For specific terms and conditions, please refer to the warranty documentation provided with your purchase or contact Philips customer support.

Customer Support

If you have any questions, require assistance, or need to report an issue with your Philips 6-Outlet Adapter, please contact Philips customer support. Contact information can typically be found on the Philips official website or on the product packaging.